Access Official Technical PDF

Share Summary:LinkedInEmail

Automotive power packaging is changing as electrified vehicles place greater demands on the size, thermal performance, reliability, and cost of power electronics. The shift is not simply from one package style to another. It involves rethinking how semiconductor dies, interconnects, thermal paths, and passive components are brought together in applications ranging from DC-DC converters to traction inverters.

For engineers and system integrators, the practical question is how package architecture affects current flow, heat removal, manufacturing, and integration. Newer approaches—including power QFN packages, molded system-in-package designs, and embedded-die structures—offer alternatives to conventional large modules, while each application still has its own power and reliability requirements.

Electrification raises the importance of power packaging

Electric and hybrid vehicles use power modules across multiple functions. These include traction inverters, starter-generators, battery chargers, DC-DC converters, and auxiliary systems such as power steering, water pumps, and climate compressors. The power levels vary widely: auxiliary applications may operate from hundreds of watts to several kilowatts, while traction inverters can reach tens or hundreds of kilowatts.

The 2019 whitepaper described a market in which EV and HEV production represented a large share of power-module demand despite accounting for a relatively small share of new vehicle sales at the time. It also cited forecasts for substantial growth in electrified vehicle sales by 2030. Those figures reflect forecasts available at the time, but the underlying engineering challenge remains relevant: scaling power electronics production calls for package solutions suited to automotive volumes, not only to established industrial applications.

Where conventional power modules face limits

Traditional high-power modules were developed for demanding, long-life applications such as trains, wind turbines, power stations, and solar installations. Their construction can include ceramic substrates, large silicon dies, gel filling, plastic housings, lead-containing die attach, vacuum soldering, and a substantial baseplate designed for bottom-side cooling.

This approach can provide a robust solution for its intended operating environment. However, a large, complex bill of materials and singulated processing can make it less suitable for the volume and cost pressures associated with expanding automotive production. Package weight, size, and the electrical effects of wires and leads also matter when designers are working to improve the efficiency and compactness of vehicle power systems.

Automotive power packaging options

Power QFN and flip-chip designs

Power QFN packages provide a leadless option for power devices and can support integration of multiple components. Examples described in the whitepaper include half-bridge and full-bridge arrangements, as well as packages combining high- and low-voltage MOSFETs with control chips. Copper clips, aluminum ribbon, and wettable flanks are among the package features discussed.

Flip-chip QFN designs connect the die through bumps rather than conventional wire bonds. Shorter interconnect paths can reduce resistance in the package path, supporting lower conduction loss and high-current applications. The source also identifies thermal performance, process flow, and options for exposed or overmolded dies as design considerations. These characteristics make package selection a matter of matching electrical and thermal needs to the intended application.

Molded modules and system-in-package

Molded system-in-package approaches place multiple components within a package rather than mounting them separately on a board. The whitepaper describes automotive uPower modules for applications such as DC-DC conversion and smart voltage regulation, with requirements that include handling multiple dies, flip-chip connections, passive components, and a relatively thick mold cavity.

Molding can also protect components and interconnections. The source highlights improved thermal-cycling compliance and vibration immunity compared with an un-molded board assembly, where solder-joint cracking can occur. These benefits are particularly relevant when package construction must withstand automotive operating conditions.

Embedded dies and shorter current paths

Embedding power dies and other components in a substrate can reduce reliance on external leads and wire bonds. This matters because parasitic resistance and inductance in the electrical path influence power loss and switching behavior. As a basic design principle, resistive loss increases with the square of current: reducing resistance in a high-current path can therefore help limit heat generated by conduction losses.

The whitepaper presents aEASI—Advanced Embedded Active System Integration—as a hybrid approach combining leadframe and substrate technologies. Its described features include copper heat-spreading and electrical structures, filled vias to the die, and a low-resistivity die-attach interface. The approach is positioned for power stages and vehicle functions such as climate compressors, electric power steering, start-stop systems, and DC-DC converters, as well as higher-power hybrid and battery-electric vehicle applications.

One example connects a motor directly above a system-in-package with top-side cooling and vertical current flow. The design intent is to shorten the current path and use the motor as an active fan for the power package. For a DC-DC converter example, the whitepaper describes embedded packaging as enabling operation at a higher frequency and reducing the size of inductive and capacitive components in the buck/boost circuit. These are design-specific examples, not universal results for every embedded package.

Thermal design and material choices remain central

Package miniaturization does not remove the need to manage heat. Double-sided cooling is one approach described for improving thermal performance, while custom leadframes, batch processing, and modular assemblies can shape manufacturing and integration choices. The source also discusses smaller SiC and GaN dies, lead-free die-attach methods such as transient liquid phase bonding and silver sintering, and pressure-assisted reflow as elements of evolving power-package designs.

These options should be assessed alongside electrical requirements, thermal paths, assembly processes, and automotive reliability needs. A package that reduces interconnect length may offer electrical advantages, but the complete module still has to support the application’s current, heat-removal, mechanical, and production requirements.

Practical implications for design teams

As vehicle power systems evolve, package architecture becomes an important part of the electrical and mechanical design—not just a final enclosure choice. Engineers evaluating automotive power packaging can usefully compare options by asking:

  • Does the package support the application’s voltage, current, and thermal requirements?
  • How do leads, wires, clips, bumps, or embedded connections affect the current path?
  • Can the design integrate the required power devices, controls, and passive components?
  • Are molding, cooling, and assembly methods compatible with automotive reliability and production needs?

Conventional modules remain relevant for some high-power applications, while leadless, molded, and embedded approaches offer different paths toward integration and compactness. The best choice depends on the system rather than on package novelty alone. For automotive engineers and decision-makers, understanding how interconnects, heat flow, and manufacturing architecture interact is essential to selecting power packaging suited to the vehicle function and its production requirements.

Access Official Technical PDF

About The Author