Access Official Technical PDF

Share Summary:LinkedInEmail

CO2 gas purification is a key consideration wherever semiconductor processes depend on clean, consistent carbon dioxide at the point of use. In photolithography, wet etch, and cleaning applications, contaminants in process gas can affect the quality and reliability of downstream operations. The GateKeeper Gas Purification System DZ series is designed to supply purified CO2 at high flow rates, with a compact, floor-mounted configuration intended for semiconductor fabrication environments.

For engineers and facility teams evaluating a point-of-use purifier, the relevant questions extend beyond outlet purity. Flow capacity, pressure drop, regeneration, utilities, alarms, and service access all affect how a system fits into a fab. The DZ series combines ambient-temperature purification with self-regenerating purifier beds and provisions for facility monitoring and maintenance.

CO2 gas purification for semiconductor applications

The DZ series is designed to purify carbon dioxide for scanner platforms, including immersion lithography tools, as well as other applications that require purified CO2. The system targets several contaminant classes: volatile acids and bases, refractory compounds, condensable and non-condensable organics, sulfur compounds, oxygen, and moisture.

Product specifications report outlet levels below 1 part per trillion (ppt) for volatile acids measured as SO2, refractory compounds measured as HMDSO, non-condensable organics measured as toluene, condensable organics measured as decane, and sulfur compounds including H2S, COS, and CS2. The specified limit for volatile bases measured as NH3 is below 5 ppt, while oxygen is below 500 ppt and moisture is below 1 part per billion (ppb). These figures describe stated performance for the listed contaminants and measurement references; process teams should assess them against their application requirements.

Purification without process heating

The system uses inorganic purification media and operates at ambient temperature. Because heating is not required for purification, the design avoids the energy use associated with heating the gas for this function. The manufacturer presents this approach as a means of conserving resources and reducing energy costs.

Self-regenerating purifier beds are another element of the system design. Regeneration restores purifier media for continued service; each purifier bed has a specified regeneration duration of less than 24 hours. The system’s power-failure feature is also intended to prevent a power interruption from damaging the purification system. Facilities should review their required gas supply strategy and selected system configuration rather than assume a particular backup arrangement.

Flow, pressure, and model selection

The four models cover maximum flow rates from 20 to 60 Nm3/hr, equivalent to 311 to 932 standard liters per minute in the product specifications. The GPS20DZ and GPS30DZ are specified for up to 20 and 30 Nm3/hr, respectively; the GPS50DZ and GPS60DZ cover up to 50 and 60 Nm3/hr. Selection should be based on the required process flow and operating conditions.

The specified operating pressure range is 5.51–17.23 bar (80–250 psig). Pressure drop is less than 15 psi at 100 psig and maximum rated flow. Low pressure drop can help avoid changes to inlet pressure, but system designers should verify pressure conditions at the intended operating flow and account for the wider gas distribution system.

Operating gas temperature is specified at 15–40°C (60–104°F). Outlet filtration is listed as ISO Class 1, with fewer than 10 particles per cubic meter at 0.1 μm and fewer than two particles per cubic meter at 0.2 μm. These parameters can help teams compare the unit with process and facility requirements.

Facility integration and operational visibility

The purifier is an indoor, floor-mounted enclosure with integrated casters and leveling feet, plus seismic restraint brackets for securing it to the floor. A front door provides access to serviceable components. The recommended maintenance clearance is three feet in front of the system, a practical consideration when planning the equipment layout.

Facility connections vary by model size. GPS20DZ and GPS30DZ use 1/2-inch process gas inlet and outlet tube stubs; GPS50DZ and GPS60DZ use 3/4-inch stubs. The unit requires a 4-inch ventilation duct with a specified exhaust flow of 50 cfm. Other connections include a regeneration gas outlet, a customer-supplied nitrogen regeneration line, and instrument air supplied by CDA or nitrogen at 6.21–10.34 bar (90–150 psig).

Electrical requirements are listed as 200–240 VAC, single phase, with power consumption of 100 W while idle and online and 500 W during regeneration. A 400 V input option is available. Installation must also meet applicable local building codes, and the stated environmental conditions are 15–40°C indoors and 10–90% relative humidity, noncondensing.

Safety, alarms, and maintenance planning

Operational safeguards include an earth leakage circuit breaker, temperature monitoring by thermocouple, and a high-temperature hardware interlock. The emergency machine-off (EMO) function removes power from the main enclosure and shuts off process gas flow; the front panel and controller remain powered. A remote EMO input can support connection to an external facility device.

Visual and audible alarms indicate alarm conditions. Remote alarm outputs can notify external sensing equipment of a minor alarm or an EMO shutdown. An Ethernet connection supports Modbus TCP/IP and browser-based remote access, providing a way to view system information remotely. The control and monitoring approach should be reviewed alongside site alarm-management and network practices.

Options include passive backup configurations, automatic bypass valves, inlet and outlet pressure transducers, a moisture indicator, and a process gas mass flow meter with totalizer. The appropriate options depend on the facility’s operating requirements and chosen system arrangement.

Conclusion: evaluate the complete gas delivery requirement

The GateKeeper DZ series combines high-flow CO2 purification, specified ppt-level limits for several contaminants, ambient-temperature operation, self-regenerating media, and facility monitoring features. For a successful installation, engineering teams should match model capacity to process demand and verify pressure, utilities, ventilation, maintenance clearance, alarm interfaces, and backup requirements. Evaluating these factors together helps determine whether a point-of-use purifier is suited to the process and the fab’s operating practices.

Access Official Technical PDF

About The Author