Access Official Technical PDF

Share Summary:LinkedInEmail

Electrodeposited nickel chalcogenide thin films are being investigated as potential materials for solar and photoelectrochemical (PEC) devices. In a reported comparison, nickel disulfide (NiS2) and nickel diselenide (NiSe2) films were deposited on indium tin oxide (ITO)-coated glass and assessed for their structure, composition, optical response and semiconductor behavior. The findings show how deposition conditions shape film growth—and why material characterization is an important step before evaluating a candidate for energy conversion.

Why investigate nickel chalcogenide thin films?

A PEC cell uses a semiconductor–electrolyte interface to convert solar energy into electrical or chemical energy. Silicon is widely used in PEC fabrication, but its cost can be a concern for large-scale production. Transition metal chalcogenides are of interest because of their optical, electrical and semiconductor properties, particularly in thin-film form.

Nickel is considered as an alternative to cadmium in chalcogenide materials. The source study focuses on NiS2 and NiSe2, rather than tellurides, because sulfur and selenium have more similar chemical behavior to one another than either does to tellurium. The aim was to examine how the two nickel compounds could be synthesized and how their film properties compare.

Electrodeposition process and growth conditions

Electrodeposition provides a solution-based approach to forming films on a conductive substrate. In this work, the substrate was ITO-coated glass, cleaned ultrasonically in deionized water and then ethanol before deposition. The aqueous baths contained nickel sulfate as the nickel precursor. Sodium thiosulfate supplied sulfur for NiS2, while sodium selenite was used for NiSe2.

Triethanolamine (TEA) was added to the bath to support adhesion and help control deposition rate. The solution pH was adjusted to approximately 10, and deposition took place at 40 ± 2°C. A three-electrode arrangement connected the ITO-coated glass as the working electrode, graphite as the counter electrode, and a saturated calomel electrode as the reference.

Film formation was described as an ion-by-ion growth process. Ionic species move through the electrolyte to the substrate, where reduction and reaction produce the compound. Nucleation occurs first; as deposition continues, the initial nuclei support subsequent film growth. Cyclic voltammetry was used to examine the deposition reactions and identify potential regions associated with deposition.

Deposition time affects film quality

The study found an initial induction period of about 10 minutes before film growth proceeded. Thickness increased with deposition time, but longer deposition was not automatically better. The reported films reached their maximum thickness at around 30 minutes for NiS2 and 25 minutes for NiSe2. Beyond these durations, films began to peel from the substrate: NiS2 at 35 minutes and NiSe2 at 30 minutes.

Deposition potential also influenced the result. The reported conditions for improved crystallinity and uniformity were −0.9 V for NiS2 and −1.0 V for NiSe2. At other conditions, films showed poorer crystallinity, weaker adhesion, or cracking and peeling. These observations underline a practical materials-processing point: deposition time and potential need to be considered together with bath chemistry and temperature.

What characterization revealed

Structure, morphology and composition

X-ray diffraction identified the NiS2 film as polycrystalline with a cubic structure, while NiSe2 showed a polycrystalline orthorhombic structure. The reported crystallite sizes were in the range of 38–60 nm for NiS2 and 15–35 nm for NiSe2. Energy-dispersive X-ray analysis confirmed the presence of nickel and the relevant chalcogen, with measured compositions close to the expected 1:2 nickel-to-chalcogen ratio.

Microscopy showed that the films were generally continuous, adherent and uniform under the selected deposition conditions. Their surface forms differed: NiS2 developed needle-like structures as deposition time increased, while NiSe2 showed more spherical grains. The NiSe2 films began to crack and peel with excessive deposition time, consistent with the importance of controlling growth rather than simply seeking greater thickness.

Optical and semiconductor response

Optical analysis indicated direct bandgaps for both materials. The reported bandgap ranges decreased as deposition time increased: from 1.34 to 1.12 eV for NiS2 and from 1.30 to 1.15 eV for NiSe2 across the examined deposition times. The authors associated this trend with changes including film thickness and crystallinity; it is a measured relationship in this study, not a universal rule for every deposition process.

Mott–Schottky analysis indicated p-type behavior for both films. This technique helps assess semiconductor properties at an interface, including flat-band potential and carrier-related parameters. The study reported that flat-band potential increased with deposition time for both materials. Based on the semiconductor parameter analysis, NiS2 was assessed as having better energy-conversion efficiency potential than NiSe2. This comparison does not establish device-level solar-cell efficiency.

Implications for solar and PEC materials development

For engineers and technical decision-makers evaluating emerging energy materials, the main value of this work is its connection between controllable process inputs and measurable film characteristics. Electrodeposition produced NiS2 and NiSe2 films on a transparent conductive substrate, while variation in deposition time and potential affected thickness, crystallinity, morphology and adhesion. Those factors matter when assessing whether a thin film is suitable for subsequent device integration.

The results support further evaluation of nickel chalcogenides as candidate PEC or solar-cell materials, but they are not evidence of a complete, production-ready energy-conversion system. The work characterizes deposited films and their semiconductor properties; practical device performance would require evaluation at the cell level.

Conclusion

Electrodeposited NiS2 and NiSe2 thin films show promising characteristics for continued investigation, including polycrystalline structures, direct bandgaps and p-type semiconductor behavior. The study also makes clear that film quality depends on controlled deposition: suitable potential and duration support better-formed films, while excessive growth can lead to cracking or delamination. For materials development, the practical takeaway is to treat process optimization and characterization as essential steps before drawing conclusions about solar or PEC device performance.

Access Official Technical PDF

About The Author