D-band wireless backhaul is a potential way to provide high-capacity connectivity across dense networks where fiber is difficult to deploy or where short wireless links can complement existing infrastructure. The 130–174.8 GHz range offers substantial spectrum for fixed-service applications, but its use depends on more than available bandwidth: link distance, rain, line of sight, equipment maturity and spectrum arrangements all affect deployment planning.
An ETSI Industry Specification Group report published in 2018 examined D-band alongside the W-band, outlining possible network scenarios, spectrum approaches and early prototypes. Its analysis is useful for understanding both the opportunity and the practical constraints of very-high-frequency radio links.
D-band spectrum and the capacity opportunity
The D-band is part of the spectrum above 90 GHz being considered for high-speed wireless transmission. The report identifies several allocated D-band ranges, including 130–134 GHz, 141–148.5 GHz, 151.5–164 GHz and 167–174.8 GHz. Together, these ranges provide more than 30 GHz of spectrum for potential fixed wireless applications.
Wide channels can support high data rates, while compact antennas make the technology relevant to dense urban installations. Potential uses include mobile backhaul and fronthaul, fixed wireless access, and short links between network locations. The report also considered demanding future requirements, such as capacities above 10 Gbps and, for some server connections, a target of 40 Gbps. These are prospective requirements, not a claim that every D-band link can deliver those rates.
Where D-band wireless backhaul may fit
D-band is most naturally suited to short, high-capacity links in fixed-service networks. One example is a mobile backhaul tail link: the report lists a potential requirement above 10 Gbps over distances below 200 metres. Other scenarios include connections in small-cell access networks and links between rooftops and street-level sites.
Indoor data-centre inter-server connectivity is another considered application. The report describes existing optical-fiber links for this purpose and notes the possibility of using high-frequency radio over distances of several tens of metres. That makes D-band a potential wireless option to assess, rather than a general replacement for fiber.
Network planners should also consider D-band as one part of a broader transport design. The report anticipates that fiber, microwave, millimeter-wave links and self-backhaul may be combined to reach radio sites and meet service requirements. Band and carrier aggregation may also help where a single link cannot provide the required combination of distance and capacity.
D-band propagation and link-planning constraints
Very wide bandwidth does not remove the need for careful link engineering. The report’s distance simulations assumed line-of-sight paths and did not include urban environmental effects. They evaluated different channel widths, rain rates, antenna gains and availability conditions. As a result, simulated reach should be treated as scenario-dependent, not as a guaranteed distance for a real installation.
Rain attenuation in the D-band was described as relatively flat across the band and around 2 dB higher than in the E-band. Atmospheric gas attenuation was estimated at 1–2 dB per kilometre and was not considered the dominant factor limiting link distance in the modeled cases. Real link budgets still need to account for the intended availability, local rain conditions, path length, antenna gain and system performance.
There was an additional modeling limitation: the cited ITU-R propagation model was considered valid up to 100 GHz, below the D-band frequencies. The report therefore highlighted the value of field measurements to assess propagation behavior above that range. Early trial observations showed correlation between measured link behavior and atmospheric conditions, but the report noted that a statistically meaningful evaluation would require at least a year of measurements.
Equipment architecture and early prototypes
Early D-band prototypes demonstrated several design approaches. One prototype described in the report used separate transmit and receive antennas rather than a duplexer. This duplexer-free arrangement can inform channel planning, but it depends on sufficient isolation between the antennas and should not be assumed to suit every radio design.
Reported prototype results included error-free transmission at 1 Gbps over a 750 MHz channel using QPSK, and up to 7 Gbps over a 1,600 MHz channel using 32-QAM in laboratory testing. A separate field-trial link operated over 90 metres with a 500 MHz channel. During a reported rainfall event of about 50 mm/h, the trial’s QPSK transmission at 750 MHz remained error-free. These results describe specific early equipment and trial conditions; they are not universal performance guarantees.
At these frequencies, careful integration of radio-frequency components and antennas matters. The report’s prototype findings also underline the importance of controlling module design and assembly: measured receiver sensitivity can be affected by implementation penalties. For integrators, this reinforces the need to evaluate complete equipment performance, not just nominal channel bandwidth or component specifications.
Spectrum coordination and deployment decisions
In the 2018 report, standardized channel plans and licensing approaches for the W- and D-bands were still under development. Channel arrangements and spectrum access therefore formed part of the deployment challenge, alongside technical design. Operators and system designers need to verify the applicable national rules and current channel plans rather than rely on a historical proposal.
Before selecting D-band for a project, assess whether the route can maintain line of sight, the required capacity and availability, local weather exposure, antenna placement and the role of other transport technologies. Also distinguish service-level availability from the contribution of an individual radio link: resilience may depend on combining wireless with fiber or other network paths.
Conclusion
D-band wireless backhaul offers a substantial spectrum resource for short, high-capacity fixed links, particularly in dense network segments. Its practical value depends on realistic propagation analysis, suitable radio and antenna integration, spectrum authorization and a transport design that accounts for availability as well as throughput. Treating D-band as a targeted component of a mixed network—rather than a universal substitute for fiber or lower-frequency links—provides a sound basis for evaluating where it can serve industrial and communications infrastructure needs.