Access Official Technical PDF

Share Summary:LinkedInEmail

ATV960 drive systems provide an enclosed frequency-inverter solution for controlling asynchronous, synchronous, and selected special motors. For engineers and plant teams specifying a high-power drive, the system’s value lies not only in motor control but also in its ready-to-connect enclosure, selectable overload duty, and options for adapting the installation to the application.

The modular design is intended to simplify planning, installation, and commissioning while leaving room to tailor the equipment. Correct selection still depends on the motor, load profile, electrical supply, environmental conditions, and required safety and communication interfaces.

ATV960 drive systems and application fit

The ATV960 is designed for speed control across a broad range of motor types. Supported motor categories include asynchronous motors, permanent-magnet and other synchronous motors, torque motors, reluctance motors, and special motors such as those used in submersible pumps. The stated motor-control capability includes operation with and without encoder feedback, with control performance depending on the application and configuration.

That flexibility can be useful when a plant has different motor technologies across its processes or when a drive must be specified for a particular machine. It does not remove the need to verify motor compatibility and operating requirements during engineering.

Choose the overload model around the load

Drive sizing offers two duty models. The choice affects the available continuous power and the amount of short-term overload capacity, so it should reflect the driven equipment’s normal and transient demands.

  • Normal Duty (ND): Provides higher continuous power with 20% overload capability. Typical applications cited include compressors, centrifugal pumps, and fans.
  • Heavy Duty (HD): Provides reduced continuous power with 50% overload capability for 60 seconds. It is intended for applications with greater demands for overload capacity, starting torque, resistance to load impacts, or control performance, such as mixers, crushers, mills, and conveyor belts.

These categories help frame the selection, but the actual motor rating and output current must be checked against the relevant drive model and application conditions. For the listed 400 V range, the product data spans motor ratings from 110 kW ND / 90 kW HD to 800 kW ND / 630 kW HD.

Enclosure equipment and installation considerations

The standard system is based on a Spacial SF enclosure and includes frequency-inverter modules, semiconductor fuses, a main switch, a line reactor, mains and motor terminals, and a graphical operating panel in the enclosure door. The line reactor is specified to reduce harmonics, with a stated THDi range of 32–48%. A dv/dt filter choke is included from 355 kW for motor protection.

The standard enclosure protection rating is IP23. An IP54 design is available as a customization, along with options such as cable entry from the top or bottom, an enclosure plinth, lighting, heating, and different enclosure colors. The standard configuration uses bottom cable entry; enclosure dimensions and access requirements should be considered early in layout planning.

Control equipment is arranged on a separate panel with space for extensions and maintenance access. The power components use a separate cooling-air channel that exhausts about 90% of heat losses. Fans in the enclosure door cool the enclosure interior. For IP54 designs, the separate air supply for the power section is routed through the enclosure plinth.

Connectivity, multi-motor control, and safety

Embedded dual Ethernet is standard. It supports network redundancy and Rapid Spanning Tree Protocol (RSTP). For multi-motor applications, dynamic drive-to-drive communication supports master/slave groups and load sharing between motors. Fieldbus connections can be provided via Ethernet or Modbus, with additional communication cards available for other fieldbus systems.

Safety requirements should be addressed as part of the drive-system specification. The product information identifies functions including Safe Stop 1 (SS1), Safe Stop 2 (SS2), Safe Brake Control (SBC), Safe Operating Stop (SOS), Safe Maximum Speed (SMS), Safe Limited Speed (SLS), Safe Speed Monitor (SSM), and Safe Direction (SDI). The listed customization options also include Safe Torque Off (STO), with SIL 3 and stop category 0 or 1 stated. Confirm the functions available for the selected configuration and ensure they meet the machine’s safety design requirements.

Configuration and service options

Customization can address the electrical supply, site environment, motor interfaces, and maintenance needs. Available options include a braking unit, multipulse supply, increased short-circuit strength, circuit breaker, motor and bearing temperature monitoring, encoder interface modules, additional I/O, and a front display module. Other choices include remote monitoring, a front-door Ethernet port, local/remote key switch, customized labeling and documentation, and design for IT mains.

The system also includes service-oriented features. The described design allows power modules and fans to be exchanged, while QR-code access and a customer care application are intended to provide access to troubleshooting information. These features can inform maintenance planning, alongside the availability of spare parts and the site’s service procedures.

Making the specification decision

To specify an ATV960 system, start with the motor and load: confirm motor type, rated power, current, starting and transient demands, and whether Normal Duty or Heavy Duty is appropriate. Then check supply voltage, enclosure protection, cooling and cable-entry arrangements, network and multi-motor requirements, and the safety functions needed by the machine.

ATV960 drive systems bring power conversion, enclosure equipment, motor control, and configurable interfaces together in a single package. A disciplined review of duty rating, installation conditions, and required options helps teams select a configuration suited to the process and prepare for practical integration and maintenance.

Access Official Technical PDF

About The Author