Access Official Technical PDF

Share Summary:LinkedInEmail

Atomic layer deposition (ALD) is represented in the June 29, 2020 ALD/ALE program as a broad area of research, connecting materials chemistry and process development with applications in semiconductor manufacturing, energy, catalysis and more. Alongside deposition, the agenda gives substantial attention to atomic layer etching (ALE), highlighting the importance of controlled material removal as well as film growth. For engineers and technical decision-makers, the program’s session themes provide a useful map of the process challenges researchers were investigating.

Atomic layer deposition spans chemistry, process control and applications

The schedule is organized around ALD fundamentals, applications, and atomic layer etching. That structure reflects how many variables intersect in thin-film process development. Precursor chemistry determines which source materials are available for a process; surface reactions and process conditions influence film formation; and characterization helps establish what material was produced. The agenda includes dedicated sessions on each of these concerns, rather than treating ALD as a single equipment or materials topic.

In the precursor sessions, listed presentations address compounds for depositing noble metals, nickel-containing films, titanium disulphide, aluminum nitride, fluorine-doped tin oxide and other materials. Several titles focus not only on candidate precursors, but also on their synthesis, purification, volatility, thermal properties and evaluation. These topics matter to process development because a precursor must be considered as part of a complete deposition cycle—not in isolation from the desired film and reactants.

Other talks focus on reaction mechanisms and modeling. The agenda includes studies of surface species, nucleation and growth, as well as computational work on precursor and surface reactions. Design of experiments is also represented in a case study on developing a ternary ALD process. Together, these topics show the range of approaches used to investigate why a process behaves as it does and how process conditions relate to film properties.

Plasma-enhanced ALD and conformality

Plasma-enhanced ALD (PEALD) is a distinct focus in the program. Listed subjects include the effect of plasma parameters on film deposition, ion energy and flux, substrate bias, and the incorporation of nitrogen in cobalt-containing films. Other presentations examine plasma-assisted processes for materials such as titanium oxide and nitrides.

These topics underline a practical point for process engineers: plasma conditions are part of the process recipe, not merely an equipment setting. The agenda’s attention to plasma characteristics and resulting film properties indicates that researchers were examining how plasma exposure relates to material formation and interfaces. The schedule does not report comparative outcomes, but it identifies plasma control as an active area of investigation.

Conformality—the ability to form films across complex surfaces, including high-aspect-ratio features—is another recurring concern. The program includes poster topics on aluminum oxide ALD in lateral high-aspect-ratio test structures and comparisons of process conditions using such structures. For applications with three-dimensional features, conformality is a critical process question: a film’s properties on an accessible surface alone may not describe its coverage throughout a structure.

Atomic layer etching adds a complementary process focus

Where ALD builds films, ALE addresses controlled material removal through atomic-layer processing. The program features sessions on etching metals and alloys, metal oxides, and other materials, with topics spanning thermal, plasma and combined approaches. Presentation titles also point to mechanistic studies, in situ and in vacuo analysis, and investigation of volatile reaction products.

Selectivity and anisotropy appear in the wider program overview, alongside sessions on ALE for specific materials and devices. These terms represent important process objectives: selectivity concerns removing a target material in preference to other materials, while anisotropy concerns directionality in etching. The agenda also lists work on removable etch-stop layers and conversion-etch mechanisms, indicating interest in how surface modification and subsequent removal can be managed in cyclic processes.

For integration teams, the inclusion of both ALD and ALE is significant because deposition and etching can be considered together when shaping thin films and device structures. The schedule does not establish particular process advantages, but it makes clear that research attention extended across growth, removal, reaction mechanisms and process integration.

Applications extend beyond semiconductor devices

Semiconductor applications are prominent, with sessions dedicated to ALD for semiconductor technologies and selective deposition. But the program also lists work involving solar-energy materials, batteries and energy storage, catalysis, powders, medical-device coatings, optical coatings, memristive devices and other emerging applications.

This range illustrates why ALD research involves more than finding a process for a single material. The required film, substrate and application differ across fields, so research topics include both new materials and ways to control how films form. For example, the agenda includes ALD on powders for catalysis, metal hydrides for seasonal energy storage, and coatings on strongly curved substrates. These are program topics, not evidence of particular commercial outcomes, but they demonstrate the breadth of application areas under discussion.

What the program signals for technical teams

The June 29 agenda offers a snapshot of a research landscape in which process chemistry, plasma control, characterization and application requirements are closely connected. Engineers evaluating ALD or ALE developments can use these themes to frame technical questions:

  • What precursor and co-reactant chemistry is being investigated, and what film is it intended to produce?
  • How are plasma conditions, substrate bias or thermal steps treated in the process?
  • How is growth or etching characterized, especially on complex structures?
  • Does the work address selectivity, conformality, film composition or a specific application need?

These questions help distinguish a promising research direction from a process that has been evaluated against relevant integration requirements. The agenda itself is a schedule of presentations, not a comparative assessment of technologies, so individual results would need to be considered in the context of their full technical findings.

Conclusion

The program presents atomic layer deposition and etching as interconnected fields shaped by precursor development, surface chemistry, plasma processes, conformality and application-specific demands. For industrial automation and manufacturing teams, the practical takeaway is to assess thin-film processes as complete, characterized cycles—and to connect material and process choices with the geometry and function of the intended application.

Access Official Technical PDF

About The Author