Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial automation solutions increasingly depend on the close integration of power electronics, sensing, motion control and connectivity. As manufacturers pursue more automated production and Industry 4.0 capabilities, these technologies help equipment perform essential tasks such as moving materials, inspecting products and monitoring operating conditions. Selecting components for each function—and ensuring they work together at the system level—is central to designing reliable automation equipment.

onsemi’s industrial portfolio spans power conversion and motor control as well as image sensing, LiDAR and connectivity. For OEMs and system designers, this range reflects a broader engineering challenge: automation systems need efficient power stages and accurate information about the physical environment.

Industrial automation solutions start with power conversion

Factory equipment, drives and other high-voltage applications require power conversion that balances efficiency with consistent operation across changing loads. The choice of topology and components affects system performance, thermal design and the overall power architecture. The source portfolio includes boost, fly-back and quasi-resonant approaches, implemented with monolithic ICs or discrete components, depending on application requirements.

Silicon carbide (SiC), silicon MOSFETs, IGBTs and related gate drivers are among the power devices used in industrial designs. SiC devices are also available as discrete components and modules, including silicon and SiC hybrid modules. These options give design teams flexibility to choose a configuration suited to their power stage and system constraints. Component selection still requires validation within the intended application; device characteristics alone do not determine system-level results.

Power conversion is relevant beyond factory machinery. The same design considerations apply to energy infrastructure, including solar inverters, energy storage systems and uninterruptible power supplies. In each case, designers must account for conversion efficiency, reliability, safety and the demands of the application. For mission-critical UPS designs, the source describes an infrastructure-class reliability approach, physical modeling and power modules that support key power-stage topologies.

Motor drives connect power electronics to motion

Motor drives are a fundamental part of industrial automation because they translate electrical power into controlled motion. Their energy use and operating demands make efficiency, accurate control and reliability important design objectives. A drive architecture typically brings together power switches, gate drivers and control circuitry, with the selection shaped by motor type, voltage and current requirements.

For higher-power drives, MOSFETs, IGBTs, gate drivers and power modules can form the building blocks of the power stage. Lower-voltage applications may use motor drivers for brushed, brushless or stepper motors. Galvanic isolation and operational amplifiers can also contribute to system safety and control. These elements matter in applications ranging from pumps and industrial drives to robotic joints, where motion performance is tied to the wider machine design.

Evaluating a drive as a complete system—not just as a collection of components—helps engineers consider power conversion, control, isolation and motor requirements together. That system view is especially useful as automation equipment is adapted for different loads and operating conditions.

Machine vision and LiDAR provide automation with sensing

Automated equipment needs reliable input about objects, movement and its surroundings. Machine vision cameras support inspection and imaging tasks, while LiDAR can be used for object detection, avoidance, movement and occupancy sensing. Choosing a sensing method begins with the task: what must be detected, and what information does the control system need to act?

Image sensor resolution, frame rate and shutter behavior are relevant considerations for machine vision. onsemi’s described portfolio ranges from VGA to 45 megapixels and includes global-shutter image sensors. These capabilities can support camera designs for inspection, where capturing clear images without motion blur is important. System designers also need to consider the surrounding camera components and how captured images will be used in the application.

For LiDAR, silicon photomultiplier (SiPM) arrays are one sensing option. The source highlights an SiPM fast mode intended to decrease sensing time, along with efficiency and dynamic-range characteristics that support operation in varied environments, including direct sunlight. As with any sensor selection, performance should be assessed against the actual use case, system design and operating environment.

Robotics brings power, sensing and connectivity together

Robotic systems combine several engineering disciplines. A robotic arm needs controlled movement; an autonomous mobile robot or automated guided vehicle also needs to perceive and navigate its environment. Machine vision, sensing and connectivity therefore complement motor control and power conversion rather than operating as isolated features.

For OEMs developing robots, the relevant design choices may include motor controllers, gate drivers, MOSFETs, image sensors, power supplies and communication technologies. The mix depends on the robot’s role and architecture. In collaborative and mobile systems alike, integrating these functions early can help teams address the interactions between motion, perception and system-level control.

Design implications for automation teams

A practical component strategy starts with the system requirements. Engineers and technical decision-makers can use questions such as these to guide evaluation:

  • What is the power-stage requirement? Define the application’s voltage, current and conversion needs before comparing discrete devices, integrated circuits or modules.
  • What motion must be controlled? Match the motor-control approach to the motor type and the equipment’s operating requirements.
  • What must the machine detect? Assess whether image sensing or LiDAR is appropriate, and establish the required image or detection information.
  • How will subsystems interact? Consider sensing, control, power and connectivity as parts of the complete machine architecture.
  • How will the design be validated? Use technical documentation and simulation resources where available, then validate operating parameters in the intended application.

These questions also help clarify where supplier support, development tools and technical documentation fit into the engineering process. They do not replace application testing, but can inform component choices and design work from the outset.

Building a foundation for smarter manufacturing

Industrial automation is not defined by a single device. It emerges from the coordination of efficient power conversion, dependable motor control and sensing suited to the task. SiC and other power technologies can serve different conversion needs, while machine vision and LiDAR help equipment gather information about products and surroundings. Robotics brings these capabilities together in systems that move, inspect and navigate.

For automation engineers, system integrators and plant decision-makers, the practical priority is to select technologies against the needs of the application and validate them as part of the complete design. A well-considered power and sensing architecture provides a foundation for equipment that can support more connected and automated manufacturing operations.

Access Official Technical PDF

About The Author