Access Official Technical PDF

Share Summary:LinkedInEmail

TMS320F2833x digital signal controllers (DSCs), together with the related F2823x family, bring CPU processing, signal acquisition, and control peripherals into one device for demanding real-time applications. Their combination of a 32-bit C28x core, pulse-width modulation (PWM), analog-to-digital conversion, and serial interfaces makes them relevant to engineers designing industrial drives, servo systems, CNC equipment, and power-conversion products.

Choosing among family members requires more than comparing clock speed. Memory capacity, floating-point support, peripheral counts, package, and temperature grade all affect the fit. Understanding those differences helps teams evaluate the controller against control-loop, interface, and integration requirements.

TMS320F2833x digital signal controllers: processing for control

The devices use a 32-bit TMS320C28x CPU with a Harvard bus architecture and a unified memory programming model. Selected models operate at up to 150 MHz, equivalent to a 6.67-nanosecond instruction cycle; other listed variants operate at 100 MHz, or a 10-nanosecond cycle. The F2833x devices include a single-precision IEEE 754 floating-point unit, while the F2823x devices do not.

The CPU supports multiply-accumulate operations, including 16-by-16 and 32-by-32 MACs, as well as a dual 16-by-16 MAC. These capabilities support the arithmetic demands of embedded control and signal processing. A six-channel DMA controller can move data for peripherals such as the ADC, McBSP, ePWM, external interface, and on-chip RAM, helping manage transfers alongside CPU tasks.

Control peripherals connect sensing and actuation

The integrated control resources are a central feature for motion and power applications. The family provides six ePWM channels, with up to 18 PWM outputs, and up to six high-resolution PWM channels. The HRPWM feature is specified with 150-picosecond MEP resolution. Device comparisons show that the available high-resolution channels vary: the 100-MHz F28333 and F28232 configurations list four, while several other variants list six.

For position and timing feedback, the controllers include up to six 32-bit event-capture inputs and two quadrature encoder interfaces. The capture units can also be used as auxiliary PWM outputs. Together, PWM generation, capture, and encoder interfaces provide building blocks for coordinating output switching with measured speed, position, or event timing. The exact channel mix should be checked against the selected part number.

The 12-bit ADC has 16 input channels arranged through two eight-channel input multiplexers, two sample-and-hold circuits, and an 80-nanosecond conversion time. It supports single or simultaneous conversions and can use an internal or external reference. In a control design, these resources provide a way to acquire analog signals for processing by the CPU and use the resulting control calculations to update outputs.

Memory and device variants

Flash and single-access RAM (SARAM) capacity differ across the family. The F28335 and F28235 provide 256K × 16 flash and 34K × 16 SARAM; the F28334 and F28234 provide 128K × 16 flash and 34K × 16 SARAM. The F28333 provides 256K × 16 flash and 34K × 16 SARAM, while the F28332 and F28232 provide 64K × 16 flash and 26K × 16 SARAM. All listed devices include 1K × 16 OTP ROM and 8K × 16 boot ROM.

On-chip code security protects flash, OTP, and RAM blocks. Where system design calls for external memory or devices, the 16- or 32-bit external interface (XINTF) offers more than 2M × 16 address reach. These options make memory planning an important part of part selection: application code, control algorithms, communications, and data-handling needs must fit the chosen device’s resources.

Communications, integration, and development

The serial interfaces support connections to other controllers, sensors, and system components. Depending on the device, the family includes up to two CAN modules, three SCI (UART) modules, two McBSP modules that can be configured as SPI, one SPI module, and one I2C bus. The shared GPIO bank provides up to 88 individually programmable pins, many multiplexed with peripheral functions. Pin allocation therefore needs to be considered early, especially when a design uses several communications and control interfaces at once.

Three 32-bit CPU timers, a watchdog, a peripheral interrupt expansion block supporting 58 peripheral interrupts, and eight external core interrupts provide system timing and interrupt resources. Development support listed for the family includes C/C++ compiler, assembler and linker tools, Code Composer Studio, DSP/BIOS and SYS/BIOS, and digital motor-control and digital-power software libraries.

Practical selection considerations

Before choosing a specific DSC, compare the requirements of the application with the device-level differences and hardware constraints. Key checks include:

  • Processing: Confirm the required operating frequency and whether floating-point hardware is needed; the F2823x family does not include the F2833x floating-point unit.
  • Memory: Match flash and SARAM capacity to the application and its data needs.
  • Control I/O: Verify PWM, high-resolution PWM, capture, encoder, and ADC requirements against the selected device’s feature table.
  • Connectivity: Account for serial interfaces, GPIO multiplexing, and any need for the external XINTF.
  • Hardware implementation: Select a supported package and temperature option, and review pin functions, power requirements, and thermal guidance for the design.

Available packages include LQFP, thermally enhanced LQFP, and BGA options. Temperature grades listed include –40°C to 85°C and –40°C to 125°C options; the Q-grade options are identified as AEC-Q100 qualified for automotive applications. Package and grade availability differs by device, so the ordering information should be checked for the exact variant.

Conclusion

The TMS320F2833x and F2823x families combine real-time CPU processing with integrated sensing, PWM generation, feedback, memory, and communications resources. That integration can support industrial motion and power-control architectures, but the devices are not interchangeable in every respect. Engineers and system integrators should map control-loop needs, memory, peripheral counts, package, and operating-temperature requirements to the detailed specifications of the individual part before committing to a design.

Access Official Technical PDF

About The Author