Access Official Technical PDF

Share Summary:LinkedInEmail

Effective oxygen analyzer selection begins with the process, not the instrument model. Gas composition, oxygen concentration, temperature, pressure, dust loading and hazardous-area requirements all influence which measurement principle is suitable. Engineers must also decide whether to measure directly in the process or extract a sample for analysis. Understanding the strengths and limitations of each technology helps narrow the options and avoid choosing an analyzer that is poorly matched to operating conditions.

Start with the measurement duty

Define the required oxygen range and the purpose of the measurement. Combustion control in a boiler or furnace has different needs from trace oxygen monitoring in a manufacturing process, gas purity measurement or oxygen-deficiency prevention. The process application also determines whether the analyzer must tolerate hot gas, corrosive components, particulates or a flammable mixture.

Before comparing technologies, document:

  • The expected oxygen concentration and required measuring range.
  • Whether flammable or corrosive gases may be present.
  • Sample temperature, pressure and particulate content.
  • Whether an in-situ installation or a separate sampling system is appropriate.
  • Any explosion-protection requirements and required output signals.

These factors are interdependent. For example, an analyzer that can measure a particular concentration may still be unsuitable if its measurement principle is affected by another gas in the sample.

How the main oxygen analyzer technologies differ

Zirconia: direct measurement for many combustion applications

A zirconia analyzer uses a heated solid electrolyte that conducts oxygen ions. With different oxygen partial pressures on either side of the zirconia element, the system generates an electromotive force related to the oxygen concentration. Some configurations can be installed directly in a combustion process, avoiding a separate sample system and supporting a fast response.

Zirconia systems are used in applications such as boiler and furnace combustion control. The selection guide lists measuring ranges extending from low oxygen concentrations to as high as 100 vol% O2, depending on model and configuration. High-temperature service may require an adapter, so the actual gas temperature and installation arrangement need to be checked against the instrument specifications.

A key limitation is flammable gas in the sample: combustion of that gas at the sensor can cause measurement error. Zirconia should therefore not be selected without assessing sample composition. The guide notes a limited exception in its selection flow: when flammable gas content is 0.5% of the measuring range or less, the flowchart treats the answer as “no.”

Limiting current: for low oxygen concentrations

In a limiting-current system, oxygen flow to a heated zirconia element is restricted. Under the appropriate operating conditions, the resulting current reaches a region that is proportional to oxygen concentration. This makes the approach suitable for trace oxygen measurement.

The method also has practical constraints. Flammable gas can cause measurement error, and dust may clog the gas diffusion holes at the cathode. Where dust is present, a filter must be installed upstream. The guide describes span calibration using air, but the complete calibration and maintenance requirements should be confirmed for the selected instrument and application.

Paramagnetic: useful when sample composition rules out zirconia

Oxygen is attracted into a magnetic field. A paramagnetic analyzer uses this property to create a difference in auxiliary-gas flow between two streams; thermistors detect the flow difference and the analyzer converts it into an oxygen signal.

Because the detecting section has no sensor in direct contact with the sample gas, paramagnetic systems can be used for corrosive gases. They can also measure flammable gas mixtures that may be unsuitable for zirconia measurement. These analyzers require a sampling unit selected to suit the gas properties and application. Confirm the analyzer’s explosion-protection suitability separately, particularly where the gas or area classification imposes specific requirements.

Tunable diode laser: optical measurement for demanding process conditions

A tunable diode laser (TDL) analyzer measures the absorption of laser light at wavelengths associated with the target gas. The amount of light absorbed depends on gas concentration and the optical path through the measurement area. TDL systems can measure selected infrared-absorbing gases in challenging applications, including high-temperature, high-pressure, corrosive or particulate service.

Many applications use in-situ measurement, which can reduce the need for a separate sample system. However, installation requires a mounting flange, and the suitability of the optical arrangement and process-window purge must be evaluated for the specific service. TDL is not a universal replacement for other oxygen analyzers: confirm that the target gas and application are supported.

Match the technology to the installation

A practical selection process narrows the field in stages:

  1. Identify the application. Distinguish combustion control from trace measurement, gas purity monitoring or safety-related measurement.
  2. Check the sample. Assess flammable gases, corrosive components, dust and other conditions that can affect the measurement principle.
  3. Choose the measurement arrangement. Decide whether direct in-situ installation is suitable or whether a sampling system is needed.
  4. Verify operating limits. Check temperature, pressure, measuring range, response requirements and output options for the specific model.
  5. Resolve hazardous-area requirements. Confirm the analyzer and installation configuration meet the applicable explosion-protection needs. A general-purpose configuration may not be acceptable.

Application tables are useful for screening, but a recommendation is not a substitute for reviewing detailed specifications. Model configurations can differ in measuring range, installation type, signal options and protection. For example, some zirconia arrangements use a separate converter, while other versions integrate components. Averaging across multiple measurement points may also call for a different configuration from a single-point measurement.

Make selection a process-engineering decision

The most suitable oxygen analyzer is the one whose measurement principle, installation and operating limits fit the actual process. Zirconia can be effective for direct combustion measurement when flammable-gas interference is not a concern. Limiting-current systems address trace oxygen duties but require attention to particulates. Paramagnetic analyzers offer an alternative for certain flammable or corrosive mixtures, with a suitable sampling system. TDL analyzers provide optical measurement for demanding process conditions when the target gas and installation are compatible.

Use these distinctions to develop a shortlist, then verify the selected model against its detailed specifications and site requirements. When sample composition, hazardous-area classification or operating conditions are uncertain, obtain application-specific technical guidance before finalizing the analyzer and sampling design.

Access Official Technical PDF

About The Author