For an implantable left ventricular assist device (LVAD), a percutaneous driveline provides a continuous connection to external power—but it also passes through the skin. Transcutaneous energy transfer (TET) offers a way to supply power wirelessly, with the potential to eliminate that physical connection. Designing such a system is a demanding power-electronics challenge: it must transfer substantial power efficiently while managing heat, electromagnetic exposure, control and backup power.
Why wireless power matters for LVADs
LVADs support blood circulation in people with severe heart failure. Their continuous power demand is too high for an implanted battery alone to supply over an extended period, so present systems use a percutaneous cable. The driveline can affect patient quality of life, and damage or irritation at its exit site can create conditions for infection. Removing the skin-penetrating connection is therefore an important objective in the development of fully implantable mechanical circulatory support.
A wireless link does not remove the need for external energy. Instead, it transfers power across the skin without a galvanic connection. An implanted backup battery remains important: it can maintain pump operation if power transfer is interrupted and allow periods of untethered use. The system must also account for charging that battery as well as supplying the LVAD.
How transcutaneous energy transfer works
For the power levels required by mechanical circulatory support, inductive power transfer (IPT) is a relevant approach. An external transmitting coil is positioned near an implanted receiving coil. Power electronics drive alternating current through the transmitter, creating a magnetic field that induces voltage in the receiver. On the implanted side, the received AC power is rectified to DC for the LVAD and other loads.
A complete TET system involves more than the coil pair. Its main functions include:
- External power conversion: supplies and controls the energy delivered to the transmitting coil.
- Inductive link: transfers energy across the tissue between external and implanted coils.
- Implanted conversion and power management: rectifies and distributes power, including to the battery-charging stage.
- Control and communication: coordinates operation and supports monitoring and device control.
In the reported system development, the target was up to 30 W of transferred electrical power. That level reflects the combined needs of the LVAD and internal battery charging, rather than the pump load alone.
Efficiency, coil alignment and circuit design
Efficiency matters for two closely related reasons: conversion losses reduce the energy available to the implant, and losses become heat. The research compared IPT circuit arrangements using analytical and numerical models, identifying series-series compensation as a suitable topology for the power range considered. In this arrangement, capacitors compensate the inductive behavior of both coils to form a resonant power-transfer circuit.
Operating conditions affect how that circuit behaves. The work examined operation at resonance and above resonance, each with different control and performance trade-offs. A prototype of the IPT converter stage achieved a measured DC-to-DC efficiency of up to 97% while transferring 30 W across a 10 mm air gap with 70 mm-diameter coils. This figure applies to the IPT converter stage—not the complete implanted system.
Coil separation and lateral misalignment influence magnetic coupling and, consequently, link performance. The physical arrangement of the coils is therefore part of the electrical design, not simply a packaging detail. Designers must also consider conversion stages on both sides of the link. A comparative evaluation of hard-switched and soft-switched DC-DC converter approaches found that the conventional hard-switched option performed better in the comparison unless the constant control-power losses of the soft-switched solutions could be substantially reduced.
Thermal and electromagnetic safety
High efficiency alone does not establish safe operation. Power dissipated in the coils and electronics can warm surrounding tissue, so thermal behavior must be assessed alongside electrical performance. The work used numerical thermal models and measurements to examine heating around the energy-transfer coils.
Electromagnetic exposure is another design consideration. Numerical simulations were used to assess fields in relation to exposure requirements and to investigate design constraints. This kind of assessment helps identify physical limits on the transfer system; it is distinct from simply measuring converter efficiency. Both thermal and electromagnetic evaluations are needed when considering a high-power inductive link near the body.
Integration beyond the power link
A practical implant also needs a backup battery, a charging converter, control electronics and communication hardware. These functions compete for limited implant volume and must operate as a coordinated system. Communication can support real-time control of power transfer as well as higher-level monitoring and device functions. The described prototype integrated the implanted IPT receiver with control, battery charging and communication electronics, including an antenna designed for operation inside the body.
For the integrated TET system, the reported overall DC-to-DC efficiency reached up to 90%, depending on operating mode, at maximum transfer power and the minimum 10 mm coil separation. This lower system-level figure compared with the converter-stage result illustrates why subsystem performance and complete-system performance should be evaluated separately.
Practical implications for system designers
Developing wireless power for an LVAD requires coordinated decisions across power electronics, mechanical packaging, thermal design and communications. Engineers and system integrators evaluating a TET architecture should consider:
- How coil geometry, separation and alignment affect coupling and operating margin.
- Where losses occur across the complete power path, not only within the inductive converter.
- How the system manages heat and assesses electromagnetic exposure.
- How backup energy, battery charging and pump power are coordinated.
- How control and communication functions fit within the implant design.
Transcutaneous energy transfer is a promising route toward fully implantable mechanical circulatory support, but its value depends on more than transmitting power through the skin. The practical challenge is to balance efficiency, safe operation, compact integration and reliable control across the entire system. The reported prototypes demonstrate the feasibility of high-power inductive transfer under defined test conditions, while also showing why system-level validation remains essential.