Access Official Technical PDF

Share Summary:LinkedInEmail

Photovoltaic cells convert light into electricity and are a familiar technology for large-scale solar generation. They may also have a role in industrial automation at a smaller scale: harvesting energy for wireless sensors that need to operate without frequent battery replacement. Silicon remains the established material for PV cells, but its processing requirements and physical limitations have encouraged exploration of alternative semiconductors, cell architectures, and manufacturing approaches.

How photovoltaic cells generate electricity

A photovoltaic cell uses a semiconductor junction to turn light into electrical current. In a typical cell, the junction is formed between two types of semiconductor material: n-type and p-type. Electrons act as current carriers in the n-type material, while electron vacancies, called holes, act as carriers in the p-type material.

When light enters the semiconductor, photons with suitable energy can release electrons from their atoms. The junction helps separate the resulting charge: electrons move toward the n-type side, while holes remain on the p-type side. This separation creates a voltage. If the two sides are connected through a conducting path, electrons can flow through the circuit as direct current (DC).

A commercial PV cell contains many such junctions, and cells are assembled into modules and panels. An inverter can convert the DC output to alternating current (AC) for applications that require it or for connection to an electricity distribution grid.

Why silicon dominates PV production

Crystalline silicon is the material used in most installed photovoltaic cells. Its widespread use reflects both its suitability for converting light into electricity and its availability. Manufacturing has also benefited from techniques and facilities developed for the integrated circuit industry, which uses silicon wafers.

Silicon’s advantages do not eliminate its trade-offs. Producing the large wafers used in PV panels involves complex, energy-intensive processing. The material is also fragile, and single-junction silicon cells have a theoretical efficiency ceiling. These considerations can make conventional silicon panels a poor fit for some applications, even as production at scale and falling panel prices support their use in large-scale electricity generation.

Band gap and the limits of conversion

A semiconductor’s band gap is the energy needed to move an electron into a state where it can contribute to electrical conduction. The energy carried by a photon depends on its wavelength. If a photon does not have enough energy to bridge the band gap, it cannot release an electron. If it carries more energy than necessary, the excess does not become additional useful electrical output and instead contributes to heating the material.

This relationship helps explain why a single semiconductor cannot convert all incoming sunlight into electricity. The theoretical efficiency limit for a single-junction cell depends on the semiconductor’s band gap. Improving PV performance therefore involves more than choosing a material that absorbs light; the cell design must also manage the range of photon energies in sunlight.

Alternative photovoltaic technologies

Research and development have explored materials and structures that address some limitations of conventional silicon cells. The alternatives described include compound semiconductors such as gallium arsenide and gallium phosphide, as well as perovskite materials. Different PV architectures and assembly methods include concentrated photovoltaics, multijunction cells, thin films, and large crystals.

These approaches are not interchangeable, and their relevance depends on the intended application. Concentrated PV uses an architecture that focuses energy, while multijunction cells combine multiple semiconductor junctions. Thin-film construction and large-crystal approaches represent other ways to build PV devices. The aim across these options is to improve characteristics such as energy efficiency, durability, or suitability for a particular use.

Silicon is expected to remain important in large-scale electricity generation, supported by volume manufacturing and declining prices. Alternative technologies may be better suited to narrower applications where factors such as compact size, durability, or energy conversion are especially important.

Potential for industrial IoT energy harvesting

One potential niche is powering wireless Internet of Things (IoT) sensors. In industrial environments, wireless sensors can support monitoring and data collection, but their operation depends on a reliable power source. A compact PV cell that can harvest light to charge a device’s battery could help a sensor operate with little or no maintenance, depending on the application and conditions.

This is not simply a matter of selecting the most efficient cell. For an IoT device, the technology also needs to be appropriately sized, durable, and economical. An alternative PV design that does not compete with silicon panels for utility-scale production could still be valuable if it meets the requirements of a small sensor or another specialized device.

Conclusion

Photovoltaic cells rely on semiconductor junctions to convert light into electrical current, and silicon’s availability and manufacturing base have made it the leading material for PV production. Its processing demands, fragility, and single-junction efficiency limit create reasons to consider other materials and designs. For industrial automation decision-makers, the practical opportunity is to match the PV technology to the use case: silicon for established large-scale generation, and potentially different PV approaches for compact energy harvesting, including wireless IoT sensors. The right choice depends on the application’s power needs and requirements for size, durability, and cost.

Access Official Technical PDF

About The Author