Access Official Technical PDF

Share Summary:LinkedInEmail

Assessing bamboo wall thermal performance requires more than identifying a material as renewable or observing its surface temperature. For building designers and technical decision-makers, the key question is how heat moves through a complete wall assembly under controlled conditions. A study of bamboo cultivated in Tuscany, Italy, illustrates an approach based on in-place thermal transmittance measurements, temperature monitoring and thermal imaging.

The work focused on bamboo used as an infill wall rather than on its structural capacity. It compared two constructions: one made from longitudinally split bamboo culms, and another using split culms with a sustainable mortar coating on the interior face. The investigation offers a useful example of how natural building materials can be evaluated through measured thermal behaviour rather than assumptions about their performance.

Why measure bamboo as a wall assembly?

Bamboo’s properties vary with factors such as density and position within the culm. Its thermal conductivity is not necessarily uniform across the material, and the construction details that join individual pieces also influence the behaviour of a finished wall. Consequently, data about raw bamboo alone cannot describe how an assembled infill performs.

The researchers selected Phyllostachys viridiglaucescens grown at three locations in Tuscany. Using locally cultivated material was consistent with the study’s sustainability focus. Culms were treated with a borax and boric acid solution, then dried. The central portions were used because the basal and apical sections differ in dimensions and were less suitable for the chosen construction method.

Each culm was split along its length. The nodal diaphragms were removed so the half-culms could be fitted together. This approach retained the bamboo’s natural appearance and was selected with the potential for disassembly and material recovery in mind.

How the thermal transmittance test worked

Thermal resistance measurements followed the procedures cited in UNI EN 1934:2000 and ISO 9869:1994. For the test, a metering chamber provided a controlled hot-side environment while the opposite face of the sample was exposed to a room with a controlled temperature. The chamber’s internal temperature was brought to about 50 °C, with a temperature difference of more than 20 °C maintained between the hot space and the surrounding environment.

The test wall was mounted at the front of the chamber. Seven bamboo culms, split to create 14 half-culms, formed a sample approximately 112 centimetres wide and 40 centimetres high. Its average thickness was about six centimetres. Insulation at the perimeter was used to limit heat loss around the specimen, helping ensure that the monitored heat flow passed through the test wall rather than escaping at its edges.

Temperature probes measured conditions at the wall surfaces, while a heat-flow plate recorded heat flux through the sample. A data logger captured measurements at 10-minute intervals. Before recording the main test data, the chamber and wall were allowed a 48-hour stabilisation period. This matters because a stable temperature gradient supports a more meaningful comparison of heat flow over time.

Thermal imaging adds context to sensor readings

Contact sensors provide point measurements, but they do not show the temperature pattern across an entire surface. The team therefore used a thermal imaging camera to inspect the test walls and identify areas of potential concern, including possible thermal irregularities. Thermographic images were also used to help assess sensor placement.

For engineers and building evaluators, the two methods serve different purposes. Heat-flux monitoring is used to calculate thermal resistance or transmittance under the test conditions. Thermal imaging provides a visual view of surface-temperature variation. Used together, they can help distinguish overall wall behaviour from local effects that may warrant closer inspection.

What the comparison can—and cannot—establish

The study design makes it possible to compare the two bamboo constructions under similar experimental conditions. However, a wall’s measured thermal behaviour should be interpreted in relation to its dimensions, assembly, boundary conditions and test procedure. The findings should not automatically be treated as a performance rating for every bamboo species, wall design or building environment.

The available results describe the measurement approach and the comparison, but do not provide numerical thermal transmittance values for the two walls. It is therefore not possible to quantify their difference from the reported information. The test remains a relevant example of how to assess a non-standard material assembly systematically, while also highlighting the importance of reporting measured values and test conditions when results are used for design decisions.

For project teams considering bamboo infill, practical evaluation should address the assembled wall—not just the culm—as well as the quality of joints, edge details and any added coating. Measurement under controlled conditions can help build evidence for material selection, while thermal imaging can support inspection of temperature patterns during testing.

Conclusion

The Tuscany study demonstrates a structured way to investigate bamboo infill walls: use locally sourced material, define the assembly, control the temperature difference, monitor heat flux and surface temperatures, and inspect the wall with thermal imaging. These steps can help technical teams evaluate natural building materials with greater confidence. For decisions about bamboo wall thermal performance, the central lesson is to rely on measurements of the complete construction and to interpret results within the limits of the tested assembly and conditions.

Access Official Technical PDF

About The Author