Dicronite dry lubrication is a dry-film option for equipment where conventional oils or greases may not suit the operating environment or design constraints. Its stated properties include a maximum film thickness of 0.5 micron, application at 20–35°C, and operation from -188°C to +538°C in normal atmosphere. In vacuum, the material is described as functional at temperatures up to +1316°C under 10-14 torr. These characteristics make it relevant to engineers evaluating friction and wear reduction, anti-seize protection, mold release, and lubrication in specialized environments.
What distinguishes Dicronite dry lubrication?
The coating is applied as a very thin film, with no binders, adhesives, or solvents, and requires no cure time. The low application temperature—up to 35°C—can be useful when a process must avoid exposing a component to a higher coating temperature. The source material also states that the application does not distort existing surfaces or create additional stresses.
A thin, precision-controlled film may be important where clearances and component geometry matter. At a maximum thickness of 0.5 micron (0.000020 inch), it can provide lubrication without the buildup associated with thicker coatings. The stated functional roles include reducing friction and wear, helping prevent galling or seizing, and improving the performance of oils and greases when used in combination with them.
Other listed properties include compatibility with metals, bonding to metals, platings, and most manmade materials, and very low outgassing measured under ASTM E-595. The coating is described as non-magnetic and as not affecting surface electrical properties. Its load capacity is stated to match that of the substrate, up to approximately 350,000 psi; this should be understood as a substrate-dependent property, not a standalone rating for every component.
Applications across industrial sectors
Bearings, gears, and mechanical equipment
In mechanical equipment, dry lubrication is used on rotating and linear bearings, gears, pump components, and fasteners. These are applications where friction, heat, wear, or galling can affect equipment performance. The source also identifies steel and ceramic bearings, as well as torque reduction and anti-seize protection for fasteners.
Automotive applications include gears, valves, camshafts, crankshafts, bearings, and drivetrain components. In aviation, listed uses include hydraulic valves and connectors, fasteners and rivets, and flanges and couplings in fueling systems. Across these applications, the thin film and broad stated temperature range are relevant considerations for component designers and maintenance teams.
Molding and food-processing equipment
In plastics manufacturing, the coating is used to improve release from molds and support material flow. The stated applications include low-draft or undercut parts such as caps and closures, where easier release may help reduce rejects. It is also used on pins, bushings, and mold surfaces, and as a co-deposit with surface treatments such as TiN, CrN, and CrC.
Food-processing uses include seaming and forming equipment, as well as packaging machinery. The source associates these applications with minimizing wear, reducing sticking or jams, and supporting production. It reports biocompatibility testing to ISO 10993 and FDA repeat-use and USDA incidental-contact approvals. Teams should verify that any material and application meet the requirements applicable to their specific equipment and process.
Semiconductor, medical, and vacuum systems
Semiconductor equipment applications include linear bearings, micro-gears, fasteners, and vacuum pump equipment. Low outgassing, film precision, and adhesion are cited as relevant characteristics for equipment operating under vacuum. Vacuum applications also include valves, actuators, and linear or rotational motion devices.
Medical and pharmaceutical applications include precision-molded drug-delivery devices, container handling in sorting and filling systems, and endosurgery tools or insertion devices. The source reports ISO 10993 biocompatibility testing and USP Class 6 standards, along with resistance to aggressive sterilization procedures. As with food-contact uses, suitability must be assessed against the requirements of the particular device and process.
Evaluating dry-film lubrication for a component
Before selecting a dry film, engineers and integrators should assess the actual operating conditions and the role the coating must perform. Useful questions include:
- Will the component operate in normal atmosphere, vacuum, or across a wide temperature range?
- Are tight clearances or surface dimensions affected by coating thickness?
- Is the primary need friction reduction, anti-galling protection, mold release, or compatibility with another lubricant?
- What substrate and surface treatment are involved?
- Do food, pharmaceutical, medical, or vacuum requirements apply?
The coating is also described as inert and non-toxic, compatible with metals, and resistant to inducing corrosion, though it is not a corrosion inhibitor. It accepts most paints and is compatible with most solvents, fuels, and oils, according to the source. These details can inform initial screening, but they do not replace application-specific qualification.
Practical implications
Dicronite dry lubrication is intended for applications where a very thin lubricating film, low-temperature application, or performance in vacuum and temperature extremes is important. Its uses span motion components, molds, packaging machinery, semiconductor equipment, and specialized aerospace systems. For industrial teams, the practical next step is to match the stated properties to the component’s substrate, environment, tolerances, and compliance requirements, then validate suitability for the intended duty.