Access Official Technical PDF

Share Summary:LinkedInEmail

C-V2X deployment is not simply a matter of installing radios at intersections. It requires a connected ecosystem of vehicles, roadside equipment, communications networks and applications that can address local transportation needs. A 2020 5GAA webinar brought together technology providers, infrastructure operators and automakers to discuss available equipment and deployment activity, including connected-vehicle projects in Georgia and planning considerations for cities.

For industrial automation and transportation professionals, the central lesson is that C-V2X is both a communications technology and an infrastructure program. Its potential depends on choosing suitable applications, coordinating across organizations and building a practical case for investment.

How C-V2X connects road users and infrastructure

Cellular vehicle-to-everything, or C-V2X, enables communication between vehicles and other road users or systems. The categories include vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I), vehicle-to-pedestrian (V2P) and vehicle-to-network (V2N). The intended applications include exchanging information relevant to road safety and traffic efficiency.

The technology uses two complementary communication modes:

  • Direct communication: The PC5 interface supports V2V, V2I and V2P communications. These links can operate in intelligent transportation system (ITS) spectrum, such as the 5.9 GHz band, without relying on a cellular network connection.
  • Network communication: The Uu interface connects devices through mobile broadband networks. It can support longer-range communication, including the distribution of information about an incident ahead.

These modes serve different purposes. Direct links support nearby exchanges among vehicles, infrastructure and road users, while network connectivity can extend communication beyond the immediate area. A deployment may use one or both, depending on its applications and equipment.

C-V2X deployment depends on a growing equipment ecosystem

The webinar described a range of commercial C-V2X components and systems, including chipsets, modules, onboard units (OBUs) and roadside units (RSUs). Product configurations varied: some supported PC5, while automotive platforms could also support cellular network connectivity and positioning capabilities. The presentations also identified aftermarket OBUs, factory-fit telematics control units, dual-radio RSUs and RSU systems combined with cellular infrastructure as examples of equipment categories.

For system integrators and infrastructure owners, the variety of available equipment makes early requirements definition important. Project teams need to establish which communications modes and use cases they intend to support, what roadside and vehicle equipment is required, and how deployments will be monitored and maintained. Availability of components is only one part of readiness; equipment must fit the operational and technical needs of the project.

Georgia projects put connected-vehicle applications into practice

In the Atlanta metropolitan area, local agencies were collaborating on a plan for more than 1,000 contiguous connected-vehicle intersections. The webinar also described C-V2X activity in Marietta and Alpharetta. Marietta’s deployment included connected intersections, emergency vehicles, buses, radar feedback signs, timed school beacons and dynamic message signs.

The applications illustrate how connected infrastructure can extend beyond traffic signal data, often referred to as signal phase and timing (SPaT). Examples presented included:

  • Emergency-vehicle preemption at traffic signals.
  • Transit signal priority for buses.
  • Pedestrian and cyclist collision detection, including pedestrian detection at crosswalks.
  • Smart school zones, work zones and speed zones.
  • Dynamic message sign announcements and remote monitoring and maintenance.

The project also included a public smartphone application intended to support vulnerable road users. This highlights an important design consideration: connected-vehicle systems may need to account for people who are not inside equipped vehicles, including pedestrians and cyclists.

Operations and collaboration shape the business case

The Marietta presentation reported remote monitoring and maintenance across the city’s connected intersections, with the stated aim of reducing the burden on traffic operations staff and keeping equipment under continuous observation. It also reported an average one-minute decrease in emergency response time per call. These outcomes show why deployment evaluation should look beyond the roadside device itself and consider operational processes, service availability and the intended public benefit.

The webinar also framed deployment as a cycle involving societal benefits, a business case for automakers and cities, technical solutions, and funding and buildout. Each element can influence the others. Cities need a reason to invest in infrastructure; vehicle manufacturers need a reason to support compatible services; and both depend on technical solutions and funding arrangements that can make deployment viable.

Potential approaches discussed included building on existing connected services, considering monetizable services such as connected tolling and road-usage charging, and exploring whether roadside installations could align with broader network buildout. These were presented as considerations for developing a business case, not as a single funding model suitable for every project.

Practical priorities for infrastructure owners

For road authorities, plant-style operations teams and system integrators assessing C-V2X, several practical priorities emerge:

  1. Start with defined use cases. Identify whether the initial need is emergency response, transit priority, work-zone awareness, vulnerable road-user support or another application.
  2. Match communications to the application. Determine where direct PC5 communication, network-based Uu connectivity or a combination is appropriate.
  3. Plan for operations. Include remote monitoring and maintenance in the deployment design, rather than treating them as afterthoughts.
  4. Coordinate stakeholders. Vehicle, roadside, communications and public-sector participants need a shared understanding of the technical solution and its intended benefits.
  5. Build a sustainable investment case. Connect the deployment’s public value with realistic infrastructure, service and funding plans.

Conclusion

C-V2X offers a framework for connecting vehicles, road infrastructure, mobile networks and vulnerable road users through complementary communication modes. The Georgia examples demonstrate how deployments can combine intersection equipment with vehicle systems, smartphone applications and ongoing operational support. For decision-makers, the practical task is to align technology choices with specific transportation needs, plan for long-term operations and establish the cross-sector partnerships needed to move from equipment availability to a functioning connected-vehicle network.

Access Official Technical PDF

About The Author