Soft magnetic materials are central to efficient power conversion, even though they receive less attention than semiconductor switches. They form the cores of inductors and transformers and are used in electrical machines, where they help channel magnetic flux. As wide bandgap (WBG) semiconductors enable faster switching and higher-speed motor control, magnetic cores face a demanding combination of requirements: low energy loss, useful magnetic performance and practical manufacturing.
Why soft magnetic materials matter in high-frequency design
Power electronics manage energy flow between sources, storage and the electrical grid, while motors and generators convert energy between electrical and mechanical forms. Both depend on magnetic components. A soft magnet has low coercivity, meaning its magnetization can be changed with a relatively small opposing field. Its permeability helps concentrate magnetic flux in a core, supporting energy storage and transfer in inductive devices.
WBG devices, including silicon carbide and gallium nitride semiconductors, can switch faster than conventional silicon devices. Higher switching frequencies can reduce the inductance and capacitance required in a circuit, making smaller passive components possible. They also support higher rotational speeds in electrical machines. But the magnetic materials used in those components must operate efficiently under the resulting conditions. No currently available soft magnetic material fully unlocks the potential of WBG-based devices.
Two losses are especially important. Hysteresis loss is associated with repeatedly cycling a material’s magnetization; the area enclosed by its magnetization curve represents energy dissipated per cycle. Eddy currents are circulating currents induced by a changing magnetic field. Their losses become increasingly important as frequency rises. Material resistivity, core geometry and lamination thickness all affect the ability to limit them.
Comparing established soft magnetic materials
Silicon steel: economical, but challenged by frequency
Silicon steel remains a widely used soft magnetic material, particularly in large transformers and electrical machines. It offers high saturation magnetization and relatively low cost. However, its electrical resistance is low, which makes it susceptible to eddy-current losses at higher frequencies. Thin laminations help restrict those currents, but silicon steel is not an ideal answer for every high-frequency application.
Ferrites: high resistivity with lower saturation
Ferrites are ceramic magnetic materials with very high electrical resistivity. That characteristic helps suppress eddy currents, making ferrites useful at high frequencies, including applications into the megahertz range. Their main trade-off is comparatively low saturation magnetization—almost a factor of four below silicon steel, according to the review. This limits the power density of devices designed around ferrite cores. Ferrites are therefore particularly relevant where low losses matter and the required magnetic flux is modest.
Amorphous and nanocrystalline alloys: low losses, demanding fabrication
Amorphous alloys have a disordered structure, while nanocrystalline alloys contain very small crystallites within an amorphous matrix. Their structure and thin ribbon form help keep eddy-current losses low. These materials can also offer low coercivity and useful saturation magnetization, making them candidates for high-frequency power electronics and electrical machines.
The challenge is manufacturing. The ribbons are thin and brittle, and the alloys are mechanically hard. Cutting, stacking or winding them into a finished core can be difficult; machining can add cost and affect the material. Nanocrystalline alloys, in particular, may need to be annealed in their final core geometry and handled carefully. Their electrical performance must therefore be weighed against fabrication requirements.
Soft magnetic composites: shape flexibility and distributed gaps
Soft magnetic composites (SMCs), also called powder cores, are made from magnetic particles coated or mixed with an insulating material and consolidated under pressure. Insulation between particles raises the material’s resistivity and reduces eddy-current losses. The resulting distributed air gaps can also support a more gradual approach to magnetic saturation.
Because composites are isotropic, they can be useful in rotating electrical machines, where magnetic properties in different directions can be an advantage. They can also be formed into complex shapes without the same need for machining as ribbon-based materials. Their performance is comparatively modest, however, and mechanical stresses in the particles can increase hysteresis loss.
Implications for power electronics and electrical machines
In high-frequency power electronics, core losses can erode the gains made by faster semiconductor switches. Material selection should account for the operating frequency and magnetic flux as well as the component’s required size and manufacturability. A material that limits eddy currents may still have a saturation limit or fabrication constraint that affects the design.
Electrical machines face a related challenge. Core losses in the stator and rotor arise from hysteresis and eddy currents, and they depend on the magnetic material, flux density and rate of change of flux. As motor speeds increase, these losses become more significant. Reducing them can support more efficient operation and reduce heat that must be managed inside a machine. However, the benefits of a low-loss core must be considered alongside the practical difficulty of producing the required geometry.
Research directions and practical takeaways
Research is focused both on improving existing material families and on developing new approaches. Work on ferrites includes grain-boundary engineering and synthesis methods suited to integrated manufacturing. Amorphous and nanocrystalline alloys continue to be refined, including efforts to improve magnetic performance and make larger parts easier to fabricate. Composite research is also moving toward nanoparticle-based materials, which may offer new ways to manage defects and losses; these approaches remain an area of development.
Advanced characterization is important across these efforts. Understanding how a material’s microstructure affects magnetization reversal can help researchers identify sources of loss and design improved soft magnets. For engineering teams, the practical lesson is to assess magnetic-core materials against the complete application rather than frequency alone. Relevant considerations include:
- Core loss: How hysteresis and eddy currents change under the intended operating conditions.
- Magnetic capacity: Whether saturation magnetization supports the required power density and flux.
- Manufacturing: Whether the material can be cut, stacked, wound or shaped into the required component.
- Operating environment: Whether the material’s behavior is suitable for the application’s temperature and frequency range.
As electrification expands and WBG devices raise the performance expectations for power converters and motors, soft magnetic materials become an increasingly important part of system design. Ferrites, advanced alloys and composites each offer different combinations of loss control, magnetic capacity and manufacturing flexibility. Matching those trade-offs to the application is essential to realizing practical improvements in efficiency, size and power density.