Understanding charge distribution is essential when designing devices that rely on electric fields across nanoscale gaps. In graphene nanogaps, the location and amount of accumulated charge influence the field between electrodes and may affect applications ranging from molecular electronics to field emission. Electron holography offers a direct way to examine these effects: off-axis measurements in a transmission electron microscope (TEM) have resolved voltage-induced charge with precision better than a single electron.
The approach combines in situ electrical biasing with phase measurements and finite element simulations. Its value is not limited to reporting a total charge. It can also show where charge accumulates on individual graphene tips, helping researchers assess how electrode geometry relates to electrostatic behavior.
Why charge distribution matters in graphene nanogaps
A graphene nanogap consists of two graphene electrodes separated by a narrow opening. Changing the gap dimensions or the dielectric material between the electrodes can alter the device’s capacitive behavior. More broadly, electric fields in the gap and charge on the electrode surfaces are relevant to how these structures operate.
Potential uses include nanocapacitors, molecular electronics, and proposed DNA sequencing approaches. In a sequencing concept, DNA passes through a gap of at most a few nanometers, with changes in tunneling current used to distinguish nucleotides. Graphene’s atomic-scale thickness is relevant to that application. Graphene nanogaps have also been used to contact individual molecules, while other proposed uses include plasmonic antennae and cold field emission sources.
Measuring charge on a suspended, electrically biased graphene structure presents a challenge. Techniques such as scanning tunneling microscopy, scanning single-electron-transistor microscopy, and scanning gate microscopy can investigate charge-related properties, but they have different constraints in environment, spatial resolution, or the ability to directly map electric fields around a biased suspended sheet.
How electron holography measures charge
Off-axis electron holography records the phase shift of an electron wave as it passes through and around a specimen. A coherent electron beam is split into a wave that interacts with the region of interest and a reference wave. Their interference produces a hologram, which can be reconstructed to retrieve phase information. For a nonmagnetic specimen, the phase shift is approximately proportional to the electrostatic potential projected along the beam direction.
For charge measurements, the phase contribution associated with the graphene’s mean inner potential must be distinguished from the additional phase associated with voltage-induced charge redistribution. In the reported method, a zero-bias phase image is subtracted from a biased measurement. Taking the Laplacian of the resulting phase difference provides a map of projected charge density. This processing also helps avoid artifacts associated with the perturbed reference wave, which can distort the apparent phase contours.
The work examined suspended graphene electrodes with thicknesses of one to ten monolayers and gaps from 8 to 58 nanometers. Devices were electrically biased during TEM measurements. The graphene ribbons were formed into opposing tips, and holograms were recorded at zero bias and with positive or negative voltage applied across the gap.
What the measurements reveal about tip geometry
The measurements showed that charge localization depends on the structure of the graphene tips. In wider and thicker tips, charge accumulated along the edges as well as near the apex. In thinner or smaller devices, it was concentrated mainly near the apex, with some charge distributed within the tip volume.
For one device measured at a four-volt bias, integration of the projected charge-density map gave 18.8 ± 0.8 electrons on one tip and 16.3 ± 0.8 holes on the other within the analyzed areas. The difference illustrates why geometric asymmetry matters: the two electrodes did not have identical shapes or areas. Simulations reproduced an imbalance in the same direction, with the smaller-area tip carrying a greater charge density in response to the bias.
Measured capacitance values for the nanogap tips ranged from 0.7 to 4 attofarads across the devices. For one example, the charge within the holographic field of view corresponded to 0.7 attofarads. These values describe the analyzed tips; they are distinct from the capacitance of the complete device, which includes graphene regions outside that field of view.
Using simulations to interpret phase maps
Finite element method simulations were used to compare the measured phase shifts with the electrostatic behavior expected from the device geometry. The models represented the graphene tips as charged planes and included the supporting membrane and graphene regions extending toward the electrical contacts. Accounting for the perturbed reference wave was important when comparing simulated and experimental phase images.
The simulated projected phase closely matched the experiment, and the calculated three-dimensional potential showed equipotential surfaces aligning with the tip edges. This agreement suggests that, under the charge-density conditions examined, even thin graphene behaved electrostatically in a manner similar to a metal. The simulations also estimated a capacitance of approximately 12.5 attofarads for the full modeled device, including regions beyond the holographic field of view.
Some differences remained between measured and simulated charge totals. The analysis points to possible geometric discrepancies, including uncertainties in the modeled gap, tip width, edge definition, and thickness. Other effects, such as quantum capacitance and edge states, may also require further investigation. This makes accurate structural representation an important part of interpreting nanoscale electrostatic measurements.
Practical implications for nanoscale device development
For engineers and researchers developing graphene nanogaps, the central lesson is that electrode shape and layer thickness should be considered alongside the nominal gap size. Two tips under the same applied voltage may not carry equal charge, and charge may concentrate at edges rather than distribute uniformly across the electrode. Those details can influence how a device’s electric field and capacitance are understood.
Electron holography provides a way to connect a measured charge map with a device’s physical geometry, while finite element analysis helps test whether the observed behavior is consistent with an electrostatic model. Better-than-single-electron precision and subnanometer-scale spatial information make the technique useful for fundamental studies and for evaluating design assumptions in emerging nanogap applications.
In practice, reliable interpretation depends on separating the graphene’s baseline phase contribution from bias-induced changes and representing the device geometry carefully in simulations. Combining those steps gives researchers a more detailed picture of charge localization than a capacitance value alone—and a stronger basis for designing and analyzing graphene-based nanoscale devices.