Access Official Technical PDF

Share Summary:LinkedInEmail

A Dion-Jacobson perovskite can combine two properties of interest in electronic materials: switchable ferroelectric polarization and Rashba-type spin splitting. In the two-dimensional hybrid organic–inorganic compound (AMP)PbI4, the two effects occur together at room temperature. The result is a materials-science example relevant to research into optoelectronics and spintronics, where controlling charge and spin behavior is important.

The finding also highlights why crystal structure matters. In this material, the arrangement of organic cations and inorganic lead-iodide layers changes with temperature, altering whether the crystal has inversion symmetry. That symmetry change is central to understanding both its ferroelectric behavior and the conditions associated with Rashba splitting.

Why study a Dion–Jacobson perovskite?

Two-dimensional hybrid organic–inorganic perovskites consist of inorganic layers separated or connected by organic cations. The Dion–Jacobson (DJ) structure differs from the more familiar Ruddlesden–Popper (RP) structure: diammonium cations bridge adjacent inorganic layers through hydrogen bonding, rather than the layers being separated by a van der Waals gap. This structural arrangement is associated with greater stability in DJ materials.

Ferroelectricity occurs when a material has a spontaneous electric polarization that can be reversed by an applied electric field. A noncentrosymmetric crystal structure—one without inversion symmetry—is a prerequisite. In lead-containing perovskites, strong spin–orbit coupling can also interact with this broken symmetry. Together, these ingredients can produce Rashba-type band splitting: instead of a single spin-degenerate electronic band, the electronic states separate into bands with different spin character.

When polarization is switchable, it may provide a way to influence the symmetry conditions associated with the spin structure. This combination is why materials that exhibit both properties are described as Rashba ferroelectrics.

Temperature changes the crystal symmetry

The studied compound, (AMP)PbI4, uses 4-(aminomethyl)piperidinium (AMP) as its organic cation. At room temperature, its crystal structure is monoclinic and belongs to the noncentrosymmetric Pc space group. The AMP cations adopt alternating orientations between the inorganic [PbI4] layers, producing an asymmetric arrangement that supports polarization along a direction equivalent to [100].

At higher temperature, the structure changes to a centrosymmetric P21/c phase. In this phase, the AMP molecules occupy inversion centers, so their contributions to polarization cancel. The material therefore transitions from a ferroelectric phase to a paraelectric phase, in which there is no net spontaneous polarization.

Two measurements supported the identification of this transition. Differential scanning calorimetry showed a reversible thermal anomaly, with a transition temperature of 352 K. Second-harmonic generation, which is observed in noncentrosymmetric materials, also changed with temperature and indicated a Curie temperature of 353 K. The close agreement between these measurements and the structural analysis links the transition to the restoration of inversion symmetry.

Evidence for switchable ferroelectric polarization

Piezoresponse force microscopy (PFM) was used to examine ferroelectric domains in thin films. After a voltage was applied through a conductive tip, the PFM images showed regions with different out-of-plane polarization responses. The phase contrast did not simply mirror the surface topography, helping distinguish the domain pattern from surface shape.

The electrical response provided further evidence. The PFM measurements showed a butterfly-shaped amplitude hysteresis loop and a 180-degree phase change, signatures consistent with polarization switching. In a separate device made from a DJP pellet with silver electrodes, current peaks appeared near positive and negative 10 V during voltage sweeps. These peaks corresponded to the coercive voltage, where the polarization reverses.

The reported coercive field was approximately 0.4 kV/cm. From the polarization–voltage measurement, the material had a saturated polarization of about 9.8 μC/cm² at room temperature. These values describe the tested material and measurement configuration; they should not be taken as specifications for a finished device.

Rashba splitting and the optical measurement

The Rashba effect in DJP was investigated through circularly polarized photoluminescence. The sample was excited with circularly polarized 473 nm light, and the emitted light was analyzed for its left- and right-circular polarization components. A difference in the emitted intensities under circularly polarized excitation was observed. The study interpreted this contrast as evidence of spin-split bands with opposing optical helicities.

The measured degree of circular polarization was 24% ± 2%. The Rashba energy was then estimated using a model that relates optical polarization to carrier cooling and spin-flip processes. With the assumptions used in that model, the estimated Rashba splitting energy was 85 meV. The corresponding Rashba coefficient was estimated as 2.6 eV·Å, and the spin-valley offset as 0.067 Å⁻¹.

These Rashba values are estimates derived from the optical measurement and model assumptions, rather than direct measurements of the band structure. That distinction matters when comparing materials or considering how a measured optical response translates into device behavior.

Implications for materials and device research

The significance of (AMP)PbI4 is the coexistence of room-temperature ferroelectricity and a Rashba effect in a two-dimensional DJ perovskite. Its polarization, transition temperature, and optical spin-related response make it a candidate for further investigation in spintronics and photovoltaic research. Ferroelectric polarization can affect charge separation, while Rashba splitting connects crystal symmetry and spin-dependent electronic states.

For engineers and technical decision-makers evaluating emerging materials, the practical lesson is to consider structure, operating temperature, and measurement method together. The ferroelectric phase depends on a symmetry-breaking arrangement that changes above the transition temperature, while the reported Rashba parameters rely on a model applied to circularly polarized emission. Further materials and device studies would be needed to establish application-specific performance.

Conclusion

This two-dimensional Dion–Jacobson perovskite demonstrates how organic-cation arrangement can shape crystal symmetry and enable coupled ferroelectric and spin-related properties. At room temperature, (AMP)PbI4 exhibits switchable polarization and optical evidence of Rashba splitting; heating restores inversion symmetry and removes the net polarization. The results identify a promising material platform for further optoelectronic and spintronic research, while underscoring the importance of separating measured behavior from model-based estimates.

Access Official Technical PDF

About The Author