Building automation standards influence how engineers specify controls, integrate HVAC equipment and assess the energy performance of buildings. A 2018 update to Romania’s national standardization programme listed European standards proposed for adoption as Romanian standards, including several with direct relevance to automation and building systems. The programme is a record of proposed adoptions, not confirmation that each item was subsequently adopted or remains current.
For automation engineers, system integrators and facility operators, the list is useful as a map of technical areas to track. It spans building automation and management, individual-zone controls, ventilation and cooling calculations, functional safety, power-drive efficiency, electromagnetic compatibility and information security. Understanding how these topics fit together can help teams identify which standards may matter during design, procurement and system review.
Building automation standards connect controls with energy performance
One of the most relevant entries is EN 15232-1:2017, titled around the impact of building automation, controls and building management on building energy performance. Its subject reflects an important engineering principle: a building’s energy use depends not only on the efficiency of individual equipment, but also on how systems are controlled and managed.
In practice, building automation links sensors, controllers, actuators and supervisory functions across services such as heating, ventilation, air conditioning and lighting. Control strategies determine how equipment responds to demand and operating conditions. A standard focused on the impact of automation and management gives designers and decision-makers a shared framework for considering those relationships in energy-performance work.
The programme also lists EN 15500-1:2017, concerning electronic individual zone control equipment for heating, ventilating and air-conditioning applications. Zone-level control is a distinct layer within a building control architecture: it addresses how an individual area is regulated, while broader building management coordinates systems across the facility. For integrators, that distinction matters when defining equipment requirements, control interfaces and the boundaries between local and supervisory control.
HVAC standards cover calculations, operation and inspection
A substantial group of listed standards concerns ventilation and cooling-system calculations. The EN 16798 series includes material on performance requirements for ventilation and room-conditioning systems, methods for calculating energy requirements, airflow-rate determination and cooling-system generation and storage. Related technical reports explain or interpret requirements in associated documents.
These topics are relevant beyond building-services design. The control system depends on sound assumptions about the equipment and processes it is controlling. Ventilation rates, cooling demand and system configuration affect control sequences, setpoints and the information operators need. Clear calculation methods can help project teams use consistent inputs when coordinating mechanical design and automation functions.
The list also includes EN 16798-17:2017, which addresses guidelines for inspection of ventilation and air-conditioning systems. Inspection is a practical bridge between design intent and operation: it provides a basis for examining system condition and performance rather than treating commissioning as the end of the lifecycle. The related standards and reports are not interchangeable; teams should check the scope of each document before applying it to a project.
Electrical, safety and energy topics matter to automation projects
Several proposed adoptions address equipment and electrical considerations that commonly arise in industrial and building automation. EN 60034-12:2017 concerns the starting performance of single-speed, three-phase cage induction motors. EN 50598-2:2014/A1:2016 addresses energy-efficiency indicators for power-drive systems and motor starters. Together, these subjects touch different parts of a motor-driven application: motor starting characteristics and the efficiency assessment of the drive system.
Electromagnetic compatibility is another practical concern. The programme includes standards on immunity to voltage dips and short interruptions on DC input power ports, as well as electrical fast transient and burst immunity testing. Such requirements are relevant when specifying equipment for environments where electrical disturbances may affect control or measurement devices. The applicable test and equipment requirements depend on the project and product scope.
For safety-related systems, EN 61508-5:2010 is listed as providing examples of methods for determining safety integrity levels. This topic calls for disciplined, documented engineering. A reference to a functional-safety standard in a programme list does not itself establish that a particular system meets a required safety level; project teams must identify applicable requirements and use the appropriate assessment process.
Information security belongs in the standards review
The update lists EN ISO/IEC 27001:2017, covering requirements for information security management systems, and EN ISO/IEC 27002:2017, a code of practice for information security controls. These are organizational information-security standards rather than automation-specific protocols. Their presence is nevertheless relevant to technical decision-makers responsible for connected operational environments, where governance and security controls need to be considered alongside control-system design.
When evaluating these references, teams should distinguish between management-system requirements and the detailed engineering requirements for a control device or network. The standards listed do not, by themselves, specify the architecture or cybersecurity capabilities of a particular automation product.
How to use a standards programme in project planning
A national programme listing proposed adoptions is best treated as a starting point for standards management, not as a substitute for checking the applicable document. Engineers and procurement teams can use it to identify areas that may affect a project, then verify the status, edition, language and scope of the relevant standard through the appropriate national standards body.
- Map standards to systems: Identify which references relate to building management, HVAC controls, motors, drives, safety or information security.
- Check scope and edition: Confirm the precise requirements and publication status before placing a standard in a specification or compliance plan.
- Coordinate disciplines: Bring controls, electrical, mechanical, safety and IT stakeholders into the review where their responsibilities intersect.
- Maintain traceability: Record the standards used in design decisions, procurement documents and system reviews.
Conclusion
The 2018 programme update brings together standards topics that can shape automation projects from equipment selection to building-level control and operational oversight. Its entries on building automation, zone control, ventilation, drive efficiency, functional safety and information security show why standards review should cross traditional engineering boundaries. The practical priority is to verify each document’s current status and applicability, then connect its requirements to clearly defined project responsibilities and design decisions.