Access Official Technical PDF

Share Summary:LinkedInEmail

Aircraft electric propulsion has the potential to change how aircraft are powered, designed and operated. The opportunity extends from smaller general aviation aircraft and urban air taxis to regional and, eventually, large commercial platforms. But the path is not simply a matter of replacing a fuel-burning engine with a motor. It depends on coordinated progress in energy storage, electrical systems, aircraft integration, safety certification and market demand.

The industry outlook described in the 2018 analysis was one of rapid experimentation: around 100 electrically propelled aircraft programmes were in development worldwide. Many targeted general aviation or urban air mobility, where power requirements are lower than for large passenger aircraft. The scale of activity was notable, but development programmes still faced substantial technical and commercial hurdles.

Aircraft electric propulsion: where the technology stands

The power needed for flight varies significantly by aircraft type. Technologies for smaller general aviation applications were considered more accessible than those required for regional or large commercial aircraft. As aircraft size, range and payload increase, so does the challenge of providing sufficient power without imposing an unacceptable weight penalty.

Batteries and aircraft weight

Battery energy density is a central constraint. Unlike conventional aircraft, which become lighter as fuel is consumed, a battery-powered aircraft carries its energy storage throughout the flight. That means the weight of the power source does not decline in the same way during operation.

The 2018 analysis estimated that batteries would need a gravimetric energy density of about 500 Wh/kg for electric propulsion to begin competing with traditional propulsion systems on a like-for-like basis. It did not expect that level before 2030. Lithium-ion batteries were viewed as the most attractive near-term option because of their relative energy density and ability to withstand repeated cycles. Continued development, along with investment driven by automotive battery manufacturing, was identified as important to improving performance and reducing costs.

Motors, heat and electrical power

For larger aircraft, the challenge is not only producing enough motor power. Motors must also deliver high power relative to their weight and manage heat effectively under demanding operating conditions. Heat removal is essential to protect equipment during sustained operation, while improvements in motor efficiency can reduce both energy losses and thermal-management demands.

Power electronics are another critical part of the propulsion system. They connect energy sources such as batteries and generators with motors and other loads. The analysis highlighted silicon carbide (SiC) and gallium nitride (GaN) as wide-bandgap semiconductor options with potential advantages over legacy insulated-gate bipolar transistor technology. Their trade-offs include cost, production requirements and voltage capability—factors that shape their suitability for different aircraft applications.

System integration and aircraft design

Electric propulsion changes more than the engine. Designers must coordinate generators, batteries, motors, power electronics and high-voltage wiring while accounting for weight, safety, efficiency and the aircraft’s overall layout. For a hybrid-electric aircraft, for example, the position of a gas turbine and generator affects inlet design, shaft arrangements and total system weight.

High-voltage cabling presents its own design considerations. Lower-voltage cables can be heavier, while higher-voltage systems require careful management of arcing and sparking risks. Insulation can help address those risks, but adds weight and takes up space. These choices have to be resolved as part of the complete aircraft architecture, not as isolated component decisions.

Electrification may also encourage new airframe configurations. Distributed propulsion, in which multiple propulsors are positioned around the aircraft, can give designers more flexibility than a conventional arrangement. The potential gains depend on the interaction between propulsion and airframe design; they cannot be assessed by looking at the motor alone.

Certification and regulation are essential enablers

Aircraft technology must meet rigorous airworthiness requirements before entering service. New electrical components, higher voltages and unfamiliar propulsion architectures raise certification questions that do not arise in the same way for conventional aircraft. Aviation authorities must establish how safety requirements apply to these systems while preserving the sector’s focus on safe operation.

Regulation can also influence the pace of adoption through emissions policy. However, the long service life of commercial aircraft means that fleet change is gradual. Even if new electrically propelled models become available, replacing the existing fleet takes time. Any policy that accelerates adoption could have consequences for manufacturers, suppliers, operators and aircraft asset values, so the transition involves more than engineering decisions.

Market demand will determine where adoption begins

Operators need a compelling operational case before adopting new aircraft. Potential benefits identified in the analysis included lower energy and maintenance costs, as well as the possibility of improved environmental credentials. These benefits would need to be weighed against the risks of introducing new technology, proving reliability and adapting airport infrastructure.

Different segments face different conditions:

  • General aviation: Lower power requirements make smaller aircraft a more accessible area for early development.
  • Urban air mobility: Electric vertical take-off and landing aircraft are designed for short trips, but safe integration into airspace and passenger confidence are key considerations.
  • Regional aviation: Quieter aircraft could make some routes or airport locations more practical, while hybrid-electric designs could help address range and power needs.
  • Large commercial aircraft: High power and range requirements make this the most demanding segment for battery-only propulsion. Hybrid-electric architectures may offer an intermediate path.

The 2018 outlook presented hybrid-electric regional aircraft as a nearer-term prospect than all-electric large aircraft. Its expert panel expected a fare-paying flight by an aircraft with more than 50 seats between London and Paris in 2032. That date was a forecast made at the time, not a confirmation that the milestone occurred.

Practical implications for automation and aerospace teams

Aircraft electrification brings industrial automation expertise into closer contact with aerospace requirements. Power conversion, thermal management, system monitoring and integration all matter, but aerospace applications add strict constraints around weight, reliability and airworthiness. Engineers evaluating the opportunity should consider the full energy and control architecture, including how components behave together and how the system will be certified.

For decision-makers, the key question is not simply whether electric flight is possible. It is which aircraft segments can support it, with what propulsion architecture, and under what operational and regulatory conditions. Battery limits may constrain all-electric designs, while hybrid systems introduce additional integration demands. In each case, credible progress depends on aligning technology readiness with aircraft requirements and operator needs.

Conclusion

Aircraft electric propulsion offers a route to new aircraft architectures and potentially lower-emission flight, but adoption depends on more than advances in batteries. Motors, power electronics, high-voltage systems, thermal management, system integration and certification must progress together. Smaller and regional applications offer different entry points from large commercial aviation, and each must demonstrate a workable operational case. For industrial and aerospace decision-makers, the practical priority is to assess electrification as a complete system—one shaped by engineering limits, safety requirements and market demand.

Access Official Technical PDF

About The Author