Access Official Technical PDF

Share Summary:LinkedInEmail

Digital logic circuits translate binary information into defined hardware operations. For industrial automation engineers and technical decision-makers, understanding how these circuits are built provides a useful foundation for interpreting the digital systems that process data and control logic. The design starts with two states, represented as 0 and 1, and builds from electronic switches into gates, selectors and arithmetic circuits.

Why digital hardware uses binary states

At the electronic level, a digital system works by controlling the flow of electrons. A voltage on a wire can represent a logic 1, while its absence represents a logic 0. The exact voltage assigned to a logic state depends on the electrical properties of the devices in the circuit; the important idea is that the system distinguishes between two defined conditions.

Using two states is practical because a circuit can recognize whether a switch is open or closed, or whether a voltage is present or absent. Building logic around many possible voltage values would be more complex. Binary representation therefore provides a way to encode numbers and other information that electronic hardware can process.

That representation is only one level in a larger chain of transformations. A problem can be described in natural language, expressed as an algorithm and program, and then represented through machine architecture, microarchitecture, logic circuits and electronic devices. Each level describes the desired behavior in terms suited to the level below it.

CMOS transistors form the switching foundation

A transistor can act as an electronic switch. In a MOS transistor, the voltage applied to the gate controls whether a conducting path forms between the source and drain. Semiconductor material makes this switching behavior possible: depending on the gate voltage, the device can behave as an insulator or a conductor.

CMOS, short for complementary metal-oxide semiconductor, uses both n-type and p-type transistors. Their switching behavior is complementary. In the simplified digital model:

  • An n-type transistor conducts when its gate is at logic 1 and can provide a path to ground.
  • A p-type transistor conducts when its gate is at logic 0 and can provide a path to the supply voltage.

Combining these switching elements allows a circuit to produce an output voltage that represents a logic state. Transistors can be connected to implement basic Boolean functions, and those functions can be assembled into more complex hardware. This is the transition from electronic devices to logic circuits.

Logic gates implement Boolean functions

Logic gates operate on binary inputs and produce binary outputs. NOT inverts a signal; AND produces 1 only when all its inputs are 1; OR produces 1 when at least one input is 1. NAND and NOR are inverted forms of AND and OR, while XOR is another common binary function.

A gate’s behavior can be described with a truth table, a Boolean expression or a circuit diagram. These are different ways of expressing the same function: the truth table lists input and output combinations, the expression shows the logical relationships, and the diagram shows how gates connect.

NAND and NOR are particularly useful building blocks. Boolean functions can be implemented using combinations of basic gates, and NAND alone is sufficient to construct any Boolean function. De Morgan’s laws explain how AND and OR relationships can be converted using inversion. For example, the complement of an AND operation is equivalent to an OR operation on the complemented inputs.

Combinational circuits: outputs from current inputs

A combinational circuit produces outputs based on its current inputs. It does not use a stored previous state to determine the result. More complex combinational functions are built by connecting basic gates, with the circuit’s behavior still describable through Boolean logic.

Decoders and multiplexers

A decoder uses an n-bit input to select one of 2n outputs. For a two-bit input, for example, four output lines correspond to the four possible input values. The output associated with the current value is set to 1 while the others are 0.

A multiplexer, or MUX, performs a related but different selection task. It has multiple data inputs, control or select lines, and one output. The select-line value determines which input is passed through to the output. In a 4-to-1 MUX, two select lines choose among four data inputs.

These devices illustrate how binary values can control signal selection. A decoder maps a control value to an individual output; a multiplexer uses a control value to choose an input signal.

Adders and binary arithmetic

Binary addition is another combinational function. A full adder accepts two input bits and a carry-in, then produces a sum bit and a carry-out. Connecting multiple full adders allows an N-bit adder to process wider binary numbers: the carry-out from one position feeds the carry-in of the next position.

The same design process applies as for other logic functions. A truth table defines the output for every combination of inputs, Boolean expressions describe the conditions that produce each output, and gates implement those expressions. The resulting circuit performs arithmetic using the same switching elements that implement simpler logic.

From circuit behavior to hardware design

For engineers working with digital systems, the key distinction is between combinational and sequential behavior. In a combinational circuit, current inputs determine the output. In a sequential circuit, the current input and previous state determine both the output and the next state. Sequential designs therefore require a way to store state, using elements such as latches or flip-flops.

Designers can describe a combinational function as a truth table, an expression or a circuit. Those representations help clarify intended behavior and provide a basis for comparing equivalent implementations. Boolean algebra can simplify expressions and guide circuit construction, including efforts to reduce the number of gates.

Digital logic circuits are built in layers: transistors switch, gates implement Boolean operations, and interconnected gates form devices such as decoders, multiplexers and adders. Recognizing these layers helps technical teams reason about how binary data is represented, selected and processed. The practical takeaway is that complex digital behavior begins with clearly defined states and functions—and depends on connecting the appropriate hardware building blocks to implement them.

Access Official Technical PDF

About The Author