Manufacturing parts that combine different materials, functions and feature sizes remains a challenge for additive manufacturing. Electric-field-driven jet printing offers an approach to this problem by using an induced electric field to form and control a fine liquid jet. The process is designed to deposit materials on a range of substrates and to build structures from small-scale patterns through to layered three-dimensional objects.
For industrial automation engineers and product developers, the key idea is not simply finer deposition. The method combines electrically controlled jetting with programmed motion and material feeding, creating a route to integrate structural and functional materials in one manufacturing process.
How electric-field-driven jet printing works
An EFD jet printing system typically includes a printhead and nozzle, a three-axis translation stage, a high-voltage power supply, a signal generator, and a material-feeding unit. The nozzle receives a high electric potential, while the substrate or previously printed layer acts as the target. As the nozzle approaches, electrostatic induction creates an electric field between them.
Material forms a meniscus at the nozzle, shaped by the feed pressure. Charges accumulate on its surface, and the combined effects of electric-field force, surface tension, viscous force and pressure pull the meniscus into a Taylor cone. When the electric stress overcomes surface tension, a droplet or fine jet emerges from the cone’s tip. Because the emitted feature can be much smaller than the nozzle, the process can produce fine lines and dots without relying solely on nozzle diameter.
After depositing the first layer, the system can treat that layer as the new target. The nozzle position is adjusted to maintain a suitable gap as the object grows. Controlling layer thickness and nozzle-to-target distance is therefore important to keeping the electric field and jetting behavior stable.
Two modes balance precision and coverage
Pulsed cone-jet mode
In pulsed operation, a voltage pulse triggers a short jetting event. Material lands as individual dots, making this mode suited to drop-on-demand deposition. Dot size depends on process conditions such as voltage, pulse duration and gas pressure. Dot spacing is influenced by pulse timing and the movement speed of the stage.
Continuous cone-jet mode
In continuous operation, a direct-current voltage sustains the jet and deposits material as a line. Line width is affected by factors including voltage, gas pressure and stage speed. This mode supports larger-area patterns and structures that combine macro- and microscale features, while the pulsed mode provides control over discrete deposits.
Substrates, materials and process considerations
The induced field responds to the electrical properties of the target. Conductive substrates can concentrate free charges at their surface, strengthening the field between the substrate and nozzle. Insulating materials such as glass and PET also induce a field through charge redistribution, although their response differs from that of conductors. In the reported experiments, stable cone-jet formation was demonstrated on stainless steel, silicon and glass, with different critical voltages for each substrate.
This ability to print on both conductive and insulating substrates broadens the process options compared with EHD jet approaches that rely on a conductive target or a grounded conductor beneath an insulating layer. EFD printing also addresses limitations associated with short nozzle-to-substrate distances in conventional EHD printing, enabling deposition as the printed structure rises, provided the process maintains the required field and gap.
Materials demonstrated in the chapter include photosensitive resin, nanosilver conductive paste, polycaprolactone (PCL) and conductive silver adhesive. Their viscosities vary substantially. Molten PCL requires a heated feed and nozzle arrangement, while liquid materials are delivered through the material-feeding system. Material selection and handling therefore remain part of process design: heating, pressure, voltage and motion need to be matched to the material and the intended feature.
Applications in electronics and engineered structures
Fine patterns and transparent electrodes
Pulsed deposition can form dot arrays, while continuous jetting can produce line patterns. The demonstrated metal-mesh patterns used conductive nanosilver paste, with line widths below 20 micrometres. Such fine conductive patterns are relevant to transparent electrode designs for applications including flexible displays, solar cells and touch panels. The process also offers a direct-patterning route for electronic and optical structures, rather than requiring material to be deposited across an entire surface and removed elsewhere.
High-aspect-ratio walls and porous scaffolds
With molten polymer deposition, EFD jet printing can build narrow walls through repeated layering. A demonstrated cylindrical wall structure had a 20-millimetre diameter, a 20-micrometre wall thickness and a height of 550 micrometres. For tissue-engineering scaffold development, PCL was deposited as a porous structure. Controlling the scaffold’s pore size, porosity and distribution is important to its intended role in supporting cell growth and the movement of nutrients and waste products.
Layered 3D electronics
Multi-nozzle printing can combine materials within a single structure. In one demonstrated example, photosensitive resin formed the main body and conductive silver paste formed an interconnecting wire on its surface. This illustrates how structural and conductive materials can be placed in distinct parts of a component without treating the whole object as a single-material print.
Practical implications for manufacturing teams
EFD jet printing is a potential tool for applications that require fine deposition, varied materials and three-dimensional geometry. Its pulsed and continuous modes provide different ways to prioritize discrete placement or line-based coverage. Substrate compatibility and the ability to build on existing layers also make the process relevant to heterogeneous parts and conformal deposition.
For implementation, teams should evaluate the intended feature size, material behavior, substrate, nozzle-to-target distance and required deposition mode together. The process depends on coordinated electrical, fluidic and motion control, and the chapter’s results demonstrate specific materials and structures rather than universal settings for every application. The practical value lies in its flexibility: electric-field-driven jet printing can connect micro-scale patterning with larger structures, opening a route to integrated multi-material manufacturing where conventional processes may struggle.