Carbon capture, utilization, and storage (CCUS) is a set of processes for separating carbon dioxide (CO2) from industrial or power-generation gas streams, converting it into useful or stable products, and storing it to prevent its return to the atmosphere. For industrial operators, the challenge is not simply capturing CO2: the entire chain must work together, from separation and purification through transport, utilization or injection, and long-term monitoring.
Established CCUS technologies have been deployed at industrial scale, but wider application depends on improving performance, lowering costs, and building confidence in project operation. A broad research agenda identified by an international experts’ workshop offers a useful framework for understanding where innovation is needed—and why the issues span process engineering, materials science, measurement, and decision-making.
Why industrial carbon capture requires more innovation
Power generation is one source of CO2 emissions, but energy-intensive industries present distinct challenges. Cement, steel, chemicals, and other manufacturing processes may release CO2 both through fuel use and as part of production itself. That means emissions may remain even as energy supplies change. CCUS is therefore considered an important option for reducing emissions from industrial sources where alternatives may be limited.
Capture systems must separate CO2 from complex gas streams while managing selectivity, capacity, material durability, energy use, equipment footprint, and overall process cost. The best solution depends on the application and the gas stream; there is no single separation technology suited to every facility.
Capture technologies: different routes, shared engineering challenges
Capture is commonly organized into three process configurations:
- Post-combustion capture separates CO2 from exhaust after fuel is burned.
- Oxy-combustion uses relatively pure oxygen for combustion, producing an exhaust stream that can facilitate CO2 capture.
- Pre-combustion capture converts a fossil feedstock into a mixture that includes CO2 and hydrogen, then separates the gases before combustion.
Within these configurations, capture may rely on solvents, solid sorbents, membranes, or other separation approaches. Research priorities include designing higher-performing solvents and environmentally considerate solvent processes; developing sorbents tailored to specific duties; and integrating sorbent materials with process equipment. For membranes, priorities include understanding how gases move through membrane materials and designing system architectures that make effective use of them.
These are not purely materials-development questions. Plant-level performance depends on how materials interact with operating conditions and how the separation step is integrated with utilities and supporting systems. The workshop also identified combustion improvements and hydrogen production from fossil fuels with CO2 capture as research areas.
CO2 utilization: turning a captured stream into a product
Utilization aims to convert captured CO2 into products such as fuels, chemicals, and materials. Research directions include catalytic and thermochemical conversion, electrochemical and photochemical processes, and biological or bioinspired approaches. Hybrid systems that combine electrochemical and biological processes were also identified as an area for investigation.
Another pathway is carbon mineralization, which converts CO2 into solid carbonate products. These processes connect utilization with durable storage in materials. A key research challenge is understanding the reactions at solid–liquid interfaces and how material properties affect the formation and potential use of carbonate products.
For industrial decision-makers, utilization is not automatically a destination for every captured stream. Its relevance depends on the conversion route, the resulting product, and how the process fits into a facility or broader industrial system. The research agenda emphasizes improving the scientific understanding needed to develop and assess these routes rather than assuming one universal solution.
Geological storage: capacity, monitoring, and well integrity
When CO2 is stored underground, project design must account for how fluids move through geological formations, how much CO2 can be injected, and how pressure changes over time. Research priorities include improving understanding of multiphysics and multiscale fluid flow, establishing dynamic pressure limits, and optimizing the near-well environment to support injection.
Monitoring is central to demonstrating containment and assessing storage-site performance. The workshop highlighted smarter monitoring approaches for identifying anomalies and providing assurance, alongside improved characterization of faults and fractures. It also identified induced seismicity forecasting as an important area for development.
Well integrity deserves particular attention. Existing and abandoned wells may require locating, evaluation, and remediation, while new projects need ways to establish and assess integrity over time. Together, these priorities show that storage planning is not limited to selecting an injection site: it includes ongoing assessment of the subsurface and the infrastructure connecting the surface to the storage formation.
Crosscutting priorities for CCUS projects
Several needs apply across capture, utilization, and storage. One is closer integration of experiments, simulations, and machine learning across different length scales to guide materials discovery and process development. Another is stronger collaboration between basic science and engineering, so that fundamental findings can inform process design and operational decisions.
Assessment also needs to extend beyond individual equipment performance. The workshop called for tools that bring together technoeconomic, environmental, and social considerations over a technology’s life cycle. This can help decision-makers compare technology portfolios and understand trade-offs rather than evaluating a capture unit, conversion step, or storage site in isolation.
For automation and operations teams, the emphasis on sensors, characterization, and smart monitoring points to the importance of dependable information across the CCUS chain. Monitoring is part of the project’s assurance framework: it supports assessment of storage performance, detection of anomalies, and decisions about containment. The specific monitoring approach must be developed for the process and site rather than assumed to be identical everywhere.
Conclusion: plan for the whole carbon-management chain
The practical implication of the CCUS research agenda is that emissions reduction depends on integrating multiple technical stages. Better capture materials alone are not enough if the process is costly or difficult to integrate; conversion routes must be assessed on their merits; and geological storage requires attention to injection, monitoring, seismic risk, and well integrity.
Industrial organizations evaluating CCUS can use these priorities to structure technical discussions: define the source and capture configuration, consider the full route for the CO2 stream, and account for measurement, safety, economics, environmental effects, and long-term storage performance. Coordinated progress across these areas is essential to making carbon capture, utilization, and storage more efficient, reliable, and applicable to industrial emissions.