Access Official Technical PDF

Share Summary:LinkedInEmail

Fast-switching power electronics built around wide-bandgap (WBG) semiconductors such as silicon carbide (SiC) and gallium nitride (GaN) put demanding requirements on passive components. Capacitors in these systems may need to handle high ripple current and frequency while maintaining stable electrical behavior near hot power devices. C0G MLCC capacitors, including KEMET’s KC-LINK series, are designed for roles such as DC-link, snubber and resonant capacitors in power converters and inverters.

The design trade-off is not simply capacitance in a small package. Equivalent series resistance (ESR), equivalent series inductance (ESL), temperature capability, mechanical robustness and assembly conditions all affect whether a component fits a particular power-stage design.

Why C0G MLCC capacitors suit fast-switching designs

KC-LINK capacitors use a C0G/NP0 base-metal-electrode dielectric system. The manufacturer specifies no capacitance shift with applied DC voltage and negligible capacitance change with temperature. These properties can help designers maintain predictable capacitance as operating conditions vary, rather than compensating for voltage- or temperature-driven capacitance changes.

Low ESR is relevant where ripple current produces resistive losses and heat. The series is designed for very high ripple-current operation, with very low thermal resistance supporting heat transfer. Its stated operating range is −55°C to +150°C, allowing placement close to fast-switching semiconductors in high-power-density assemblies where cooling is limited. Actual current capability depends on the selected part and operating conditions; engineers should use the applicable part-level performance data rather than treating a series-wide description as a universal rating.

Low ESL is another important consideration in high-frequency power circuits. The component’s mechanical robustness allows mounting without lead frames, supporting a low-inductance surface-mount arrangement. The series is specified for high-frequency operation above 10 MHz. KC-LINK also has no piezoelectric noise, which may be useful in applications where audible noise from capacitor behavior is a concern.

Application roles in power electronics

The listed applications include WBG systems, EV and hybrid-electric-vehicle drive systems and charging, wireless charging, photovoltaic systems, power converters, inverters and LLC resonant converters. Within these architectures, the capacitor’s job depends on its circuit position:

  • DC link: Supports the DC bus in a converter or inverter. Capacitance stability and ripple-current handling are relevant selection factors.
  • Snubber: Used in a switching circuit to manage transient behavior. Low ESL can be important when the capacitor must be integrated close to the switching path.
  • Resonant circuit: Used in designs such as LLC resonant converters, where predictable capacitance across temperature and voltage is beneficial to circuit design.

These functions have different electrical and thermal demands. Select capacitance, rated voltage, case size and operating margin for the specific circuit rather than assuming one capacitor configuration will suit every position.

Selection and integration considerations

Match voltage, capacitance and package

KC-LINK parts are available in EIA 1812, 2220 and 3640 case sizes, with rated-voltage options from 500 V to 2,000 V and a range of capacitance values. The available combinations depend on the case size and part specification. During selection, confirm the exact capacitance, tolerance, voltage rating, thickness and package dimensions in the relevant ordering information and part data.

Performance curves in the product information show typical AC current and voltage behavior across frequency for selected part values and package sizes. These curves are useful for understanding the range of options, but component selection should be based on the curve and conditions for the exact device. The published ripple-current measurements were made at ambient temperature with the capacitor reaching a peak temperature of 150°C; samples were mounted to a heat sink without forced-air cooling. Those test conditions matter when comparing the data with a real assembly.

Account for board mechanics and assembly

MLCCs can be vulnerable to flex cracking caused by mechanical stress on the board. A flexible-termination option is available for EIA 1812 and 2220 sizes, and is intended to improve flex performance compared with standard termination systems. It does not remove the need to consider board layout, mounting and mechanical loading. The manufacturer specifies solder-reflow mounting; consult its land-pattern recommendations and process guidance when designing the PCB and assembly profile.

The recommended reflow profile sets a 260°C peak temperature, a maximum ramp-up rate of 3°C per second and a maximum ramp-down rate of 6°C per second. The components can withstand up to three reflow passes under the specified conditions. Confirm the complete profile requirements against the product documentation and the actual assembly process.

Commercial and automotive-grade options

KC-LINK is offered in commercial and automotive grades. Automotive-grade devices meet the AEC-Q200 qualification requirements described for the series. The manufacturer also describes product-change-notification and Production Part Approval Process provisions associated with its automotive offerings. These processes and the available documentation depend on the ordering option, so automotive program teams should verify the applicable C-Spec and approval requirements with the supplier.

Both grades are identified as lead-free and RoHS and REACH compliant without exemptions. As with any component choice, qualification status does not replace application-specific design review, validation or appropriate safeguards where system reliability and safety requirements demand them.

Practical implications for power-system teams

C0G MLCC capacitors can be a useful option when a fast-switching design needs stable capacitance, low ESR and ESL, and operation at temperatures up to 150°C. Their potential fit spans DC-link, snubber and resonant positions, but the right choice depends on electrical stress, thermal conditions, physical placement and board mechanics.

For design and integration teams, the practical approach is to match the exact part to its circuit role, review part-specific performance curves and ratings, and account for reflow and mechanical constraints early in the PCB design. That discipline helps ensure the capacitor’s stated characteristics translate appropriately into the intended power-electronics application.

Access Official Technical PDF

About The Author