Access Official Technical PDF

Share Summary:LinkedInEmail

MEMS sensors and related micro/nano technologies are expanding how engineers detect, handle and respond to physical and chemical signals. The research presented at IEEE-NEMS 2020 illustrates several directions relevant to industrial automation: reducing sensor power demand, integrating sensing materials with microfabricated platforms, and making complex microfluidic or nanomaterial systems more accessible to users. While many applications discussed were biomedical, the underlying engineering themes—device integration, materials selection, reliability and manufacturing—also matter to automation engineers and technical decision-makers.

MEMS sensors bring sensing functions closer to the source

Microelectromechanical systems can combine small-scale mechanical structures, electronic components and sensing materials in compact platforms. One area of development is gas detection, where real-time remote monitoring of pollutants and toxic gases creates a need for compact devices with careful attention to power consumption. The conference program described several approaches to lower-power or self-powered gas sensing, each based on a different way to activate or read a sensing material.

One approach places sensing nanomaterials on suspended microheaters. Microfabricated structures—including heating plates, membranes and strip heaters—can support local synthesis and integration of materials such as metal-oxide nanowires or nanotubes. Other designs use suspended nanowires that heat through electrical current, or integrate metal-oxide sensing materials with micro light-emitting diodes for light-activated operation. A further approach uses gas-induced optical changes in micro- and nanostructures to produce a photovoltaic signal, avoiding the need for an external power source in that sensing configuration.

These are distinct device strategies rather than interchangeable solutions. For system designers, they illustrate the importance of matching the sensor’s activation method, power budget and material platform to the intended monitoring task.

Wearable electrochemical sensors and continuous measurement

Wearable electrochemical sensors extend measurement from a fixed instrument to the body of the person being monitored. The work highlighted at IEEE-NEMS included flexible sensors for non-invasive measurement of metabolites and electrolytes, as well as multiplexed microneedle arrays for minimally invasive sensing. Potential form factors included devices placed on the skin, beneath it or inside the mouth.

The technical challenge is broader than simply shrinking an electrode. A wearable sensing platform must bring together sensing chemistry, flexible materials, energy considerations and device integration. It must also support the collection and timely communication of measurements. The research described focused on preparation and characterization, alongside the practical challenges and future prospects of these systems.

Although the use case is healthcare, the design principle has wider relevance: effective distributed monitoring depends on integrating the sensor element with the platform that powers, handles and communicates its output.

Digital microfluidics: controlling droplets with electrical signals

Digital microfluidics uses electrical signals to manipulate individual liquid droplets on a chip. A prominent method is electrowetting-on-dielectric, or EWOD, in which an electrical field changes how a droplet interacts with a surface. This enables liquid handling without relying on conventional continuous-flow channels for every operation.

EWOD has supported research and commercial activity, but its dependence on a dielectric layer and hydrophobic topcoat creates distinctive reliability challenges. Those materials can become bottlenecks when moving from an apparently simple concept to a dependable device. Electrodewetting has also emerged as an alternative mechanism for digital microfluidics, offering another route to droplet control.

A further challenge is the effort required to develop and manufacture the device itself. The cybermanufacturing concept presented at the conference aims to reduce those engineering hurdles, so that researchers, entrepreneurs, students and other users can concentrate more on their applications. For industrial teams evaluating microfluidic methods, this highlights a familiar adoption issue: a promising function is not enough unless the platform can be made and maintained reliably.

Nanomaterials connect device function and manufacturing

Across the program, nanomaterials appeared in sensing, electronics, energy and biomedical systems. Examples included two-dimensional materials, carbon nanotubes, nanoparticles and structured nanofibers. The research on mixed-dimensional heterostructures showed how materials with different physical dimensions can be assembled through non-covalent interactions, rather than being limited to conventional epitaxial growth. Solution-based assembly and printing methods were discussed as ways to form thin films for electronic and energy applications.

Other work focused on programmable assembly: using DNA-based methods to organize inorganic nanoparticles, proteins and enzymes into periodic or hierarchical structures. The aim is to create architectures with selected properties and functions. In a separate example, keratin extracted from animal hair was organized into fibers with hydration-responsive shape-memory behavior, using fiber spinning and 3D printing as manufacturing routes.

These examples are at different stages and serve different applications, but they point to a shared engineering concern: the relationship between material structure, device behavior and repeatable fabrication. For automation and manufacturing professionals, that relationship shapes whether a material concept can be translated into a processable component.

Implantable sensors and surface engineering

Research on implantable devices also connected nanoscale surfaces with sensing and biological response. The conference presentation described nanosensors associated with implanted biomaterials that can communicate information about cellular events to handheld devices. It also discussed sensor concepts that could communicate back to release molecules intended to influence infection, inflammation or tissue growth. The work emphasized the need for development and regulatory approval; it should not be read as a general capability of all implant materials.

Another presentation examined silver nanoparticles embedded near the surface of thin silica coatings. In tests involving the yeast Candida albicans, released silver ions reduced adhesion forces and led to the death of adhered cells. The surrounding protein environment affected adhesion, underscoring that surface performance depends on more than the coating alone. The work also raised the need to control silver release and consider potential environmental risks associated with nanoparticle use.

Practical implications for automation teams

The IEEE-NEMS 2020 program covered a wide range of basic and applied research, but several practical questions recur across these technologies:

  • Power and activation: Determine how a sensor is heated, illuminated or otherwise activated, and what that means for the system’s energy requirements.
  • Materials and interfaces: Assess how sensing layers, coatings and structural materials interact, including the effect of the operating environment.
  • Reliability and fabrication: Consider whether the device can be manufactured consistently and whether its critical layers or interfaces create maintenance or lifetime concerns.
  • Integration: Evaluate how the sensor or microfluidic device connects to power, data handling and the wider automation architecture.

Conclusion

MEMS sensors and micro/nano engineering are advancing through the combined development of sensing materials, device structures and manufacturing methods. Low-power gas detection, wearable electrochemical monitoring, EWOD-based droplet control and assembled nanomaterials each address different needs, yet all depend on sound integration and attention to reliability. For industrial decision-makers, the central lesson is to assess the complete platform—not only the sensing principle—including its power strategy, materials, fabrication pathway and fit with the intended system.

Access Official Technical PDF

About The Author