Access Official Technical PDF

Share Summary:LinkedInEmail

Solar PV battery storage is a system-design decision, not simply a matter of choosing a battery with enough capacity. Engineers and project teams also need to account for power-converter losses, the timing of solar generation, battery chemistry and the electrical behavior of the battery bank. Understanding these factors helps align a PV system with its intended operating conditions.

Why converter efficiency matters

PV systems use DC-DC and DC-AC converters to manage electrical power. Their efficiency is the useful output power divided by the sum of output power and power dissipated as losses: η = Po / (Po + Pd). In other words, efficiency depends on how much input energy is converted into usable output rather than heat or other losses.

Converter losses can be grouped into inductor losses, switching losses and other losses. Inductor loss depends on current and the inductor’s resistance: PL = IL,rms2RL. Switching losses vary with the type of semiconductor switch, while other losses can include resistance in the circuitry between switches.

For an inverter, efficiency is commonly expressed as AC output power divided by DC input power: ηinv = PAC / PDC. This efficiency is not necessarily constant across operating conditions. At lower output power, the inverter’s own consumption and the energy needed to control semiconductor devices make up a larger share of the total. Efficiency can also decline when DC input voltage moves away from the nominal value, as conversion losses increase.

These characteristics matter when estimating system performance. A design assessment should consider expected operating power and input voltage, rather than relying on a single efficiency figure as if it applied under every condition.

Match storage to PV generation patterns

Solar generation varies on several timescales. Output changes over the course of a day, from one day to another as weather and cloud cover change, and between seasons as irradiance changes. Storage can help address these variations, but the appropriate technology depends on the duration and scale of the storage requirement.

A Ragone chart compares storage technologies by specific energy and peak power density. This helps distinguish technologies that can store substantial energy from those that can deliver high power. Solar applications generally need adequate energy density and, depending on the use case, sufficient power density. Capacitors can deliver power but have poor energy density for storing solar energy over longer periods.

Batteries are widely used for short- to medium-term storage in small and medium-sized PV systems because their energy and power characteristics suit daily storage needs. Seasonal storage at large scales remains a different challenge. Other approaches include pumped water, compressed air, hydrogen conversion and flywheels, but batteries offer practical implementation and efficiency advantages for the applications discussed here.

Compare battery chemistries and tradeoffs

Primary batteries deliver energy through an irreversible chemical reaction. Rechargeable, or secondary, batteries can be charged by applying an over-potential, storing electrical energy as chemical energy. PV systems use secondary batteries.

  • Lead-acid: A mature battery technology with relatively low cost in the comparison presented here, but lower gravimetric and volumetric energy density than the other battery types discussed.
  • Nickel-metal hydride (NiMH): Offers high energy density, but can have a high self-discharge rate.
  • Nickel-cadmium (NiCd): Has lower energy density than lithium-ion and can experience memory effect. Cadmium toxicity is also a concern.
  • Lithium-ion and lithium-polymer: Offer high energy density, but the source identifies cost and technology maturity as considerations.
  • Redox-flow: Stores chemical energy in separate liquid electrolytes. Increasing tank size can increase energy capacity, while adding membrane cell area can increase output power. Pumps and other supporting components make the system more complex.

Battery comparisons can also use gravimetric energy density, measured in watt-hours per kilogram, and volumetric energy density, measured in watt-hours per litre. Higher gravimetric density can reduce battery mass; higher volumetric density can reduce the space required. These measures describe different design constraints and should be considered alongside power requirements and cost.

Understand lead-acid battery behavior

A lead-acid battery contains cells with a nominal voltage of about 2 V each. Six cells connected in series form a typical 12 V battery. The cells use diluted sulphuric acid as the electrolyte, with lead as the negative active material and lead dioxide as the positive active material.

During discharge, electrons travel from the negative electrode through the external circuit to the positive electrode, while chemical reactions involve the plates and electrolyte. Charging reverses the reaction. In a PV system, the PV array can provide charging power; in a grid-connected system, an inverter operating as an AC-DC converter can also charge the battery.

A simple equivalent circuit represents a battery bank as an open-circuit voltage, VOC-BB, in series with internal resistance, Ri. The open-circuit voltage changes with state of charge and temperature, among other factors. The terminal voltage therefore differs from the open-circuit voltage when current flows. Internal resistance also causes power loss: PBB(loss) = IBB2Ri. This loss occurs during both charging and discharging.

Use ratings as design inputs, not assumptions

PV batteries are commonly described by nominal voltage, such as 12 V, 24 V or 48 V, but actual operating voltage varies with state of charge and temperature. Capacity, expressed in ampere-hours, describes the charge a battery can deliver at its rated voltage. It is related to the quantity of active electrode material; it is distinct from cell voltage, which is more closely tied to the battery chemistry.

For system planning, evaluate converter performance across expected loads and voltages, then select storage based on the required energy and power characteristics. Include battery losses and recognize that nominal voltage and capacity do not by themselves describe operating behavior. These practical checks help engineers, integrators and plant decision-makers specify PV storage that better reflects real system conditions.

Access Official Technical PDF

About The Author