Access Official Technical PDF

Share Summary:LinkedInEmail

An additive manufacturing laboratory is more than a collection of 3D printers. It is an operating environment that connects digital design, process selection, material handling, machine operation and post-processing. For engineers, system integrators and academic or industrial decision-makers, understanding these interdependent activities is essential to evaluating equipment needs and building a sustainable laboratory.

A study of European university activity and Trinity College Dublin’s Ar-Lab offers a useful framework: examine the AM processes and market first, then translate those findings into a practical operating and financial plan. The work focused on universities in the UK, Germany, Italy and France, and considered how a research laboratory could develop revenue streams alongside its academic activity.

Additive manufacturing processes and the digital workflow

Additive manufacturing (AM), often called 3D printing, creates parts from digital model data by joining material, typically layer by layer. Unlike subtractive manufacturing, which removes material from a workpiece, AM builds the geometry through a sequence of deposited, fused, bonded or otherwise joined layers.

Although individual technologies differ, a typical workflow moves through several connected stages:

  1. Design: Create a three-dimensional model in computer-aided design (CAD) software. Computer-aided engineering tools may help assess factors such as temperature, pressure and applied forces.
  2. File preparation: Convert the model into a format the AM workflow can process, then divide it into layers using slicing software.
  3. Build preparation: Check the part’s orientation and position, determine whether supports are needed, and set machine parameters. Prepare and characterize the feedstock for the process.
  4. Build and finishing: Produce the part, remove it from the build environment, clear away supports or excess material, and carry out any required cleaning or surface finishing.
  5. Inspection: Evaluate the finished component against its intended requirements. The appropriate tests depend on the part and application.

These steps are not identical for every machine. Some are automated, while others require operator decisions and manual work. Preparation and finishing can therefore have a substantial influence on laboratory staffing, equipment use and project costs—not just print time.

Choosing among additive manufacturing processes

AM is a family of processes rather than a single production method. The technology must be matched to the material, geometry and intended use of the component. The study discusses several established categories, including directed energy deposition, binder jetting, sheet lamination, material jetting, material extrusion, stereolithography and powder bed fusion.

Metal deposition and powder-based approaches

Directed energy deposition (DED) uses focused thermal energy to melt material as it is deposited. Feedstock may be supplied as powder or wire, and the process can be used to build metal components or add material to existing parts. Process parameters such as laser power, scanning speed and feed rate affect how the build is executed. DED can support repair and coating work, but components may need substantial secondary machining, and surface finish can be a limitation.

Binder jetting selectively applies a liquid bonding agent to a powder bed. After each layer is printed, another layer of powder is spread and the cycle repeats. The process can be used with materials including metals, ceramics and polymers. Its potential benefits include producing complex geometries without the same thermal effects associated with melting processes. However, printed metal parts may require subsequent processing, and porosity, mechanical performance and shrinkage during sintering must be considered.

Other process families

Sheet lamination bonds sheets of material to form a part; metal-based ultrasonic additive manufacturing combines bonding with machining. Material extrusion forms parts by depositing material through a nozzle, while material jetting deposits droplets. Stereolithography uses light to solidify liquid photopolymer, and powder bed fusion selectively consolidates material in a powder bed. Each category brings its own material choices, machine requirements and post-processing demands.

For laboratory planning, this range matters because a broad technology portfolio can support different research questions and materials, but it also adds complexity. Equipment selection should be considered alongside feedstock preparation, operator skills, safety arrangements, maintenance and the finishing operations associated with each process.

What the European university market analysis examines

The European analysis compiled information on approximately 160 universities across four countries. Institutions ranged from research and innovation centers to academic laboratories, student-facing printing services and engineering faculties without a dedicated AM laboratory. The goal was not simply to count printers, but to build a picture of how additive manufacturing was being introduced and supported in higher education.

The analysis organized its findings around several dimensions:

  • Geographic distribution: Where universities investing in AM were located.
  • Laboratory readiness: How laboratories were classified using Technology Readiness Level (TRL) as a framework.
  • Investment: The estimated level of university expenditure and the institutions making investments.
  • Technology and suppliers: The AM processes in use and the manufacturers represented in the academic market.

This approach provides context for organizations considering an AM facility. A laboratory’s purpose, level of technical maturity and mix of processes can be as informative as its equipment inventory. The analysis also compared the university market with wider 3D printing market estimates, while recognizing that the academic equipment segment is only one part of the broader market for printers, materials, software and services.

Building an operating and financial plan for an AM lab

Trinity College Dublin’s Ar-Lab was established for academic and research use, with equipment spanning materials such as ceramics, polymers and biomaterials. Its planning challenge was to understand how the laboratory’s costs and revenues could be organized over time, and how it might reduce reliance on external financial support.

A useful plan distinguishes costs by the parties involved. The study considered project-level costs associated with principal investigators, costs borne by the college and direct laboratory costs. Relevant operating items include machine maintenance, materials, warranties and hazardous-waste removal. These expenses should be linked to how equipment is actually used and to the requirements of the processes available in the lab.

Revenue planning should likewise separate existing activity from potential additions. The analysis considered academic hourly rates and the organization of AM-focused events and courses as possible revenue streams. Such activities need to be assessed in relation to laboratory capacity, staffing and the resources required to deliver them; they are not a substitute for accurately understanding costs.

For managers evaluating an AM facility, a practical planning sequence is to:

  • Define the lab’s research, teaching and service objectives.
  • Map equipment and processes to the materials and work those objectives require.
  • Identify machine, material, maintenance, safety and finishing costs.
  • Clarify how project, institutional and laboratory expenses are allocated.
  • Evaluate potential revenue streams and model their contribution over time.

Conclusion: connect technology choices to sustainability

An additive manufacturing laboratory succeeds through alignment: process capabilities must fit the work, digital preparation must lead into controlled production, and post-processing and inspection must be accounted for. Market analysis can help place an academic or research facility in context, while a detailed financial model makes its operating requirements visible. For technical and business decision-makers, the central implication is clear: plan the laboratory as an integrated service and research operation, not simply as a purchase of 3D printers.

Access Official Technical PDF

About The Author