3D-printed carbon and silicon carbide components give industrial engineers another way to address demanding design and material requirements. Additive manufacturing can produce geometries that are difficult or costly to make using traditional processes, while infiltration and other post-processing steps can change the properties of a printed body. The result is a set of material options for applications where weight, heat, wear, corrosion or electrical behavior matters.
These materials are not interchangeable, and a printed shape alone does not determine whether a component is suitable. Selecting a process and material requires considering operating conditions, the desired properties and the refinement steps needed after printing.
Why use additive manufacturing for carbon and ceramics?
Binder jetting-based additive manufacturing can create features such as undercuts, cavities, hollow spaces and variable wall thicknesses. Such geometries may be challenging or expensive to produce through conventional ceramic manufacturing. The approach can also support prototypes and small production series, where design flexibility and production economics are important considerations.
In these material families, printing is part of a broader production route. A porous printed body can be infiltrated with polymer or liquid silicon, or undergo other post-processing. Heat treatment, carbonization, graphitization, chemical vapor infiltration with carbon, metal impregnation, coating and finishing are among the additional processes described for these components. The selected route affects the final material and should be considered during design.
Carbon 3D printing: choosing the right material route
The CARBOPRINT family combines carbon and graphite powder with additive manufacturing and post-processing. Its options include resin-bonded carbon, polymer carbon composites and ceramic carbon composites. Each offers a different balance of porosity, temperature resistance, strength and conductivity.
Resin-bonded carbon
CARBOPRINT C is a porous carbon body bonded with a duroplastic binder system. Its stated typical density is 1 g/cm³, with open porosity of 40–50%. This relatively open structure provides a basis for later treatment, including polymer impregnation or silicon infiltration. Depending on the application, further processing such as thermal treatment or densification may also be considered.
For engineers, the key design point is that the as-printed carbon body can serve as an intermediate material rather than the final specification. Its porosity creates opportunities to develop a different material through infiltration, but the requirements of the finished component should guide the choice.
Polymer and ceramic carbon composites
CARBOPRINT P is made by infiltrating CARBOPRINT C bodies with polymers. The material is described as temperature resistant up to 200°C. Resin selection can be used to adjust properties such as mechanical or chemical stability, so the component design and operating environment need to inform material selection.
CARBOPRINT Si takes a different route: CARBOPRINT C bodies are siliconized to create ceramic carbon composites. The listed material types have densities of 2.2–2.4 g/cm³, open porosity below 0.1% and flexural strengths of 65–110 MPa. The family is intended for applications requiring properties such as thermal shock resistance, wear resistance and performance in harsh or high-temperature environments.
Silicon carbide additive manufacturing for demanding conditions
SICAPRINT materials extend additive manufacturing to silicon carbide-based components. The material family includes polymer silicon carbide composites and ceramic silicon carbide composites, allowing designers to consider different combinations of performance and processing requirements.
SICAPRINT P is a polymer-infiltrated option for functional parts exposed to abrasive or corrosive fluids at constant temperatures up to 200°C. The listed variants have a density of 2.0 g/cm³ and Shore D hardness of 90. Depending on technical requirements, different resins can be selected. The material is positioned as an economical option where abrasion and corrosion resistance are important.
SICAPRINT Si is a ceramic silicon carbide composite. Its stated advantages include high hardness, thermal conductivity and temperature stability up to 1400°C. Across the listed variants, density ranges from 2.8 to 3.0 g/cm³, thermal conductivity from 120 to 170 W/(mK), and flexural strength from 110 to 180 MPa. These figures describe specific material types; they should not be treated as universal values for every part or application.
Designing parts around the application
Material selection is only one part of a successful additive manufacturing project. Geometry, process conditions and finishing requirements also influence whether a design can deliver the intended function. Design support can include 3D CAD/CAM drawing, design for additive manufacturing and numerical simulation. Relevant methods include finite element analysis for structural mechanics and computational fluid dynamics for fluid flow and heat transfer.
Simulation capabilities may also address geometry and topology optimization, process optimization, complex material models, microstructure, phase transitions and reaction kinetics associated with post-processing. These tools can help teams evaluate a part design and its production route together, rather than treating manufacturing as a step considered only after the geometry is fixed.
Potential component types span casting cores and molds, preforms, pump parts, sealings, chemical packings, spray nozzles, heat exchangers, burner nozzles and electric heaters. Whether any particular material is suitable depends on the component’s conditions and required properties.
Practical implications for industrial teams
For system integrators, plant engineers and product teams, the central opportunity is to connect material behavior with design freedom. A porous carbon body may be refined into a polymer or ceramic composite; a silicon carbide component may be selected for its hardness, thermal conductivity or resistance to demanding environments. Additive manufacturing can make complex forms more accessible, but post-processing and application requirements remain essential to the engineering decision.
Teams evaluating these parts should define the operating environment and functional requirements early, then compare candidate material routes and finishing steps. This approach helps establish whether the benefits of complex geometry and tailored materials justify using additive manufacturing for a prototype or small series. The practical value lies not simply in printing a shape, but in designing the complete material and production pathway around the job the component must perform.