Access Official Technical PDF

Share Summary:LinkedInEmail

Reliable document printing supports many everyday tasks in industrial and business environments, from producing work instructions to printing shipping paperwork. The Dell B1160 printer family provides compact monochrome laser printing, with USB connectivity on both models and wireless networking on the B1160w. Getting dependable results depends on more than installing a driver: correct media selection, careful loading and routine maintenance all help prevent avoidable interruptions.

This guide covers practical setup and operating considerations for the Dell B1160 and B1160w. Feature availability can vary by model and country, so confirm the configuration of the specific machine before planning how it will be connected or used.

Dell B1160 printer setup and connectivity

The B1160 connects to a computer through USB. The B1160w also supports 802.11b/g/n wireless networking and Wi-Fi Protected Setup (WPS). Its wireless configuration can be initiated using the WPS button and a compatible access point, or configured using a USB cable. The B1160w also supports Wi-Fi Direct for printing from mobile devices.

For a local USB installation, connect and power on the printer, then install the appropriate driver. The supplied software includes printer drivers and management tools; current drivers and support information are available through Dell support. When using a USB cable, the guide specifies a maximum length of three metres. The models support Windows, Macintosh and Linux, although installation steps differ by operating system.

After installation, print a test page to confirm that the computer can communicate with the printer and that the basic print path is working. If printing later fails, check the print queue, confirm that the correct printer is selected, and consider repairing or reinstalling the driver if it is not functioning properly.

Paper handling and media selection

Paper feed problems and print defects can often be reduced by matching the media settings to the stock in the tray. The printer supports a range of media, including plain, thick and thin paper, labels, envelopes, card stock, recycled paper and preprinted sheets. The supported sizes and weights vary by media type, so use the printer’s media specifications when selecting stock.

Before loading paper, adjust the tray to the required size and fan the stack to separate sheets. Set the width guide against the stack without bending or warping the paper. Incorrect guide positioning can contribute to skewed printing or jams. In the print driver, select the appropriate paper size, type and source; driver settings can override settings made elsewhere.

The manual feed option is intended for special or less common media. Feed one sheet at a time, centred, with the printable side facing up and the top edge entering first. When the driver is set to use the manual feeder, the printer may require the Info or WPS button to be pressed for each page. Wake the printer from power-save mode before using the manual feeder.

Take extra care with envelopes and labels

Envelopes should be flat, undamaged and within the supported weight range. Avoid envelopes with clasps, windows, exposed adhesive or other features that may interfere with feeding. For labels, use stock designed for laser printers, with no exposed adhesive or peeling edges. A label sheet should pass through the printer only once; loose labels or exposed adhesive can cause jams and damage internal components.

Preprinted paper should be dry before loading, and its ink must be suitable for the heat involved in the printer’s fusing process. If printing on a custom paper size, configure that size in the driver rather than relying on a standard-size setting.

Maintaining toner and print quality

Light output, white streaks or uneven density can indicate that toner is running low or distributed unevenly. When the cartridge is near the end of its life, redistributing the remaining toner may temporarily improve print quality. It is not a replacement for a new cartridge when the supply is depleted, and the printer stops printing when the cartridge reaches end of life.

Handle cartridges carefully. Avoid touching the photoconductive drum, exposing the cartridge to unnecessary light or shock, and manually rotating the drum. Store an unused cartridge in its original packaging in a stable environment, away from direct light, dust and extreme temperature or humidity. Toner yield varies with print density, graphics, media, operating conditions and printing intervals, so an estimated page count should not be treated as a guaranteed output.

To clean the printer, disconnect power before cleaning the interior and use a dry, lint-free cloth. For the exterior, use a soft cloth dampened slightly with water, taking care not to let liquid enter the machine. Avoid spraying water into the printer or using strong solvents. If toner gets on clothing, wipe it off dry and wash the fabric in cold water; hot water can set toner into the material.

Troubleshooting common interruptions

To reduce paper jams, keep the tray below its capacity mark, use recommended media, avoid mixing paper types, and do not add or remove paper while a job is printing. Load dry, flat stock and align the guides correctly. If a jam occurs, pull the paper out slowly and gently to avoid tearing it. The fuser area can be hot, so take care when clearing paper from inside the machine.

The status LEDs provide useful diagnostic information. A red light can indicate an open cover, an empty tray or a major error; an orange status light indicates a paper jam. A blinking toner LED signals that toner is low, while a steady toner LED indicates that replacement is recommended. On the wireless model, the WPS LED indicates connection activity or wireless connection status. If the error remains after following the relevant instructions, consult the detailed user guide or contact service support.

Practical implications for workplace use

The Dell B1160 series is a document-output device rather than an industrial control component, but its reliability still depends on sound operating practices. Choose media that matches the job, configure the driver accurately, keep the paper path clean and respond to LED warnings before they become recurring interruptions. For sites using the B1160w, verify that wireless connectivity suits the intended workflow; where it does not, USB provides the documented direct connection option.

These straightforward checks can help teams maintain consistent print quality and resolve common feed, toner and connectivity issues without unnecessary trial and error. For model-specific options, media limits and service procedures, refer to the applicable Dell user documentation.

Access Official Technical PDF

About The Author