Access Official Technical PDF

Share Summary:LinkedInEmail

Quality management in manufacturing depends on more than inspection at the end of a production line. It also requires realistic order acceptance, processes capable of meeting specifications, sufficient assurance resources and governance that enables concerns to be raised and addressed. Mitsubishi Materials Corporation’s 2018 integrated report described quality issues across several subsidiaries, providing a case study in how weaknesses across these areas can combine to undermine product conformance.

The company reported that products from five subsidiaries had been shipped in conditions that deviated from customer standards or internal specifications. The misconduct included rewriting inspection-record data. A separate issue concerned quality-control methods for copper slag aggregate produced at the Naoshima Smelter & Refinery; its JIS certification was revoked in June 2018. The company said it implemented recurrence-prevention measures at the affected subsidiaries and site and analyzed the underlying causes and organizational context.

Quality management in manufacturing starts before production

A key lesson from the report is that quality risks can be created well before a product reaches inspection. The company identified inadequate influence over product development and order acceptance as a contributing factor. It also noted that orders had been accepted, and mass production undertaken, for specifications that exceeded manufacturing capability.

For industrial organizations, this connects commercial decisions directly to process capability. A delivery commitment or customer requirement cannot be treated as separate from the plant’s ability to produce and verify the specified product. When capability is uncertain, the risk must be visible during quotation, engineering review and order acceptance—not discovered only after production is underway.

The report also identified an attitude that placed too much emphasis on securing orders and meeting delivery dates. Under those conditions, production priorities can conflict with the time and resources needed to maintain conformance. The practical implication is that schedule and sales pressures should not override specification requirements or the authority of quality functions.

Why inspection alone cannot compensate for weak systems

Mitsubishi Materials identified shortcomings in its quality-assurance framework, pressure on quality assurance departments from other functions, and limited awareness of compliance with specifications. It also pointed to insufficient business resources, including inspectors and inspection equipment. These findings illustrate why adding a final inspection step is not, by itself, a complete quality strategy.

Inspection can detect some deviations, but it depends on adequate capacity, appropriate equipment and reliable records. If inspectors are stretched, equipment is insufficient, or the assurance team faces pressure from departments focused on output or delivery, the control system may fail to identify or escalate problems. Accurate inspection data are also essential: altering records damages the evidence needed to establish whether requirements were met.

The report further cited overconfidence in the belief that quality control was already being achieved, low sensitivity to quality risks and audit procedures that had become a formality. For plant managers and quality leaders, these issues underline the importance of testing whether controls operate effectively in practice. An audit that confirms the existence of a procedure without checking how people use it may provide limited protection.

Governance gaps can allow quality issues to persist

The company’s analysis extended beyond individual sites to group governance. It identified harmful effects from vertically segmented organizations, insufficient control over subsidiaries and inadequate sharing of governance-related information. It also described gaps in compliance knowledge, organizational responsibility and the ability to discover misconduct, take action and report issues promptly.

These points matter in multi-site manufacturers, where local operations may have different processes, management structures and customer requirements. Group-level oversight needs channels through which quality concerns can travel across organizational boundaries. Without clear communication and escalation, an issue identified at one location may not prompt timely attention elsewhere.

Resource allocation was another governance concern. The report cited insufficient process capability or inspection and assurance capacity, as well as unsuitable allocation of resources when earnings priorities led to necessary capital investment being postponed. Quality assurance therefore has a direct connection to operational planning: investment decisions, staffing and production capacity can affect whether specifications are consistently achievable.

Building accountability into quality governance

In response, Mitsubishi Materials formulated group-wide measures to restructure its quality-control governance and enhance its broader governance framework. The report stated that, from April 1, 2018, the company established a Group Governance Enhancement and Promotion Division to implement and check key prevention and enhancement measures. It also created a Governance Deliberative Council to consider business divisions’ governance policies and plans, and a Governance Division with administrative and support responsibilities. The latter oversaw functions including safety and environment, CSR, quality management and internal audit.

These arrangements were intended to strengthen coordination and oversight; the report does not establish that organizational structures alone resolve quality problems. Their practical value depends on whether responsibilities are clear, information is shared, concerns can be raised without inappropriate pressure, and corrective actions are followed through.

Manufacturers can use the case to review several connected controls:

  • Order acceptance: Confirm that proposed specifications can be met by the actual process and available resources.
  • Quality authority: Ensure assurance teams can report deviations and risks without being subordinated to delivery or output pressures.
  • Inspection readiness: Provide the inspectors, equipment and reliable records needed to verify conformance.
  • Audit effectiveness: Check whether controls are followed and work as intended, rather than only confirming that procedures exist.
  • Escalation and oversight: Establish ways to share concerns across sites and subsidiaries and to act on them in a timely manner.

Practical implications for industrial operations

The Mitsubishi Materials case shows how nonconforming shipments may reflect interconnected weaknesses in commercial decisions, manufacturing capability, inspection, compliance and governance. Treating quality as the responsibility of a single department can obscure these dependencies. Effective control requires alignment between what an organization promises customers, what its processes can produce, and what its assurance systems can verify.

For engineers, integrators and operations leaders, the practical priority is to make conformance a condition of planning and execution—not merely a final check. Clear accountability, adequate resources, trustworthy records and meaningful escalation routes help organizations identify risk earlier and respond before deviations become a wider trust issue.

Access Official Technical PDF

About The Author