Industrial automation depends on increasingly capable electronic systems, from control hardware to the computing platforms that process data and execute logic. At the device level, however, conventional silicon transistors face physical limits that make continued improvements in performance and power efficiency harder to achieve. III-V transistors—devices made with compound semiconductors such as InGaAs—are being investigated as one way to extend logic scaling. Their potential depends not only on material properties, but also on new device architectures, reliable interfaces and practical integration with silicon.
Why transistor scaling needs new approaches
For decades, reducing transistor dimensions increased device density and improved microprocessor performance while lowering cost. That strategy is now constrained by effects that emerge as silicon complementary metal oxide semiconductor (CMOS) field-effect transistors become smaller. Leakage current rises, while supply-voltage scaling has stalled around 0.8–0.9 V in the context described by the research. Because power consumption is a central concern, future devices need to operate at lower voltage without sacrificing useful current drive.
Two complementary strategies are under investigation. One is to improve electrostatic control by changing the transistor’s physical structure. The other is to use channel materials or switching mechanisms that can sustain operation at lower voltage. III-V materials are attractive for n-channel devices because compounds such as InAs and InGaAs can provide high electron injection velocity. For p-channel devices, germanium and materials including GaSb, InSb and InGaSb are also considered promising. A CMOS implementation must ultimately address both n- and p-channel devices, which makes material integration a broader challenge than improving a single transistor.
III-V transistors and the move to 3D channels
In a planar transistor, the gate controls the channel from above. As gate lengths shrink, the gate has more difficulty controlling the channel along its full length, contributing to short-channel effects. FinFETs and trigate devices address this by placing the channel in a narrow, fin-like structure that the gate controls from multiple sides. A gate-all-around (GAA) nanowire FET takes this further: the gate surrounds a cylindrical channel.
More complete gate control helps suppress short-channel effects and supports a steeper transition between the OFF and ON states. That transition is measured by subthreshold swing, expressed in millivolts per decade of drain current. For conventional MOSFETs, the room-temperature lower limit is approximately 60 mV/decade. Better electrostatic control can help devices scale to shorter gate lengths, but it does not by itself remove that fundamental limit.
III-V channel materials offer a separate potential advantage. In a nanoscale FET, ON-current depends in part on carrier injection velocity and the density of available electronic states. The high electron injection velocity of InGaAs and InAs makes them candidates for n-channel MOSFETs that could deliver higher current than silicon at a given voltage. In principle, that could enable a lower operating voltage for a comparable current target. Demonstrating this advantage in a scaled, manufacturable device remains the important engineering test.
Gate interfaces and resistance remain critical
A promising channel material is not sufficient on its own. A MOSFET’s gate stack—a metal gate and a dielectric layer above the channel—must control channel charge effectively. The dielectric needs suitable thickness and electrical properties, while the interface with the semiconductor must have few defects. Interface states can shift threshold voltage, reduce mobility, worsen subthreshold swing and contribute to instability.
III-V materials lack the convenient native oxide interface available with silicon. Their native oxides can cause Fermi-level pinning, limiting the gate’s ability to control the channel. Research has explored high-permittivity dielectrics, including aluminum oxide and hafnium oxide, deposited using atomic layer deposition, as well as surface treatments and interfacial layers. The goal is to reduce interface-state density and equivalent oxide thickness while maintaining mobility as the gate stack is scaled. Interface roughness, Coulomb scattering and remote phonon scattering can all undermine channel performance.
Parasitic resistance is another bottleneck. Contact resistance, source-drain access resistance and other resistance in the path to the channel reduce the current available from the device. Self-aligned process designs can bring contacts closer to the gate, while contact materials and source/drain engineering are being developed to reduce resistance. These details become especially important as contact dimensions shrink.
Integrating III-V devices on silicon
Silicon remains the required platform for the integration strategies discussed in this work, but combining it with III-V semiconductors is difficult. Differences in lattice constants can create defects during growth. Approaches under investigation include wafer bonding, transferring epitaxial layers and aspect ratio trapping, where growth in narrow trenches helps direct defects toward the sidewalls.
Nanowire growth offers another route: limiting the material’s cross-section can avoid some dislocation formation. Wires can be produced using vapor-liquid-solid growth or selective-area epitaxy, which uses a patterned mask to control where material grows. Template-assisted methods have also been explored. These techniques bring their own process and device-fabrication challenges, and high-performance transistors integrated on silicon remain a key requirement.
Beyond MOSFETs: tunnel FETs
Lowering supply voltage below the conventional MOSFET limit requires a different switching mechanism. Tunnel FETs use band-to-band tunneling: in the ON state, carriers tunnel between energy bands rather than entering the channel through thermal injection. This mechanism can produce a subthreshold swing below 60 mV/decade, creating the possibility of switching at lower voltage.
TFET performance depends on achieving high ON-current, low OFF-current and a steep switching slope together. III-V heterostructures can be engineered to reduce the effective tunneling barrier, and arsenide-antimonide combinations have demonstrated increased ON-current. However, their ON-to-OFF current ratio has been a limitation. Silicon-InAs heterojunction TFETs have shown high ON-to-OFF ratios, but further improvements are needed to meet all performance targets in one device. Gate quality, resistance, abrupt junctions and defects that cause trap-assisted tunneling all affect results.
Practical implications for device development
III-V transistors offer a potential path beyond conventional silicon scaling, but no single material or architecture resolves every constraint. Three-dimensional channels can improve electrostatic control; high-mobility III-V materials can support stronger current at lower voltage; and tunnel FETs may enable steeper switching. Each option also raises demanding questions about interfaces, resistance, fabrication and integration with silicon.
For engineers and technical decision-makers tracking the foundations of future computing hardware, the practical takeaway is that progress depends on coordinated development across materials and process integration—not simply smaller feature sizes. III-V MOSFETs and nanowire devices must demonstrate reliable gate control and low parasitic resistance on silicon, while TFETs must balance ON-current, OFF-current and switching slope. These remain necessary steps before the technologies can support future CMOS applications.