Access Official Technical PDF

Share Summary:LinkedInEmail

DCM radar is a digitally modulated approach to automotive sensing that uses coded phase changes to identify reflected signals. As vehicles add radar sensors and driving automation places greater demands on detection, engineers must consider more than nominal range or resolution. The ability to distinguish a small object beside a large one, estimate motion and direction, and operate amid other radars also matters. Digital Code Modulation (DCM) addresses these challenges differently from the widely used Frequency Modulated Continuous Wave (FMCW) approach.

Why automotive radar performance is changing

Automotive radar supports Advanced Driver Assistance Systems (ADAS) and automated driving by measuring an object’s range, radial velocity and direction. Unlike cameras, radar can operate in conditions that impair vision, including fog, snow and heavy rain. It also measures Doppler shift, which provides information about the relative speed of moving objects.

Vehicles may use long-, mid- and short-range radar for different coverage needs. As the number of sensors and automation functions grows, radar systems must provide useful measurements across range, velocity and angle while limiting ambiguity and interference. A system may need to detect a small road hazard near a larger vehicle or separate a cyclist from nearby traffic—situations where conventional resolution measures alone may not describe performance adequately.

How FMCW and DCM radar process returns

FMCW: measuring frequency differences

FMCW radar transmits a continuous signal whose frequency changes over time, usually as a repeating linear sweep, or chirp. A reflected signal arrives later than the transmitted signal. The receiver mixes the return with a reference derived from the transmitted waveform, producing a beat frequency related to the signal’s delay and therefore the target’s range. Digital processing, including a Fast Fourier Transform (FFT), identifies frequency components associated with targets.

For FMCW radar, range resolution depends on the transmitted signal’s bandwidth: greater bandwidth allows targets with a smaller range separation to be distinguished. The chirp duration, bandwidth, receiver filtering and sampling also affect the system’s operating range and unambiguous measurements.

DCM: correlating a coded waveform

DCM radar varies the phase of a carrier according to a digital spreading code. Each code element, or chip, holds a phase value for a defined interval. The receiver compares the return against delayed versions of the transmitted code using a matched filter or correlators. A strong correlation peak indicates a likely target delay, which can be converted to range.

The code’s chip rate is linked to signal bandwidth, so DCM and FMCW share the fundamental relationship between bandwidth and range resolution. DCM’s distinguishing feature is its correlation-based range response: codes with suitable autocorrelation properties can produce a narrow, sharp peak rather than the broader response associated with FFT-based range processing. The selected code and whether it repeats affect sidelobes and maximum unambiguous range. With a periodic code, a return beyond the code’s unambiguous range can appear at a nearer range; a longer code period can extend that range.

High contrast resolution: seeing small targets near large ones

Traditional resolution describes whether two targets can be separated when their reflected signal strengths are comparable. Automotive scenes often include targets with very different radar cross sections (RCS). A small object near a large, strongly reflecting one may be difficult to distinguish even when nominal resolution appears adequate.

High Contrast Resolution (HCR) describes a radar’s ability to resolve targets with different reflectivities in close proximity, across dimensions such as range or angle. The sharp correlation response associated with DCM can help limit the influence of a strong target on nearby weaker returns. HCR is therefore a useful complement to conventional resolution when assessing applications such as detecting a pedestrian beside a barrier or a small object in front of a truck.

MIMO, angle estimation and digital processing

Multiple-input, multiple-output (MIMO) radar combines signals from transmitting and receiving antennas to create virtual receiver channels. These channels provide spatial information used to estimate target angles; a larger effective aperture can support finer angular resolution. The number and arrangement of antennas, along with the processing method, shape the resulting field of view and angular performance.

DCM naturally supports code division multiplexing (CDM) for MIMO: multiple transmit antennas can operate at the same time using different spreading codes, which receivers separate through code-matched processing. This differs from time division multiplexing, where transmit antennas take turns. Simultaneous coded transmission can avoid the scan-time and unambiguous-velocity trade-offs associated with sequential transmission, although code selection involves balancing separation between transmit channels against each code’s autocorrelation properties.

Interference robustness as a design consideration

Interference can come from another radar on the same vehicle or from a nearby vehicle. It is challenging because a direct radar-to-radar signal undergoes one-way propagation loss, while a target echo experiences a round trip. As radar deployment grows, interference can raise the receiver’s effective noise floor and degrade target detection.

The effect depends on the transmitting and receiving waveforms, their timing and signal processing. FMCW interference characteristics can vary with the relative chirp slopes and timing of the interfering and victim radars. DCM systems are described as robust to interference from other DCM radars, while interference between different modulation types depends on their interaction. Interference Susceptibility Factor (ISF) provides a way to characterize this vulnerability; it should be considered alongside HCR, coverage, accuracy and resolution when evaluating a radar for a particular operating environment.

Practical implications for radar selection

DCM does not change the basic radar task: transmit a signal, receive its reflections and estimate target properties. It changes how the signal is encoded and processed. For system designers and integrators, the relevant comparison with FMCW includes:

  • Range response: correlation peaks and code properties affect separation of nearby targets and sidelobe behavior.
  • Unambiguous measurements: code period, sampling and waveform timing influence range and velocity ambiguity.
  • MIMO architecture: simultaneous coded transmitters can support a different balance of scan time and velocity coverage than time-multiplexed transmission.
  • Interference environment: likely radar coexistence and the modulation schemes in use affect system resilience.

For automotive automation, radar performance is not captured by a single resolution figure. DCM offers a digital alternative to FMCW with a sharp correlation-based range response, native coded MIMO support and different interference characteristics. Engineers should assess these features against application needs—including high-contrast targets, angular coverage, unambiguous range and velocity, and radar coexistence—when choosing or integrating sensing systems.

Access Official Technical PDF

About The Author