Emerging memory technologies are attracting attention because established options—including SRAM, DRAM, NAND flash and NOR flash—face different constraints as they scale. For industrial automation, the issue is not simply whether a new memory can store more data. Engineers and system designers must consider speed, endurance, power, data retention, integration with logic and the role each technology could play in a system’s memory hierarchy.
Several nonvolatile memory approaches seek to preserve information without power while offering performance characteristics that can complement or, in some applications, replace existing memory. Their practical value depends on the application and on manufacturing maturity, cost and compatibility with the surrounding electronics.
Why explore emerging memory technologies?
Conventional memories serve distinct purposes. SRAM provides fast access but uses multiple transistors per bit and loses its contents when power is removed. DRAM is widely used for main memory but is also volatile. Flash retains data without power and supports storage, though its performance and endurance characteristics differ from those of working memory.
Meanwhile, continued scaling is challenging across memory types. Three-dimensional NAND has extended flash development through vertical stacking, while embedded SRAM and NOR, as well as standalone DRAM and NAND, face their own scaling and manufacturing concerns. These pressures have encouraged development of technologies that could fill particular gaps rather than act as universal replacements.
Nonvolatile memory can also affect system behavior beyond data retention. If main memory or cache retains state without power, a system may be able to resume with less need to rebuild its previous state. Persistent memory can also support lower-power operating strategies. The benefits depend on how the memory is integrated into the hardware and supported by system software.
How new memory fits into the hierarchy
Computer systems organize memory and storage in layers. Fast, relatively small memory sits close to the processor, while larger-capacity storage is generally farther away and has different access characteristics. A new memory layer may provide a middle ground: higher density than DRAM, for example, with better performance than NAND, or nonvolatility combined with memory-like access.
This does not mean that a new device automatically improves an automation system. Controllers, interfaces, software and workload behavior all influence the result. A persistent-memory approach, for instance, requires software support that can use and manage persistent data correctly. Engineers should assess the complete data path, including how a device behaves during normal operation, shutdown and recovery.
For industrial computing, relevant questions include whether data must survive loss of power, how frequently it is written, how quickly the system must recover, and whether the memory is embedded alongside processing logic or used as a separate component. These requirements help identify where a technology might fit in a controller, edge computer or other electronic system without assuming that one memory type suits every design.
Key memory approaches and their potential roles
MRAM and STT-MRAM
Magnetoresistive RAM stores information using magnetic states. Spin-transfer-torque MRAM, or STT-MRAM, uses current to change the magnetic state of a cell. Both are nonvolatile, and MRAM processes can be integrated with conventional CMOS logic. This makes embedded memory a notable application: STT-MRAM is discussed as a possible alternative to some SRAM, while MRAM may serve as an embedded cache.
Replacing volatile memory with nonvolatile memory could reduce the need to maintain data through continuous power and support retention when power is absent. However, adoption depends on device characteristics, production volumes and cost. MRAM also calls for specialized process steps and equipment for its magnetic layers, even when built on a CMOS logic wafer.
ReRAM and phase-change memory
Resistive RAM, also called ReRAM or RRAM, represents data through changes in electrical resistance. The technology has been considered as a possible future alternative to flash, although flash has further development generations before a replacement would be required. ReRAM’s potential should therefore be understood as a longer-term possibility, not an immediate changeover.
Phase-change memory (PCM) stores data by switching material between states with different electrical properties. The 3D XPoint technology described in the report uses a form of phase-change technology. It was positioned as faster than NAND, slower than DRAM, and denser than DRAM, placing it between memory and storage in the hierarchy.
Ferroelectric memory and other candidates
Ferroelectric RAM, or FRAM, has niche applications, with hafnium-oxide-based approaches potentially widening the range of uses. Other approaches discussed include carbon nanotubes, polymeric ferroelectric RAM and ferroelectric field-effect transistor memory. These technologies differ in their materials, device structures and levels of development; they should not be treated as interchangeable solutions.
Manufacturing and integration matter
Memory performance is only one part of industrial viability. Emerging devices must be manufactured reliably and integrated into systems at an acceptable cost. For MRAM, fabrication can involve physical vapor deposition, ion-beam or plasma etching, lithography, magnetic annealing and device testing. These process requirements show why a new memory may need specialized equipment even when it shares a broader CMOS manufacturing foundation.
Three-dimensional structures and crosspoint arrays are among the approaches used to increase density. Crosspoint designs also require careful cell selection: without an effective selector, unintended current paths can complicate reading data in an array. The circuit architecture, selector design and fabrication process therefore influence whether a memory concept can scale into a usable product.
What automation decision-makers should evaluate
- Data persistence: Determine whether retaining information without power is a system requirement or a potential design benefit.
- Workload: Consider access patterns, write activity, capacity needs and the role of memory in the application.
- Integration: Assess whether embedded memory or a separate device better fits the processor, controller and system architecture.
- Software support: Confirm that interfaces and system software can manage the memory’s behavior, particularly when persistence changes recovery or data handling.
- Manufacturing readiness: Account for process compatibility, specialized equipment and the cost implications of production scale.
Conclusion
Emerging memory technologies offer options for addressing the different limitations of volatile memory and flash storage. MRAM and STT-MRAM are notable for embedded applications and nonvolatile operation; ReRAM, phase-change memory and ferroelectric approaches target other positions in the memory landscape. For industrial automation engineers and decision-makers, the practical task is to match a technology to the required workload, persistence, integration path and manufacturing context. Rather than expect a single replacement for established memory, plan for a more varied hierarchy in which different technologies serve specific roles.