Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial wireless networks must support growing data needs while accounting for coverage, interference, mobility and the requirements of the operating environment. LiFi communication, also known as visible light communication (VLC), offers another way to carry wireless data: it modulates light from an LED source so a receiver can detect information in the illumination. Rather than replacing WiFi or cellular systems, LiFi is best understood as a complementary approach with distinct strengths and constraints.

What LiFi communication does

Conventional WiFi and cellular networks transmit information using radio-frequency (RF) electromagnetic waves. LiFi uses light in the visible band instead. An LED is switched or varied at a speed too fast for the human eye to perceive, and a photodiode at the receiving end detects those changes. The receiver translates them into data.

Early, simpler systems used on-off keying: the presence or absence of light represented information. This approach can offer a relatively straightforward implementation, but at higher data rates its limitations become more significant. More advanced LiFi systems use orthogonal frequency-division multiplexing (OFDM), dividing data among multiple parallel subcarriers. This allows several lower-rate streams to be transmitted together.

LEDs are useful for this purpose because their output can be intensity-modulated. A lighting fixture can therefore provide illumination and transmit data at the same time. The information is carried by controlled changes in light output, rather than by a visible flicker.

Why consider LiFi for industrial wireless networks?

LiFi’s most relevant characteristic for many industrial settings is that light does not pass through most everyday surfaces. This helps keep a transmission localized to the illuminated area. In contrast, RF signals can travel through walls and other common building materials. The localized coverage may be useful where communications are intended to remain within a room or defined area, although it should not be mistaken for encryption or complete security.

The visible spectrum also occupies a much higher frequency range than the radio bands used for WiFi and cellular communications. The whitepaper describes this broad spectrum as a potential source of additional communication capacity. In practice, available system performance depends on implementation, including the LED source, receiver and modulation method; the spectrum alone does not establish a guaranteed data rate.

Another potential advantage is reduced sensitivity to the multipath fading associated with RF propagation. In RF systems, signals reflected from buildings and other objects may arrive at a receiver along different paths and combine constructively or destructively. Deep fades can result in signal loss, which systems address with channel modelling and digital signal processing. The whitepaper explains that the very short wavelength of visible light means these effects occur at a scale averaged by the photodiode, reducing the need for comparable channel-tracking algorithms.

Because LiFi uses light rather than RF transmissions, it may also be considered in environments where RF operation is restricted or where interference with sensitive electronic systems is a concern. The source identifies hospitals, aircraft and chemical plants as examples. Suitability in any specific facility still depends on its technical and operational requirements.

Deployment considerations and limitations

LiFi’s localized nature is both an advantage and a design constraint. Light-based links generally require a suitable optical path between the transmitter and receiver; they are not intended to provide the long-range, non-line-of-sight outdoor coverage associated with radio networks. A signal that does not pass through walls may limit unintended reception, but it also means that coverage must be considered room by room or fixture by fixture.

For industrial system integrators and operations teams, key questions include:

  • Coverage: Are the required devices within the intended area served by the light source?
  • Mobility: Does the application require handover as users or equipment move between access points?
  • Network design: Can multiple optical access points work together to provide the needed connectivity?
  • Existing infrastructure: Can suitable LED lighting support the proposed system, and what additional communication equipment is required?
  • Fallback connectivity: Does the application also need WiFi or cellular coverage for links that light cannot provide?

LiFi has developed beyond a single transmitter-to-receiver link. The whitepaper describes bidirectional, multi-user systems and networks with multiple access points and seamless handover. These capabilities make mobility possible within a LiFi network, but they do not remove the need to plan coverage or account for transitions between different types of network.

Accordingly, LiFi and RF are complementary rather than competing technologies. RF remains suited to long-range and non-line-of-sight communication, while optical links can add localized capacity where their coverage characteristics fit the application. A combined architecture can use each method for the conditions it handles best.

LiFi for indoor positioning

Visible light can also support indoor location sensing. A smartphone camera or another two-dimensional image sensor can detect signals from overhead fixtures and estimate a device’s position using angle-of-arrival information. The whitepaper describes positioning accuracy on the order of tens of centimetres, compared with about ten metres for RF-based GPS, while noting that the positioning application requires only a low data rate.

This capability may be relevant to indoor navigation or location-aware services. For industrial use, it is important to distinguish a positioning link from a high-throughput communications link: they serve different purposes and can have different data-rate requirements.

Conclusion: plan LiFi as part of a wider connectivity strategy

LiFi provides a way to transmit data through modulated LED light, with potential benefits in localized coverage, indoor capacity and environments where RF is unsuitable. Its dependence on light coverage also limits its role in long-range or non-line-of-sight communication. For automation engineers and decision-makers, the practical question is not whether LiFi replaces existing wireless networks, but where an optical link can complement them. Evaluating coverage, mobility, access-point design and the need for RF backup will help determine whether LiFi fits a particular industrial application.

Access Official Technical PDF

About The Author