In industrial automation, sensing, communication, power delivery, and equipment monitoring all depend on the boundary between physical signals and digital control. Analog mixed-signal circuits make that boundary work: they condition and convert signals, manage power, and support the radio-frequency links used to move data. Research described in the Texas Analog Center of Excellence (TxACE) 2018–2019 annual report highlights several circuit and system challenges with direct relevance to industrial electronics, connected sensors, and automation platforms.
The report organizes its work around three intersecting areas: safety, security and health care; energy efficiency; and fundamental analog research. Although many projects address broad applications such as IoT and automotive systems, their underlying design questions—how to acquire useful signals, supply power efficiently, maintain reliability, and validate complex designs—also matter to industrial engineers and system integrators.
Why analog mixed-signal circuits matter in automation
Digital processors and controllers cannot operate on physical measurements alone. Sensors produce analog signals, while actuators and power stages require electrical control. Converters, amplifiers, timing circuits, and power-management blocks connect these functions to digital processing. As more systems integrate sensing and analog functions alongside digital logic, the quality and efficiency of these supporting circuits can affect the broader system architecture.
TxACE’s research scope spans low-frequency circuits through terahertz, data converters from low sampling rates to tens of gigasamples per second, and power conversion from microwatts to watts. This range reflects the variety of requirements facing designers: a low-power sensor node has different constraints from a high-speed communications interface, but both rely on carefully designed analog and mixed-signal building blocks.
Industrial condition monitoring starts with sensing
Several research tasks in the report focus on measurements that can help characterize the condition of systems and components. These include wide-band vibration sensors, carbon dioxide sensors, and techniques for monitoring the health of motors, power devices, and mixed-signal circuits. Another project examines condition monitoring of industrial and automotive drive components through leakage flux.
For automation applications, the practical connection is the measurement chain. A useful monitoring system needs to capture a physical signal, convert it into data, and provide information that digital systems can process. Analog-to-digital converters (ADCs) and sensor-interface circuits are therefore not peripheral details: their resolution, bandwidth, power consumption, and ease of integration shape what a sensing system can support.
One reported ADC effort developed a time-interleaved noise-shaping successive-approximation-register architecture. The prototype demonstrated a 50 MHz bandwidth and a measured signal-to-noise-and-distortion ratio of 70.4 dB without calibration. The work addresses a design trade-off relevant to sensor interfaces: achieving higher bandwidth and resolution while limiting power and avoiding burdensome input-drive requirements.
Power management is part of system performance
Connected sensors, embedded controllers, and system-on-chip designs depend on power conversion and regulation. TxACE projects investigated switched-capacitor regulators, integrated voltage regulators, single-inductor multiple-output converters, and direct battery-to-silicon power delivery. Other research considered energy harvesting and ways to use stored energy in intermittently powered devices.
These efforts illustrate why power management cannot always be treated as a separate supply-design task. Converter behavior interacts with the loads it powers. For example, one project explored tuning an integrated voltage regulator based on the performance of a digital load, rather than evaluating the regulator in isolation. Another investigated coordinated clock and power regulation to address ripple and transient-response challenges in systems with multiple voltage domains.
For industrial equipment, the relevant engineering question is how the power subsystem behaves under changing loads and operating conditions. Regulation, transient response, efficiency, and electromagnetic interference (EMI) can influence the design of the complete electronic assembly. The report also describes adjustable gate driving for a GaN DC-DC buck converter, using different drive strengths during switching to address EMI and power-loss considerations.
Security, reliability, and design verification
As sensors and control devices become connected, hardware security and circuit reliability become part of the system design. The report includes work on mixed-signal hardware security, intrinsic identifiers for remote authentication of IoT edge devices, and security protocols designed for energy-harvested devices. It also covers testing, fault characterization, degradation monitoring, and methods for identifying design errors in mixed-signal systems.
Verification is especially challenging because analog behavior and digital logic interact. TxACE projects examined hierarchical analog and mixed-signal verification using formal methods and machine learning, as well as automated validation and debug across pre-silicon and post-silicon design stages. For engineering teams, the broader lesson is that verification and testability need to be considered alongside circuit performance, particularly when a design combines many interacting blocks.
Research collaboration connects circuits and applications
TxACE was established through collaboration among universities, industry, and public-sector sponsors. Its industrial advisory boards help identify research needs and select tasks in consultation with center leadership. The 2018–2019 report records 57 funded research tasks led by 60 principal investigators across 27 institutions, with 184 graduate and undergraduate students supported during the year.
The center also made specialized laboratory instruments and expertise available to researchers and industrial partners. Its facilities covered RF and terahertz work, integrated system design, embedded signal processing, analog and mixed-signal research, and computer-aided design. This shared infrastructure supports research that crosses the boundary between circuit concepts and practical measurement.
Practical implications for automation teams
For plant engineering and automation teams, the research points to several considerations when selecting or developing electronic platforms:
- Match the signal chain to the measurement. Sensor bandwidth, converter performance, and input requirements should be considered together.
- Evaluate power and load behavior as a system. Regulators, converters, and their digital loads interact, especially during transients.
- Include reliability and security in early design decisions. Testing, degradation monitoring, and device authentication are relevant to connected electronics.
- Plan for verification across domains. Mixed-signal systems need approaches that account for both analog behavior and digital control.
Analog mixed-signal research may take place at the circuit level, but its implications reach across industrial sensing, power electronics, communications, and embedded control. The practical takeaway is to treat these circuits as core parts of an automation system—not merely supporting components. Coordinating sensor interfaces, power delivery, security, and verification can help engineering teams make more informed design decisions as electronic systems become increasingly integrated.