Access Official Technical PDF

Share Summary:LinkedInEmail

Atomic layer processing is becoming increasingly relevant as semiconductor devices move toward smaller dimensions, complex material stacks and three-dimensional (3D) architectures. These structures place demanding requirements on fabrication: films may need to be only a few atomic layers thick, cover high-aspect-ratio features uniformly, or form selectively on particular surfaces. Atomic layer deposition (ALD) and atomic layer etching (ALE) provide cyclic approaches to controlling material addition and removal. Plasma-based variants add another process variable: the energy and directionality of species reaching the surface.

For industrial automation and process engineering teams, the practical challenge is not simply producing a film or removing material. It is controlling where processing occurs and how the resulting material behaves, while maintaining precision across intricate topographies.

Why device architecture is changing materials processing

Data-intensive computing applications have driven interest in new logic, memory and integration approaches. Examples include emerging non-volatile memories, stacked memory structures and concepts that bring data processing closer to where information is stored. These technologies use increasingly complex combinations of materials and 3D features.

As a result, conventional assumptions about uniform processing are not always sufficient. A fabrication sequence may require a conformal coating on all surfaces of a trench, a film only on its sidewalls, or different material properties on horizontal and vertical regions. Achieving such outcomes calls for precise control over both film thickness and surface reactions.

Atomic layer processing: controlled growth and removal

ALD and ALE share a cyclic structure based on sequential reactant exposures. In ALD, surface reactions add material. In ALE, reactions modify or activate a surface before material is removed. In both cases, self-limiting steps are intended to restrict each cycle to a controlled amount of growth or removal.

This cyclic approach supports uniform processing on planar substrates and conformal coverage of 3D structures. In ALD, for example, a film can coat the top, bottom and sidewalls of a trench. In ALE, isotropic removal can act on material across those same orientations. The ability to repeat controlled cycles makes these techniques relevant when thickness variability and feature geometry are critical.

How plasma changes process control

Thermal ALD and ALE rely on substrate heating to supply energy for surface reactions. Plasma-enhanced processes introduce reactive species generated in a plasma, including radicals, ions, photons and electrons. The reactive radicals can help reactions proceed under process conditions that differ from purely thermal approaches, while plasma operating parameters provide additional ways to influence film growth and properties.

Ion behavior is especially important because ions travel directionally toward the substrate. When the substrate is grounded, ion energies may be relatively low, and radical-driven reactions can dominate. With radio-frequency (RF) substrate biasing, ion energy can be increased. This changes how ions interact with the material and can influence properties such as film density, composition or resistance to subsequent etching.

These effects depend on process conditions, including the ion energy, flux, mass and dose, as well as the chemistry and the surface being treated. Ion and radical interactions can also work together. Therefore, ion control is not a simple independent adjustment: its effect must be understood in the context of the complete process.

Topographically selective processing on 3D surfaces

Topographically selective processing means treating differently oriented surfaces in different ways. In a trench, for instance, the horizontal top and bottom surfaces are oriented differently from the vertical sidewalls. Directional ions can reach some surfaces more directly than others, creating opportunities to control growth or removal according to surface orientation.

One example is anisotropic ALE. During a preparatory step, a surface layer is modified. Energetic ions can then remove that modified layer from surfaces aligned with the incoming ion trajectory, while material on sidewalls may remain. For this to be self-limiting, ion energies must be sufficient to remove the modified layer but remain below the sputtering threshold of the underlying bulk material.

Selective deposition can also result from differences in film properties across a 3D structure. Directional species during plasma ALD may affect material forming on horizontal and vertical surfaces differently. A later wet- or dry-etch step can then remove one film region more readily than another. This combination of deposition and selective removal offers a route to a desired pattern when direct area-selective deposition is unavailable.

Process development implications for engineers

These techniques expand the available process options, but they also increase the importance of understanding surface interactions. Process development should distinguish between the roles of radicals and ions and consider how operating conditions affect both film formation and later removal. Relevant questions include:

  • Is the target a conformal film, directional removal or selective treatment by surface orientation?
  • Which plasma species drive the reaction, and what role does substrate bias play?
  • Do films formed on different surfaces have different properties that can support a subsequent selective etch?
  • Can the desired result be maintained across the relevant 3D topography?

Atomic layer etching also has lessons to draw from ALD. Both rely on cyclic, self-limiting chemistry, making process understanding and control of each reaction step central to achieving repeatable results. The approaches are complementary: ALD adds material with fine thickness control, while ALE removes it through controlled surface reactions.

Conclusion: matching process behavior to device geometry

As 3D structures and multi-material stacks become more complex, deposition and etching processes need to do more than coat or remove material uniformly. Atomic layer processing offers a framework for controlling growth and removal cycle by cycle, while plasma conditions and ion energy can provide additional control over material properties and directionality.

For engineers and technical decision-makers, the key implication is that process selection should account for both chemistry and geometry. Understanding how radicals, ions and surface orientation interact can help identify routes to conformal coverage, anisotropic etching or topographically selective results. These capabilities are important tools for addressing the manufacturing challenges of emerging device architectures.

Access Official Technical PDF

About The Author