Access Official Technical PDF

Share Summary:LinkedInEmail

For decades, Moore’s Law provided a predictable path to greater computing performance and functionality at roughly similar cost, power and area. But as transistor dimensions approach physical limits and semiconductor manufacturing becomes more challenging, computing beyond Moore’s Law will depend less on routine lithographic scaling and more on how systems are designed, connected and programmed. For industrial automation, this shift matters wherever control, analytics, simulation and artificial intelligence rely on continuing gains in computing capability.

The transition is not a single replacement technology. It is a combination of near-term architectural changes and longer-term research into new materials, devices and models of computation. In the meantime, engineers and technical decision-makers must account for more varied hardware and the growing cost of moving data between computing resources.

Why Moore’s Law no longer guarantees performance growth

Moore’s Law describes a techno-economic trend: the industry historically increased the number and functionality of transistors on a chip while maintaining a favorable balance of cost, power and area. That progress supported general-purpose processors and a mature software ecosystem, including compilers, development tools and widely used instruction set architectures.

Continued miniaturization is becoming harder as critical device features approach atomic scales. At the same time, the end of Dennard scaling has weakened the assumption that smaller transistors automatically deliver proportionate power benefits. Clock-frequency gains have also tapered, and adding processor cores does not by itself guarantee faster execution. The result is that conventional scaling can no longer be treated as a dependable, automatic source of performance improvement.

There are two time horizons for responding. In the near term, existing CMOS technology can be used more effectively through new architectures and advanced packaging. Over the longer term, progress may require new materials, device physics and computing approaches. Developing a new device and bringing it into mainstream manufacturing can take many years, so research and system-level evaluation need to proceed well before existing technologies reach their limits.

Architectural specialization becomes a practical path

When general-purpose processors deliver fewer automatic gains, one practical option is to tailor computing hardware to particular workloads. Accelerators can perform selected tasks more efficiently than a processor designed to handle a broad range of applications. This approach is already visible in systems that combine CPUs, GPUs, machine-learning accelerators and other specialized components.

Specialization can support performance or energy-efficiency improvements, but it also changes the engineering trade-offs. A fixed-function accelerator may deliver benefits for a well-defined workload, yet become less useful if algorithms or application needs change. Reconfigurable devices offer some flexibility, though developing effective hardware and programming it can be difficult. Custom hardware also involves development costs and lead times that may be hard to justify for smaller or changing workloads.

Three broad strategies help organize the options:

  • Hardware-driven algorithm design: adapt algorithms to make effective use of available accelerators.
  • Algorithm-driven hardware design: build specialized hardware around the requirements of a particular application or computational method.
  • Hardware-software co-design: develop algorithms, software and hardware together, allowing choices in each layer to inform the others.

These strategies are relevant to industrial systems that combine control, inspection, optimization or analytics workloads. The key is to identify the computational tasks that justify specialization rather than assuming that every function benefits from the same processor architecture.

Heterogeneous computing raises software demands

Future systems are likely to contain a broader mix of processor and accelerator types. That heterogeneity can make it possible to match different operations to suitable hardware, but it complicates application development. Existing algorithms may need redesign, and software must coordinate work across components with different capabilities and data-access characteristics.

Programming models and tools can reduce the effort required to use diverse hardware, but they cannot remove the need to reconsider algorithms. A system that performs well on one architecture may not map efficiently to another. Performance portability—the ability to maintain useful performance across different hardware platforms—therefore requires careful attention to both software abstractions and the information available to compilers and runtimes.

Domain-specific languages and higher-level descriptions of computational tasks may give compilers more flexibility to map work onto different architectures. Numerical libraries and application frameworks can also help make optimized methods available beyond a single implementation. For complex workloads, collaboration among application developers, applied mathematicians, software engineers and hardware designers is essential.

Data movement is a central performance constraint

More computing capacity does not necessarily produce better application performance. Moving data can consume more energy than performing an operation on it, particularly when information must travel across a chip or between system components. Unlike transistor efficiency, the energy cost of electrical wires has not improved at the same pace as lithographic scaling.

This makes data locality, memory hierarchy and communication bandwidth increasingly important. A processor may have substantial compute resources, but those resources can be underused if data cannot reach them quickly enough. Distance-dependent access costs and bandwidth contention also create non-uniform memory access (NUMA) effects, both within nodes and across larger systems.

For software teams, this shifts attention beyond counting floating-point operations. Algorithms that reduce communication, reuse data locally or increase useful computation per data transfer can be valuable. Hardware architecture, memory placement and communication topology also need to be considered as part of algorithm design, rather than treated as implementation details.

Advanced packaging and photonics address connectivity

Advanced packaging offers ways to combine computing, memory and specialized components more closely. Three-dimensional integration can extend designs vertically, while chiplet approaches assemble separate functional tiles into a package. These approaches can support more diverse systems without requiring every function to be integrated into one large piece of silicon.

Photonic interconnects are another area of development, particularly for communication between components in data-centre environments. They are being explored for their potential to provide high bandwidth density and energy efficiency. However, replacing an electrical link with an optical one is not enough on its own to ensure system-wide gains; the architecture must be designed to take advantage of the technology.

Related data-centre concepts include rack disaggregation, in which computing, memory and other resources can be allocated more flexibly across a rack. This approach depends on interconnects capable of supporting effective resource sharing. The broader lesson is that packaging and communication design are becoming integral to computing performance, not merely ways to connect finished chips.

Conclusion: plan for co-design, not automatic scaling

Computing beyond Moore’s Law is likely to be a gradual shift rather than a direct transition to one successor technology. In the near term, architectural specialization and advanced packaging offer ways to use existing technologies more effectively. Longer-term progress depends on research into new devices and materials, supported by evaluation that connects device-level properties to system and application outcomes.

For industrial automation leaders, the practical implication is to assess workloads, algorithms, data movement and software readiness together when planning computing platforms. Heterogeneous systems may offer useful options, but realizing their value requires application-aware hardware choices and sustained hardware-software co-design. As conventional scaling slows, performance will increasingly depend on how well the complete system is matched to the work it must perform.

Access Official Technical PDF

About The Author