An adaptive robotic gripper can help manufacturers handle a wider range of parts without changing the end effector for every task. That flexibility, however, depends on more than finger movement: the mechanism must transmit motion reliably, support the intended loads and resist deformation that could affect positioning. A gripper design study illustrates how belt-drive selection and finite element analysis (FEA) can inform these engineering decisions.
Why consider a universal industrial robot end effector?
Production lines often use application-specific grippers designed around particular part geometries. When a process needs several specialized tools, changing end effectors can add equipment and introduce downtime during tool swaps. A universal design instead aims to accommodate multiple workpiece configurations with one device.
The gripper examined in the study has three fingers and two configurations: one for gripping objects from 10 to 80 mm, and another for round objects from 10 to 120 mm in diameter. Its stated maximum payload is 25 kg, while the device itself weighs 56 kg. These figures describe the proposed design and should be considered in the context of the intended robot, mounting arrangement and application.
Adaptability also comes with a mechanical trade-off. A mechanism that accommodates different shapes must manage forces that may not be evenly distributed across its fingers. The supporting structure therefore needs to be assessed under demanding configurations, not only under ideal, symmetrical gripping conditions.
Designing the finger drive and robot interface
The finger-rotation mechanism uses a toothed belt transmission with a 1:1 ratio. The design specifies a PowerGrip HTD 550-5M-9 belt and 26-tooth pulleys. The drive was calculated using both a conventional analytical method and a numerical design tool; the paper reports that the two approaches produced the same results.
Alongside the drive, the robot interface includes an extension adapter. Its purpose is to provide an offset between the robot head and gripper, supporting the required gripping space and helping define potential collision concerns. The adapter is shaped to suit the robot mounting dimensions and includes holes intended for attaching cable harnesses or air lines if required.
These details highlight a practical point for system integrators: end-effector design is a package of interacting decisions. Transmission components, mounting geometry, clearance, service connections and the workpiece envelope all affect whether a gripper can be incorporated into a cell as intended.
Using finite element analysis to assess gripper stiffness
The study focused its FEA on the connecting plate, which can experience asymmetric loading when the fingers grip a non-circular object. The analyzed condition used the maximum finger-opening configuration, reported as 96.59 degrees, where forces from the individual finger mechanisms act on the plate.
Two candidate plate materials were compared: EN AW 6082 aluminum alloy and STN 11 523 steel. The analysis used a 1.3 mm mesh and applied constraints to represent the plate’s connection to the ball-screw nut. The purpose was to assess whether loading could cause deformation large enough to affect the gripper’s positioning accuracy.
Displacement results informed material selection
The reported maximum displacement was 0.129 mm for EN AW 6082 and 0.045 mm for STN 11 523 steel. Although the calculated stress values were reported as within permissible limits for both materials, the greater displacement of the aluminum plate raised a concern about positioning accuracy. The designers therefore selected STN 11 523 steel for the connecting plate, citing its greater stiffness and lower calculated displacement.
This comparison shows why stress alone is not always enough to guide component selection. A part may remain within an allowable stress limit yet still deflect enough to matter to a precision handling task. For gripper structures, engineers should evaluate the relevant deformation as well as strength, using boundary conditions and load cases that represent the intended mechanism and operating configuration.
What the design means for automation teams
The proposed gripper is described as theoretically functional and ready for implementation, but the paper does not report production validation. Its analysis is therefore useful as a design example rather than proof of performance in a specific manufacturing cell. Before deployment, engineering teams need to confirm that the gripper, robot and process requirements align.
- Check payload and reach: account for the gripper’s 56 kg mass as well as the workpiece payload when assessing the robot application.
- Review gripping geometry: verify that the stated ranges and two configurations suit the actual parts and required orientations.
- Assess stiffness: consider whether plate deflection under realistic, potentially asymmetric loads could affect placement accuracy.
- Validate integration: confirm mounting, clearance, cable or air routing, and the finger construction needed for the target gripping range.
The design also allows the gripping diameter to be increased by changing the finger construction rather than replacing the entire gripper. That approach may support adaptation, but the resulting finger geometry and loads would need their own engineering assessment.
Conclusion
A universal adaptive gripper can address handling tasks that would otherwise require multiple dedicated end effectors, but flexibility must be balanced against structural stiffness, payload and integration constraints. In this design, belt-drive calculations supported the finger mechanism, while FEA comparison led to the selection of steel for a critical connecting plate because it showed lower displacement than the aluminum alternative. For automation engineers and integrators, the practical lesson is to evaluate the complete end-effector assembly under representative loads and configurations, with positioning requirements treated as a design criterion alongside strength.