Access Official Technical PDF

Share Summary:LinkedInEmail

CANopen edge computing brings data processing closer to the machines, sensors, and actuators that generate it. Rather than sending every raw value directly to a cloud platform, a controller at the machine level can collect and process selected information locally, then forward relevant data to higher-level systems. For industrial automation teams, this approach connects established field-level communication with Internet of Things (IoT) applications.

The practical question is not simply whether a machine can connect to the cloud. It is how to collect useful, well-organized data from equipment, make it available where it is needed, and connect it to other processes without adding unnecessary complexity. CANopen can provide the communication link between devices inside a machine, while an edge controller can process that information and act as a gateway to systems using protocols such as MQTT or OPC UA.

Where CANopen fits in an edge architecture

CANopen is used to connect sensors, actuators, and controllers within machines and equipment. It can carry process data and status values, and it can support actions triggered by information exchanged between devices. Applications include special-purpose machines, battery management systems, commercial vehicles, elevators, and mobile machinery.

In an edge architecture, this field-level communication is one part of a broader data path. Devices communicate through CANopen; a controller reads and processes information locally; and selected data can then be passed to a cloud service, process-control system, or other higher-level application. This creates a way to connect machine-level data with IoT systems while retaining local processing close to the equipment.

One reason to consider CANopen within a machine is that many microcontrollers already include CAN interfaces. CANopen can therefore support communication between devices without requiring every field-level connection to use Ethernet-based technology. The source also identifies lower power and computing requirements as potential advantages for CANopen in this role, including in autonomous or battery-powered devices.

Why process data at the edge?

Cloud connectivity alone does not ensure that the data reaching an application is useful. Machine information may need to be collected, assessed, or combined before it is passed on. Edge computing places some of this work at the machine or device level, where data originates.

For example, a CANopen-capable controller can read process values from connected devices and perform local processing before forwarding selected information over MQTT or OPC UA. An edge controller can also provide a point for connecting machine data to higher-level systems. Depending on the application, those systems may include cloud services or process-control platforms used to record, analyze, and visualize equipment information.

This arrangement can help teams distinguish between raw device data and information relevant to monitoring or operational decisions. It also makes the machine-level communication path part of the IoT design rather than treating the cloud connection as the whole solution.

Supporting condition monitoring and maintenance

Local device data can contribute to condition monitoring and predictive maintenance approaches. Sensors and actuators can communicate status and process values through CANopen, while local intelligence can help make that information available for further use. The objective is to identify changes that may indicate a developing issue and support proactive maintenance, rather than relying only on a response after a failure.

The value depends on the application and the information available from the equipment. Relevant inputs might include device availability, power consumption, maintenance data, or process values. When devices can exchange this information, control logic may be able to respond to changing conditions. For instance, in an energy-management application, information about current peaks could inform the sequencing of large consumers rather than switching them on simultaneously. The specific control strategy remains dependent on the system design.

Embedding intelligence in sensors or actuators can also support self-diagnosis and communication with adjacent units. These devices can process their own values and environmental data, communicate through CANopen, and pass preprocessed information to an edge controller. This distributes data handling closer to the source.

Using CANopen in retrofit projects

Retrofitting existing equipment with intelligent assemblies is one way to extend machine-data capabilities without treating the entire installation as a new design. CANopen can be a practical option where devices need to exchange information inside a machine and the retrofit needs to remain manageable in cost, effort, and technological risk.

For machine builders and end users, a retrofit should be considered as part of the complete system. Teams need to determine which devices will provide data, how that data will be processed, and which higher-level applications need to receive it. A controller that combines CANopen communication with gateway functionality can help connect field devices to IoT systems, but the usefulness of the resulting data depends on selecting information relevant to the intended application.

This approach can also support new business opportunities for machine manufacturers and component suppliers. Intelligent assemblies may be incorporated into new machines or developed as additions to existing equipment, depending on the requirements of the installation.

Design considerations for automation teams

Before selecting an architecture, engineers and integrators should clarify the role of each layer:

  • Field devices: Identify which sensors and actuators need to exchange process values, status information, or commands.
  • Local processing: Decide what information should be processed at the device or machine level before it is passed on.
  • Gateway communication: Determine whether MQTT, OPC UA, or another supported connection is required for higher-level systems.
  • Application purpose: Define how the data will be used, such as for monitoring, visualization, or maintenance planning.

Keeping these responsibilities clear helps prevent an IoT project from becoming a cloud connection without a defined data strategy. It also gives teams a basis for evaluating whether intelligence belongs in an individual device, an edge controller, or both.

Conclusion

CANopen edge computing connects machine-level communication with local data processing and higher-level IoT applications. CANopen can link sensors and actuators inside equipment, while controllers can prepare selected information for cloud services or process-control systems. For industrial automation teams, the practical implication is to design the data path deliberately: start with the devices and values that matter, decide where processing should occur, and connect the resulting information to a clear operational purpose.

Access Official Technical PDF

About The Author