Access Official Technical PDF

Share Summary:LinkedInEmail

Electromigration in solder bumps is a reliability concern in electronic packages carrying high current through increasingly compact interconnects. The movement of metal atoms under electrical current can deplete material near the cathode and accumulate it toward the anode, eventually increasing resistance and contributing to device failure. In lead-free Sn-Ag-Cu solder, the effect is shaped not only by operating conditions but also by the orientation and arrangement of β-Sn grains.

For engineers assessing package reliability, this means that solder bumps made from the same alloy may not respond identically to electrical stress. Experimental observations and finite-element modeling of Sn96.5Ag3.0Cu0.5 bumps show how grain orientation influences damage location, failure mode, and predicted time to failure.

Why β-Sn microstructure matters

Electromigration results from momentum transfer between conducting electrons and mobile metal atoms. The resulting atomic flux is influenced by several coupled forces, including the electron wind force, stress gradients, temperature gradients, and differences in atomic density. As atoms move, depleted regions can develop into voids, while material transported elsewhere may accumulate or form intermetallic compounds.

β-Sn has a body-centred-tetragonal crystal structure, which makes properties such as diffusion and electrical resistivity direction-dependent. In other words, atomic movement is not equally easy in every crystallographic direction. Because lead-free solder bumps can solidify into just one or a few large grains, the orientation of those grains can strongly affect how electromigration progresses.

The key orientation relationship is between the β-Sn c-axis and the direction of electron flow. A bump with its c-axis close to the current direction can behave differently from one in which the c-axis is substantially misaligned. Grain boundaries also matter: their position relative to the current direction influences the modeled atomic-density distribution.

What accelerated testing revealed

The study examined ball grid array samples with six solder bumps, using two bumps in a daisy-chain arrangement for accelerated testing. The Sn96.5Ag3.0Cu0.5 bumps were tested at 120°C and a current density of 1.4 × 104 A/cm². A 10% increase in resistance was used as the failure criterion. Since two bumps were tested together, the recorded time to failure applied to the test sample, not to an individual bump.

Electron backscatter diffraction (EBSD) showed that untested bumps contained single, double, or multiple large grains. In single-grain bumps that had undergone testing, the observed damage varied with the angle between the c-axis and electron flow:

  • When the c-axis was more misaligned with current, void formation and rupture propagation were observed at the cathode.
  • When the c-axis was closer to the current direction, copper and nickel from the substrate were observed diffusing toward and separating out at the anode.

Failure times also varied across samples. The results indicate that grain structure is one factor associated with different outcomes; they do not establish a single lifetime for all bumps with a given orientation. Differences in microstructure can contribute to variation in test results, and the paired-bump configuration limits attribution of each sample’s failure time to one specific bump.

Modeling electromigration in solder bumps

To examine orientation effects in more detail, the researchers combined finite-element analysis with the atomic density integral (ADI) method. The finite-element model calculated initial electrical, thermal, and stress conditions. The ADI approach then tracked how normalized atomic density changed over time under the combined driving forces.

In this framework, lower local atomic density represents greater material depletion. The model treated β-Sn’s electrical, diffusion, and related properties as anisotropic, rotating their directional properties into the global model based on grain orientation. Void initiation was associated with an element’s average atomic density reaching a specified critical value. Failure time was then determined using the same 10% resistance-increase criterion as the accelerated testing.

For the modeled single-crystal bumps, orientation had a significant effect on predicted lifetime. The shortest calculated lifetime occurred when the c-axis was nearly perpendicular to the current direction; the longest occurred when it was nearly aligned. The predicted maximum was about 1.5 times the minimum in the orientations examined. These are simulation results for the modeled conditions, rather than universal lifetime multipliers for solder bumps in service.

The calculations also compared double-grain configurations with a 60° misorientation. A grain boundary parallel to current produced a more favorable atomic-density distribution and a longer predicted lifetime than the configuration with the boundary perpendicular to current. This highlights that grain-boundary placement, as well as individual grain orientation, can influence predicted electromigration damage.

Practical implications for reliability assessment

For package engineers and reliability teams, the findings reinforce the value of accounting for solder microstructure when interpreting electromigration tests or building predictive models. Treating β-Sn as an isotropic material may overlook orientation-dependent diffusion and electrical behavior. Where grain structure is known, incorporating it into finite-element analysis can help investigate likely damage locations and compare microstructural configurations.

Testing and modeling should also be interpreted within their stated limits. Accelerated conditions reveal behavior under elevated temperature and current density, while the measured failure time in this work belonged to a two-bump test sample. Model predictions depend on material-property inputs, boundary conditions, and the selected criteria for void initiation and electrical failure. They are useful for examining mechanisms and relative trends, but should not be mistaken for direct guarantees of field lifetime.

Conclusion

Electromigration in solder bumps depends on more than current and temperature: the crystallographic orientation of β-Sn and the arrangement of its grain boundaries can influence atomic transport, damage location, and predicted lifetime. For lead-free package reliability work, recognizing this anisotropy can support more realistic analysis of failure modes and more careful interpretation of accelerated-test results.

Access Official Technical PDF

About The Author