A Kanban production system helps control shop-floor replenishment by making production needs visible and linking work to actual consumption. For industrial automation engineers, system integrators and operations leaders, the method is not simply a set of cards: it is a practical way to coordinate material flow, priorities and production information. A case study at a small metalworking company illustrates how basic visual controls and workplace organization can address shortages, excess work-in-process and avoidable downtime.
How Kanban supports production control
Kanban is a pull-based production control method associated with just-in-time (JIT) manufacturing and the broader principles of lean production. Rather than releasing work solely according to a forecast or pushing items through each process, a downstream operation signals that it needs parts from an upstream process. A card or another visual signal communicates what to replenish and, depending on the system design, the quantity and timing.
This signal helps coordinate production between connected processes. A downstream operation takes only the items it needs, when it needs them; the upstream process replenishes what has been used. In this way, Kanban can serve as an operational layer of production planning and control, communicating shop-floor priorities without requiring every instruction to be managed centrally by the planning department.
Kanban works best within a disciplined JIT environment. Its effectiveness depends on dependable material identification, agreed replenishment rules and consistent use of the signals. It is designed to respond to relatively small fluctuations in demand; it has more limited flexibility when production volume changes substantially.
Why the welding area needed better controls
The case study focused on the MAG welding department of a small metalworking manufacturer supplying the automotive market. The area had seven welding machines and 14 employees. Its output also fed surface-treatment operations, making reliable movement of welded parts important to the next stage of production.
Before the improvement, the department faced a combination of material and information problems: shortages of parts at the machines, uncertainty about actual stock quantities, poor organization and scrap associated with extended storage. A 15-day observation period found machine stoppages caused by missing parts on 11 days. Surface-treatment processes waited for welded components on 10 days. In one particularly difficult instance, five machines and 10 employees were idle because stored parts had been scrapped. The study also reported that approximately 10% of the parts held for welding were scrapped after long storage.
These issues show why inventory alone does not guarantee availability. If stock records are unreliable, parts are mixed together or storage is poorly organized, operators may not be able to identify and access the material production requires.
Implementing a Kanban system on the shop floor
The implementation combined visual replenishment with practical changes to storage and work organization. The team first reviewed the parts that passed through the welding area and their monthly turnover. This provided a basis for checking stock levels and setting appropriate controls.
Next, the layout was reorganized to create space for a designated Kanban area. Smaller components were stored on a purpose-built shelf, while larger parts were placed in containers arranged consistently. An inventory count then established actual quantities. The count exposed differences between physical stock and the quantities shown on identification cards, along with mixed parts and inventory that the production leader had not known was present. Parts were identified to improve the reliability of shop-floor information.
Employees received training on the purpose and operation of the system, and one employee was assigned responsibility for tracking parts entering and leaving the Kanban storage area. Stock priorities and safety levels were set using historical part withdrawals. This sequence matters: visual controls are only useful when the inventory they represent is identified, the storage locations are clear and people understand how to maintain the system.
Visual signals and replenishment rules
A Kanban board can show replenishment status at a glance. In a common arrangement, colored zones indicate changing urgency as cards accumulate: green for routine replenishment, yellow for increased attention and red for a critical level. Operators or material handlers move the cards according to the agreed rules as containers are consumed. The colors do not replace the process rules; they make the status easier to interpret and act on.
The underlying operating principles are straightforward:
- The downstream process takes only the required items, in the required quantity and at the required time.
- The upstream process replenishes only what the downstream process has consumed or requested.
- Parts supplied to the supermarket should meet the required quality conditions.
- The number of Kanban signals should be kept to the minimum needed to control replenishment.
In the case study, the Kanban area and the assigned responsibility helped make part availability and movement more visible. The approach also distributed production information beyond the planning and control department, involving employees closer to the work.
Reported results and practical considerations
During a second 15-day observation period after implementation, the company reported a 35% reduction in the stock of parts awaiting welding. No parts were scrapped because of extended storage. On four days, one machine and two employees were idle; the surface-treatment process did not stop because of missing welded parts during that period.
The study also reported an 82.7% reduction in manufacturing expenses in the welding area following implementation. This is a result from the specific company and assessment described in the case, not a guaranteed outcome for other facilities. The observed changes were accompanied by improved organization and more reliable inventory information.
For plants considering Kanban, the case points to several implementation priorities: understand part demand and movement, verify physical inventory, define storage locations, establish clear replenishment ownership, and train everyone who handles the signals. A Kanban system also requires routine discipline. If cards, containers or inventory records are not kept current, visual signals can quickly become misleading.
Conclusion
A Kanban production system can strengthen production control by connecting replenishment to consumption and making priorities visible where work happens. The metalworking case demonstrates that the method involves more than introducing cards: inventory accuracy, organized storage, clear responsibilities and employee engagement are essential parts of implementation. For operations teams, the practical goal is a more dependable flow of parts, with less avoidable work-in-process and fewer interruptions between connected processes.