Automotive semiconductor design is being reshaped by the growing demands of advanced driver-assistance systems (ADAS), connected services and increasingly integrated vehicle electronics. These functions rely on a combination of compute, memory, sensors and communications, while automotive qualification and safety requirements influence how the complete system is designed and validated. Samsung’s 2019 automotive portfolio materials illustrate how these demands were shaping semiconductor platforms and vehicle architectures at the time.
Vehicle architecture is moving toward consolidation
In a distributed vehicle architecture, separate electronic control units (ECUs) handle functions such as audio, navigation, the instrument cluster and powertrain control. Networks may operate independently, with limited communication between functional domains. As features expand, this arrangement can make coordination and integration more complex.
A domain-centralized architecture groups related functions under a domain controller. In the cockpit, for example, infotainment and the cluster can be integrated. This approach depends on a system-on-chip (SoC) that can deliver low-power, high-performance processing, alongside software such as a hypervisor to support multiple operating systems or displays.
The next step described in the 2019 materials is a vehicle-centralized, high-computing platform. A gateway backbone connects vehicle functions, while virtual domains organize workloads on integrated computing hardware. This shifts emphasis toward high-performance SoCs and software architectures designed to be less dependent on specific hardware. For engineering teams, the progression from distributed ECUs to centralized computing affects network design, software partitioning and system integration.
Automotive semiconductor design for ADAS
ADAS development increases demand for processing across camera, sensing and sensor-fusion workloads. The source materials describe a move toward more cameras and higher image resolution, including combinations of wide- and tele-field-of-view cameras for functions such as forward sensing, e-mirrors and blind-spot monitoring. More image data increases the importance of image signal processing (ISP) and available compute capacity.
A scalable SoC strategy can help address differences among vehicle lines and levels of driving assistance. The presented approach ranges from front-camera systems for basic driver-assistance functions to configurations with multiple SoCs for more centralized computing. The design goal is to scale processing resources with the intended functionality, rather than assume every vehicle requires the same hardware configuration.
ADAS requirements also differ by use case. Personal vehicles and mobility-as-a-service fleets may have different cost constraints, operating speeds, sensor sets and control models. The 2019 materials focus on solutions for personal vehicles, while identifying these distinctions as relevant to ADAS and autonomous-driving system design.
Connectivity, memory and sensing work together
Vehicle connectivity has progressed from voice and messaging toward mobile internet and streaming, with 5G adding capabilities such as enhanced mobile broadband, massive IoT and ultra-reliable, low-latency communication. Cellular vehicle-to-everything (C-V2X) is part of this connectivity picture, alongside technologies such as sub-6 GHz and millimeter-wave radio. Vehicle-to-vehicle and vehicle-to-infrastructure communications are among the use cases associated with connected and autonomous systems.
Connectivity is only one part of the platform. Higher-bandwidth memory supports data-intensive applications, while image sensors supply camera systems and processors handle workloads such as computer vision. The materials chart memory technologies including LPDDR generations, UFS and SSD storage in relation to evolving infotainment, connected-car and autonomous-driving needs. The practical design consideration is to balance compute, memory bandwidth, sensor interfaces and communications rather than evaluate each component in isolation.
Safety and qualification shape the design process
Automotive chips must be developed with reliability and functional safety in view. The source describes automotive IP and platform work associated with AEC-Q100 qualification and ISO 26262 processes. These frameworks address different aspects of automotive development: AEC-Q100 concerns component qualification, while ISO 26262 addresses functional safety in road vehicles. The materials identify temperature grades and ASIL targets for particular IP and platform efforts; these should be treated as stated program targets, not as universal properties of every component.
Design practices supporting safety and reliability can include:
- Built-in self-test: Logic BIST and memory BIST check internal structures, with memory test approaches also supporting repair.
- Power-on self-test: A POST controller can coordinate tests at startup and check their results.
- Fault analysis: Fault-injection simulation and soft-error analysis help teams evaluate safety behavior and mitigation strategies, including error-correcting code where appropriate.
- Design-for-test: Boundary scan, IDDQ testing and DFT planning support test access and fault coverage.
- Reliability sign-off: Timing, power and reliability analysis should reflect product specifications and mission profiles.
These mechanisms require planning across architecture, IP selection, verification and post-silicon validation. They are not simply checks added at the end of SoC development.
Power integrity, packaging and manufacturing matter
Fast changes in device activity can cause voltage drops through off-chip inductance, while power-distribution network (PDN) resonance can create additional supply disturbances. System-level PDN optimization therefore considers operating-mode transitions, such as idle-to-active behavior, as well as pre- and post-layout analysis. Early what-if analysis helps establish design targets; later analysis can assess package decoupling capacitor combinations and placement.
Packaging choices also vary with application and automotive temperature grade. The 2019 materials list lead-frame and PBGA options, as well as FCBGA, POP, SIP and MCP packages for selected areas and use cases. Package selection is part of the system design because it relates to the product’s electrical and application requirements.
Likewise, process-node selection must be considered alongside automotive qualification, IP readiness and application needs. Infotainment, ADAS and microcontroller applications do not necessarily share the same processing, nonvolatile-memory or reliability requirements. The manufacturing path is therefore connected to the design platform, IP, test strategy and qualification plan.
Build the platform around the whole vehicle system
The practical lesson for engineering teams is that automotive semiconductor design is a system-level discipline. Centralized architectures can consolidate functions, but they also demand careful compute and software partitioning. ADAS adds sensor-data and processing requirements; connectivity and memory must support the intended workloads; and functional safety, testability, power integrity, packaging and qualification need to be addressed throughout development.
When evaluating an automotive SoC or platform, teams should align the architecture with the vehicle’s functions and operating context, then trace those requirements through IP selection, verification, manufacturing and validation. This integrated approach helps ensure that semiconductor decisions support the needs of the complete vehicle system.