Access Official Technical PDF

Share Summary:LinkedInEmail

Effective machine safety systems combine devices that detect hazardous conditions with logic that evaluates safety signals and outputs that bring equipment to a safe state. For automation engineers and plant teams, selecting these components is a system-level task: the devices must suit the hazard, machine operation, environment and required risk reduction strategy.

A practical design starts by considering the complete safety function rather than choosing products in isolation. Emergency stops, guard switches and presence-sensing devices provide inputs; relays or safety controllers process those signals; and safety-rated drive functions can stop motion. The performance of the total system must be evaluated, not inferred from the rating of any single component.

Machine safety systems: inputs, logic and outputs

Safety architecture is commonly organized into three functional layers:

  • Inputs detect a request to stop, an open guard, a person entering a protected area or another safety-related condition.
  • Logic evaluates input states and determines whether to maintain, interrupt or restore safety outputs.
  • Outputs act on machinery, for example by switching safety circuits or invoking a drive’s Safe Torque Off (STO) function.

Designers select devices for the required risk reduction strategy and then verify the performance of the assembled system. The guide notes that the safety category and performance level (PL) of the complete input, logic and output subsystems need evaluation in accordance with ISO 13849-1. A component’s individual classification does not, by itself, establish the performance of the whole machine safety function.

Choosing safety inputs for the hazard

Emergency stops and enabling devices

Emergency stop pushbuttons and rope-pull switches provide manually operated ways to initiate a stop. Rope-pull devices can be used along extended areas of equipment, while pushbuttons are installed at accessible positions. Selection involves considering the operating arrangement, contact configuration, enclosure protection and the environment where the device will be mounted.

Enabling switches serve a different purpose. A three-position enabling device can support controlled work such as teaching or maintenance in hazardous areas when incorporated into an appropriate safety circuit. It is not a substitute for a risk assessment or for the safety logic and procedures required by the application.

Guard monitoring and locking

Safety limit switches and door switches monitor whether a movable guard is in position. Non-contact switches offer another approach to guard monitoring, while coded or RFID devices can provide greater resistance to tampering, depending on the model. Guard-locking switches add a locking function where a guard must remain closed until the relevant conditions for access are met.

Application details matter. A guard protecting against an inertial hazard may need to remain locked while motion continues. Other installations may need a means of releasing the lock from inside an enclosed hazardous area. Mounting hardware, door construction, wiring, contact arrangements and environmental exposure should all be considered alongside the switch itself.

Presence sensing around openings

Safety light curtains and multi-beam devices protect access points by detecting an interruption in their sensing field. They can be used at frequently accessed openings or around larger access areas, with the protective height and resolution chosen for the application. Muting functions, where required, must be integrated into a suitable safety design rather than treated as a general bypass.

Safety laser scanners provide configurable presence sensing over an area, while single-beam safety sensors can address hazardous gaps. For washdown, cutting-oil or other demanding conditions, environmental protection and materials become key selection criteria. The product lineup includes light curtains and non-contact switches with specified environmental protection options, as well as models intended for food-production environments.

Matching safety logic to machine complexity

Safety relays can support relatively direct safety circuits, while flexible safety units and programmable safety controllers provide options for more involved functions. For example, a machine may require separate zones to stop independently or may need logic that coordinates several guards and presence-sensing devices. A logical AND function can be used in some architectures to implement partial or global stopping.

Programmable controllers can consolidate safety logic and provide tools for configuration, validation and debugging. Integrated safety control can also sit alongside standard machine automation, including distributed safety I/O. The appropriate architecture depends on the number and type of devices, machine zones, required safety functions and the wider control system—not simply the number of available inputs.

Networks such as CIP Safety on EtherNet/IP, Safety over EtherCAT (FSoE) and DeviceNet Safety are among the communication approaches represented in the product range. Networked safety I/O can help distribute connections across a machine, but the safety application still requires correct configuration, validation and monitoring.

Safety outputs and stopping motion

Safety relays and controller outputs can interrupt safety-related circuits. Where motion is involved, drives with safety functionality can provide functions such as STO. Some servo systems in the lineup support additional functions, including Safe Stop 1 (SS1), Safe Stop 2 (SS2), Safe Operating Stop (SOS), Safely-Limited Speed (SLS), Safely-Limited Position (SLP), Safe Direction (SDI) and Safe Brake Control (SBC).

These functions are not interchangeable; each addresses a particular safety task. Engineers should match the drive function to the machine’s intended behavior and ensure that it is implemented through the complete safety control architecture. A general-purpose inverter or servo system offering STO does not, on that basis alone, determine how the rest of the machine responds.

Practical design considerations

When developing or reviewing a machine safety system, consider the following:

  • Identify hazards, access points and the safety functions needed for each operating mode.
  • Choose input devices suited to the opening, guard, working method and environmental conditions.
  • Determine whether the logic should support local, zoned or global stopping and whether a relay or programmable controller is appropriate.
  • Match output devices and drive safety functions to the required response of the machine.
  • Plan wiring, network connections, diagnostics, maintenance access and any required escape or release provisions.
  • Evaluate and validate the performance of the complete system, including its input, logic and output subsystems.

Conclusion

Reliable machine safety comes from coordinating detection, safety logic and machine response around the hazards and operating needs of the equipment. A well-chosen combination of guard switches, presence sensors, relays or controllers, and safety-capable drives can form the basis of that design. The practical priority is to assess and validate the complete safety function—not to rely on a component specification as proof that the overall machine meets its risk reduction requirements.

Access Official Technical PDF

About The Author