Access Official Technical PDF

Share Summary:LinkedInEmail

Copper metallization delayering is a layer-by-layer inspection process used in semiconductor failure analysis. By progressively exposing structures within a die, engineers can examine the metal layers, contacts, polysilicon, and substrate for physical evidence associated with a failure. The method depends on first identifying the area of interest and understanding the die’s layer structure, so that inspection can be directed at the relevant features.

Start with failure localization and layer structure

Before material is removed, the analysis team needs to determine where to inspect. Localization techniques can identify a region associated with a failure. The methods described for this work include emission analysis, hot-spot localization, OBIRCH, and, in some cases, optical inspection. The selected area then provides a target for the subsequent physical examination.

Knowing the die’s layer structure helps determine how to approach delayering. That structure may already be documented. If it is not, a mechanical cross-section or a Dual Beam FIB cross-section can be used to reveal the arrangement directly. Establishing the structure before proceeding is important because the sequence involves exposing and inspecting different levels of the device.

How copper metallization delayering proceeds

Once the area of interest is established, the intact chip is first inspected with optical microscopy. This initial view records the condition of the die before the layers are removed and provides a reference for later observations.

The passivation, described as glass in the process, is then removed to expose the next metal layer. The newly exposed surface can be inspected optically or with a scanning electron microscope (SEM). The same general approach is applied as the analysis moves through the metal levels and, where relevant, to polysilicon and the substrate.

Inspection is not limited to a single magnification. If an initial examination reveals a possible defect, higher-magnification images can be taken to evaluate that feature more closely. This staged approach connects broad inspection of each exposed layer with more detailed examination where an observation warrants it.

Why the sequence matters

Delayering is a controlled progression through structures that would otherwise remain covered by overlying material. Recording the intact die first, then inspecting newly exposed surfaces, helps keep observations associated with the layer being examined. The need to know the structure in advance—or to establish it with a cross-section—also helps the analysis focus on the correct level rather than treating the die as a single undifferentiated surface.

Defects to look for at each level

The potential findings vary by layer. Matching observations to the structure being inspected helps organize the analysis and guides decisions about whether closer imaging is needed.

  • Copper layer: Typical defects include EOS (melting metal), metal shorts, electromigration, and missing vias.
  • Contact: Passive voltage contrast (PVC) may show leakage or a short. Missing contacts are also among the defects to check.
  • Polysilicon: Possible findings include a poly short, a tungsten short, missing poly, or missing silicide.
  • Substrate: Defects can include ESD damage, melted silicon, a diffusion short, contact spiking, or a gate-oxide defect.

These categories provide a practical inspection checklist, not a diagnosis by themselves. For example, an observation such as a short or missing feature must be considered in relation to the exposed layer and the area selected during localization. The layer-by-layer workflow supplies that structural context for the findings.

Using inspection results to guide failure analysis

Optical microscopy and SEM provide complementary ways to examine exposed surfaces within this workflow. Optical inspection is used on the intact chip and can also be used after a layer is exposed. SEM inspection is another option for examining the exposed metal levels. When an indication is found, higher-magnification imaging can help document its appearance.

The process is therefore both sequential and targeted: localization identifies where to look, structural knowledge establishes what lies beneath the surface, and delayering makes those structures accessible for inspection. Keeping those steps connected can help engineers interpret whether an observed feature belongs to the copper, contact, polysilicon, or substrate level.

Practical implications

For failure-analysis engineers and technical decision-makers, copper metallization delayering is most useful when treated as a planned investigation rather than simply a removal operation. Begin with a defined area of interest, establish the layer structure, document the intact die, and inspect each exposed level using optical microscopy or SEM. Escalate to higher magnification when a potential defect is observed.

This disciplined sequence supports more focused examination of semiconductor die defects, from metal-layer issues such as electromigration or missing vias to substrate findings such as ESD damage or gate-oxide defects. The practical value lies in relating each observation to the correct layer and to the failure location, creating a clearer basis for continued analysis.

Access Official Technical PDF

About The Author