Remote plasma sources support a range of semiconductor manufacturing tasks, from removing deposition residues inside process chambers to generating reactive species for on-wafer treatments. Choosing an appropriate system depends on the application’s chemistry, operating conditions, process requirements and equipment integration needs. Three approaches described here—the Paragon® and R*evolution® remote plasma sources and a high-power microwave plasma system—illustrate how different source designs address chamber cleaning and on-wafer processes.
For engineers and equipment teams, the practical distinction is where reactive species are used and what the process needs from the source. Chamber cleaning uses radicals to react with accumulated films, while on-wafer applications may call for oxygen-based photoresist removal, surface cleaning or conditioning, and deposition-related processes. Flow capability, pressure range, plasma chemistry and control features are therefore important considerations.
Remote plasma sources for chamber cleaning
The Paragon Remote Plasma Source is designed as a reactive gas generator for deposition chamber cleaning. Its stated operating range supports NF3 flows up to 8 slm and pressures up to 10 Torr. The system uses patented Low-Field Toroidal plasma technology, which couples RF power into the plasma while maintaining low electric fields.
In chamber cleaning, the source generates atomic fluorine radicals that react chemically with excess film deposits. The aim is to remove deposits from the chamber without harming the process chamber or its components. This makes the source relevant to deposition equipment where films build up during processing and must be removed to maintain chamber readiness.
The Paragon source incorporates a large-radius torus and a patented gas injector. Its plasma block has a PEO coating, a design intended to support ultra-clean performance, low erosion rates, extended block life and plasma uniformity. The manufacturer reports a dissociation rate greater than 98%. These design and performance details are relevant when assessing how a cleaning source fits a particular process, but should be considered alongside the application’s gas, chamber and operating requirements.
Although the primary application is chamber cleaning, the source can also operate with other gas species, including oxygen, hydrogen, nitrogen and gas mixtures. That flexibility is pertinent as deposition processes introduce new materials and advanced technology nodes call for additional process chemistries.
On-wafer processing with oxygen and other reactive species
R*evolution remote plasma source
The R*evolution Remote Plasma Source is based on Low-Field Toroidal plasma technology and uses an actively cooled, fused-quartz plasma chamber. It is designed to operate across a broad range of gas flows and pressures. The quartz chamber supports oxygen-radical dissociation, and the source is identified as a reference for plasma-based photoresist removal applications in semiconductor equipment.
Product development has focused on manufacturing productivity, including higher flows, true power control and wafer-to-wafer repeatability. True power control is also intended to help with equipment chamber matching. The compact, self-contained unit is designed for integration into process equipment. EtherCAT® communication is available for data reporting and monitoring, supporting integration with advanced semiconductor manufacturing controls.
High-power microwave plasma system
A high-power microwave plasma system offers a different configuration for on-wafer applications. Operating at 2450 MHz with power up to 6 kW, the system includes a generator with isolator, an auto-tuning system comprising a Precision Power™ Detector and SmartMatch® unit, and a microwave plasma source.
The system is specified to deliver radical concentrations in the 10-12 to 10-13 range, with low electron temperatures intended to support high dissociation and low recombination rates. It can ignite in various process gases over a wide operating range within seconds. Listed application areas include photoresist removal after HDIIS implant, advanced surface cleaning and conditioning, and advanced deposition.
For repeatability, the system uses closed-loop power control. The source material specifies less than 1% of full-scale accuracy variation, with the stated goal of supporting manufacturing consistency from wafer to wafer and equipment to equipment. This control characteristic may matter where matching and process repeatability are key equipment requirements.
Match source capabilities to process requirements
Comparing plasma systems starts with the process task, rather than treating all plasma sources as interchangeable. A useful evaluation considers:
- Application: Determine whether the requirement is chamber cleaning, on-wafer stripping or cleaning, selective pre-cleaning, or deposition-related oxidation or nitridation.
- Chemistry: Confirm that the source supports the gases or mixtures required by the process. The described systems list different compatible chemistries, including NF3, oxygen, nitrogen, hydrogen, water and ammonia.
- Operating envelope: Review the stated flow, pressure, power and frequency information against equipment and process needs. The Paragon specifications include NF3 flow and pressure limits; the microwave system specifies operating frequency and maximum power.
- Control and integration: Consider available power control, monitoring and communications. EtherCAT is available with the Paragon and R*evolution sources, while the microwave system uses closed-loop power control.
These factors help connect source selection with the wider equipment design. They also clarify which characteristics—such as gas flexibility, chamber matching, data reporting or cleaning chemistry—need to be validated for a specific process configuration.
Practical implications for semiconductor equipment teams
Remote plasma sources provide a way to generate reactive species for both deposition chamber maintenance and wafer-level processing, but the relevant design priorities differ by use case. The Paragon source is oriented toward chamber cleaning with atomic fluorine generation and support for multiple gas species. The R*evolution source emphasizes oxygen-radical applications, including photoresist removal, alongside integration and monitoring features. The microwave system combines high-power microwave generation with auto-tuning and closed-loop power control for several on-wafer applications.
For process engineers, integrators and operations leaders, the practical next step is to map process chemistry and equipment requirements to each source’s operating range and control options. That comparison provides a more grounded basis for selecting plasma equipment, planning integration and assessing how a source fits manufacturing repeatability and chamber maintenance needs.