Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial control systems often need to perform two demanding jobs at once: respond predictably to fast-changing electrical signals and exchange data with networks, sensors and supervisory equipment. The TMS320F2838x C2000 family addresses this combination with a real-time control microcontroller architecture that pairs C28x processing resources with a separate connectivity manager. For automation engineers, the key design opportunity is to allocate time-critical control and communications to different processing domains while using integrated peripherals to connect both to the physical system.

How the F2838x processing architecture divides workloads

The F2838x family is built around one or two 32-bit C28x CPUs, depending on the device. Each enabled C28x CPU operates at up to 200 MHz and includes floating-point support, a trigonometric math unit (TMU), and CRC-related instructions. These resources are intended to accelerate common calculations in real-time control algorithms. The dual-core variants can dedicate processing resources to separate control tasks, while single-core variants provide a different balance of compute resources and integration.

Control law accelerators (CLAs) add another processing path. They can execute code independently of the C28x CPUs and include single-precision floating-point capability. This allows a design to partition suitable control calculations rather than requiring every task to run on a main CPU. Memory also varies by device configuration: dual-core models provide dedicated C28x flash and RAM alongside shared global RAM, while single-core models have a different C28x memory complement. Engineers should check the specific device comparison and memory map when planning software placement and inter-processor communication.

A separate connectivity manager for communications

The connectivity manager (CM) is based on a 125-MHz Arm Cortex-M4 processor and has its own flash and RAM. Because it can manage supported interfaces independently, it gives system architects a way to handle communications without assigning every interface task to the C28x control cores. This separation can help preserve C28x processing capacity for deterministic control work; it does not remove the need to design, schedule and verify the complete system.

The CM includes a 10/100 Ethernet MAC with 1588 MII/RMII support, an AES accelerator, a general CRC module and a 32-channel micro-DMA controller. Its associated interface resources include CM UART, I2C and SSI. Shared communications features include USB 2.0, CAN and CAN FD, with availability and allocation depending on the device. The family also introduces an EtherCAT slave controller, which can be assigned to the CM or CPU1 on applicable devices.

On the C28x side, communications options include four SPI ports, four SCI/UART interfaces, two I2C interfaces, PMBus, two McBSP ports, and fast serial interface (FSI) channels. FSI supports robust communication across isolation boundaries; the device description specifies communication up to 200 Mbps. These interfaces give designers choices for linking control boards, drives and other system components, subject to pin multiplexing and device-level availability.

Integrated sensing and power-stage control

For applications such as inverters and motor drives, the value of a real-time control microcontroller depends not only on CPU speed but also on how closely sensing and actuation are integrated with processing. F2838x devices provide four ADC modules, each configurable for 16-bit operation at up to 1.1 MSPS or 12-bit operation at up to 3.5 MSPS. The family also includes windowed comparators with DAC references and three buffered 12-bit DAC outputs.

On the actuation side, the devices offer 32 PWM channels. Sixteen channels across eight PWM modules support high-resolution operation, and dead-band functionality is available for standard and high-resolution modes. Additional control resources include seven eCAP modules, three eQEP modules and eight sigma-delta filter input channels, each with two independent filters. Together, these peripherals can support the acquisition, processing and output stages used in power conversion and motion-control designs.

Configurable logic, diagnostics and safety considerations

Configurable logic blocks (CLBs) let designers add custom logic and extend existing peripheral functions. The family comparison shows CLB availability on selected models, so it should not be assumed across every F2838x part. Device variants also differ in core count, memory, peripheral allocation and package options. Confirming these details early can prevent a mismatch between control requirements, communication topology and the selected part.

Safety-related features include hardware built-in self-test, diagnostic resources such as ERAD and background CRC, and device documentation intended to support functional-safety system design. The family information states that system functions meet ASIL D and SIL 3 requirements, while hardware functions meet ASIL B and SIL 2 requirements. It also lists TÜV SÜD certification to ISO 26262 ASIL B and IEC 61508 SIL 2. These statements are not a substitute for system-level safety engineering or a review of the applicable documentation for the exact device and application.

Where the family fits in industrial automation

The listed applications include industrial motor drives, HVAC commercial motor control, servo drives, CNC systems, automated sorting equipment, central and string inverters, industrial AC-to-DC conversion, and three-phase UPS systems. The same integration can also be relevant to onboard and wireless chargers, linear motor segment controllers, and short- or medium-range radar. The common design challenge is coordinating fast control activity with measurement and communication requirements.

Package and temperature choices also affect selection. The listed packages include a 337-ball nFBGA and a 176-pin HLQFP, while temperature options distinguish S devices, specified by junction temperature, from Q1-qualified variants intended for automotive applications. Consult the device data sheet for the exact ordering code, package, pin functions and operating conditions.

Practical implications for design teams

The F2838x architecture is most useful when teams treat its CPUs, CLA, CM, memory and peripherals as resources to be deliberately partitioned. Map time-critical control loops to the C28x and CLA resources that fit the workload, assign suitable communication handling to the CM, and verify how shared interfaces are allocated. Then confirm that the chosen device provides the required analog channels, PWM features, CLB support, package and safety documentation. This early review turns a broad feature set into a practical system architecture for industrial control.

Access Official Technical PDF

About The Author