Access Official Technical PDF

Share Summary:LinkedInEmail

3D printed electrodes offer a way to create customized conductive structures for electrochemical devices without relying solely on rigid, pre-sized substrates. In a proof-of-concept study, researchers used fused deposition modeling (FDM) and graphene-based conductive filament to produce electrodes for a solid-state supercapacitor and a photoelectrochemical (PEC) sensor. The results show how print geometry, electrode conductivity, and surface materials can work together in device development.

For industrial automation engineers and technical decision-makers, the work is relevant as an example of design-led fabrication: electrode shape and size can be defined digitally, while different active materials can be added for distinct functions. It is not a demonstration of a production-ready industrial sensor or energy-storage product, but it illustrates a manufacturing approach worth understanding.

How FDM produces a conductive electrode

FDM creates a part by extruding heated filament along a programmed path, building the object layer by layer. In this study, the printing material was a thermoplastic filament containing graphene. A commercial FDM printer formed the electrode body, including a narrow extension that could be used to make an electrical connection.

Unlike direct-ink-writing approaches, which extrude a slurry of active material and binder, filament-based FDM avoids the need to formulate an extrudable ink for the base structure. The researchers noted that ink formulation and additional drying or curing can complicate fabrication. With conductive filament, a shaped electrode can be printed directly from a digital model.

That distinction matters for prototyping. An electrode can be designed in a chosen shape and size, rather than cut from a rigid sheet or substrate. The study printed circular electrodes 17 mm in diameter and reported that eight electrodes could be printed in 30 minutes using its setup. These figures describe the reported experiment, not a general production rate for other printers, geometries, or materials.

Conductivity is central to 3D printed electrodes

A printable shape is only useful as an electrode if it can conduct current effectively and support the intended electrochemical reactions. The graphene-containing filament was conductive, but its surface resistance limited performance in the tested devices. The researchers therefore sputtered a thin gold layer onto the printed electrode, creating what they called a 3DE/Au electrode. Comparisons were also made with uncoated printed electrodes.

This is an important design consideration: the printed body, conductive coating, and active surface material each contribute to the completed device. The gold coating improved electrical conduction and affected charge transfer at the electrode-electrolyte interface. Accordingly, the study’s device results should not be read as evidence that every application can use a printed electrode without additional surface treatment.

The electrode surfaces were functionalized with different materials according to the intended application:

  • For energy storage: polypyrrole and reduced graphene oxide (Ppy/rGO) were deposited on the electrode.
  • For sensing: cadmium sulfide (CdS) nanoparticles were applied to form the photoactive surface.

The ability to use electrochemical deposition or physical application to add functional materials makes the printed structure a potential platform for application-specific electrode development.

Supercapacitor performance and design trade-offs

To evaluate the electrode for energy storage, the researchers assembled a symmetrical solid-state supercapacitor. Two Ppy/rGO-coated electrodes were separated by a PVA-KOH gel electrolyte. The gold-coated version delivered a reported specific capacitance of 98.37 F g-1 at a current density of 0.5 A g-1, compared with 32.46 F g-1 for the version without the gold coating.

Electrochemical impedance measurements also indicated lower charge-transfer resistance for the gold-coated electrode: 1.3 Ω compared with 15.4 Ω for the uncoated version. The reported equivalent series resistance decreased from 27.5 Ω to 24.7 Ω. Together, these measurements show why electrical interfaces matter when evaluating a printed electrode. The geometry provides the structure, but conductivity and contact with the electrolyte influence the measured device behavior.

There was also a durability limitation. The gold-coated supercapacitor retained 81.94% of its capacitance after 100 charge-discharge cycles, but retention fell to 12.15% after 1,000 cycles. The researchers associated the decline with electrolyte evaporation and degradation of the Ppy/rGO layer. For device development, this underlines the need to assess the complete assembly—including electrode material, electrolyte, and packaging—rather than treating printability as a proxy for long-term reliability.

Photoelectrochemical sensing with a printed platform

The second demonstration used CdS nanoparticles to make a PEC sensor for copper ions. Under illumination, CdS generates photoexcited electrons that can contribute to a measurable current. In the reported setup, the gold-coated printed electrode produced a photocurrent response of 724.1 μA, compared with 309.1 μA for the uncoated printed electrode.

When copper ions were introduced, the photocurrent decreased. The study explains this response through interactions involving Cu2+ and the CdS surface, which interrupt electron transport. The change in photocurrent correlated with copper-ion concentration across the tested range, and the reported detection limit was 0.05 μM. The authors presented this as a potential alternative to conventional transparent ITO or FTO glass electrodes for PEC sensing. It remains a specific laboratory demonstration, not a general performance claim for other analytes or operating conditions.

What the approach means for device development

For engineers and integrators, the practical lesson is that FDM can make electrode geometry a more accessible design variable. A digital workflow can support customized shapes, while conductive filament provides a printable base for subsequent functionalization. This may be useful during early-stage development when comparing architectures or adapting an electrode to a particular test setup.

Before applying the approach to a new device, teams would need to validate the relevant material conductivity, coating process, electrical connections, electrolyte compatibility, and cycling or measurement stability. The study’s results depended on a gold surface layer and application-specific active materials; changing those elements may change performance.

Conclusion

FDM-based 3D printed electrodes demonstrate how additive manufacturing can combine custom geometry with electrochemical functionality. In the reported work, coated electrodes supported both a solid-state supercapacitor and a copper-ion PEC sensor, with performance strongly influenced by surface conductivity and device construction. The approach is best viewed as a flexible fabrication option for prototyping and research, with durability and application-specific validation remaining essential steps before wider deployment.

Access Official Technical PDF

About The Author