Access Official Technical PDF

Share Summary:LinkedInEmail

Understanding how processing affects the structure of organic semiconductor thin films is a challenge for materials development. Molecular arrangement and the boundaries between ordered regions influence how charge and excitations move, yet conventional electron microscopy can struggle to reveal this structure. Organic materials may have complex, hierarchical morphologies and can be damaged by the electron beam. 4D-STEM imaging offers a way to map local crystalline order by collecting a diffraction pattern at each position in a scanned area.

Although this technique is rooted in materials science rather than factory automation, its approach illustrates a broader principle relevant to technical decision-makers: useful process insight depends on measuring the right properties at the right scale. In this case, diffraction data make it possible to compare how casting additives and thermal treatment affect the organization of organic films.

What 4D-STEM imaging measures

In scanning transmission electron microscopy (STEM), a focused electron probe moves across a sample. In four-dimensional STEM, or 4D-STEM, a two-dimensional diffraction pattern is recorded at every two-dimensional probe position. The resulting data combine the scan coordinates with the dimensions of each diffraction pattern.

Those patterns contain information about the spacing and orientation of ordered regions. By identifying diffraction spots associated with a material’s lattice, researchers can map local orientations across the film. The method therefore provides more than a conventional image of surface or mass contrast: it can reveal how crystalline domains are arranged, where orientations change, and how ordered regions connect across larger areas.

Beam sensitivity remains a practical constraint. In the reported experiments, the samples were cooled with liquid nitrogen to help preserve long-range order, and acquisition conditions were adjusted to limit damage. A 10-nanometre scan step was the minimum used before the beam began damaging crystallinity in nearby, not-yet-scanned regions. The electron probe itself was approximately 2 nanometres wide, but damage outside the immediate probe area limited the usable scan spacing.

Processing changes the morphology of T1 films

The study examined two organic semiconductor systems. In the small-molecule material T1, films were compared with and without the processing additive 1,8-diiodooctane (DIO). Conventional high-angle annular dark-field images provided little information about the film’s internal structure. Maps derived from 4D-STEM diffraction, by contrast, showed distinct differences between the samples.

Without DIO, the T1 film had a liquid-crystal-like morphology. Ordered regions changed orientation smoothly over distances of about 100 nanometres, with rotational defects called disclinations visible in the orientation maps. Small fragments, roughly 10 to 50 nanometres across, also appeared to overlap the larger features.

The DIO-treated film showed a more clearly segmented structure. Domains extended over hundreds of nanometres and were separated by identifiable grain boundaries, although orientations still fluctuated slightly within grains. Diffraction patterns also indicated that differently oriented domains overlapped through the film thickness. The measurements could identify overlapping orientations, but not determine which domains lay above or below others along the electron beam.

This distinction matters when interpreting morphology. A single image may not show whether a region is one continuous domain or a superposition of structures. Mapping diffraction at each scan position provides evidence of local orientation and overlap that can help characterize this complexity.

Annealing reveals mesoscale order in PBTTT

The second material, the semiconducting polymer PBTTT, was compared in as-cast and annealed states. The annealed film had been heated into its liquid-crystalline mesophase at 180 °C. The study used orientation maps and flow-line visualizations to compare how the polymer’s backbone direction varied across the films.

The as-cast sample showed little mesoscale order, and its crystalline regions were small and randomly oriented. After annealing, orientation patterns extended across domains hundreds of nanometres wide. Rather than ending abruptly at every domain boundary, ordered regions blended into one another through continuous changes in backbone direction.

These observations align with the reported relationship between PBTTT’s orientational order and charge transport. The work notes that annealing increases the material’s order and that mobility can increase after treatment in the mesophase. The microscopy does not, by itself, establish every cause of a device-level change; instead, it provides structural measurements that can be compared with electrical characterization and other methods.

From orientation maps to quantitative comparisons

Visual maps help show morphology, while spatial autocorrelation provides a way to summarize how orientation similarity changes with distance. The analysis compares the orientation at one probe location with orientations at other locations, grouping results by separation distance and relative angle.

For untreated T1, orientation differences spread gradually as the distance between locations increased, consistent with smoothly bending lattice orientations. In DIO-treated T1, the correlation dropped sharply around a misorientation of 15 degrees, indicating that most orientations within individual grains stayed closer together. The as-cast PBTTT sample showed no visible correlation beyond about 50 nanometres, whereas the annealed sample displayed longer-range correlations.

Such measurements make it possible to compare samples using characteristics beyond an overall impression of “more” or “less” order. They can describe domain continuity, orientation variation and the length scale over which neighboring regions remain correlated. Those data may also support comparisons with models of deposition and growth, or inform later charge-transport simulations.

Practical implications for materials characterization

For teams developing organic electronic materials, the central value of 4D-STEM is its ability to connect local diffraction signatures to structure across multiple length scales. It can distinguish smoothly rotating, liquid-crystal-like arrangements from segmented grains, identify certain defects, and reveal when differently oriented domains overlap. Applying the method requires careful management of electron-beam damage, and its findings are most useful alongside complementary measurements and device-property data.

The broader takeaway is that process changes should be evaluated through structural evidence at scales relevant to material function. In the examples examined, adding DIO altered T1 morphology, while annealing increased mesoscale order in PBTTT. 4D-STEM imaging makes these differences measurable, providing a foundation for more informed structure–property analysis in organic semiconductor thin films.

Access Official Technical PDF

About The Author