Access Official Technical PDF

Share Summary:LinkedInEmail

Emerging photovoltaic absorber materials are being investigated to broaden the options for converting sunlight into electricity at very large scale. For industrial automation and manufacturing decision-makers, the topic is relevant not only because of cell efficiency, but also because material availability, fabrication investment, environmental considerations and process control all influence whether a technology can move beyond research devices.

This review reflects research progress reported mainly from 2014 to 2016. Its central point remains useful for evaluating early-stage solar technologies: no single performance metric establishes commercial readiness. A promising absorber must ultimately work as part of a reliable device and be compatible with repeatable, scalable manufacturing.

Why look beyond established solar absorbers?

A photovoltaic absorber takes in sunlight and supports the movement of the resulting charge carriers toward electrical contacts. At the time covered in the review, multicrystalline silicon was the most widely used absorber, while cadmium telluride (CdTe) and copper indium gallium selenide (CIGS) were established thin-film alternatives. Hybrid lead-halide perovskites, including MAPI, were an emerging technology attracting substantial research attention.

The review distinguishes the requirements for expanding deployment from those for improving a laboratory cell. At very high deployment levels, important considerations include capital required to build manufacturing capacity and whether constituent elements are abundant, environmentally acceptable and geographically distributed. The authors noted potential concerns involving the capital intensity of silicon manufacturing, the environmental profile of cadmium and lead, and the availability of elements such as indium, gallium and tellurium.

For manufacturers and integrators, this is a reminder to assess the complete technology pathway. Efficiency matters, but so do process requirements, material supply, reliability and the ability to establish production capacity.

Emerging photovoltaic absorber materials: three research directions

Binary chalcogenides: SnS and Sb2Se3

Tin sulfide (SnS) and antimony selenide (Sb2Se3) are binary chalcogenides related in broad technology context to CdTe. They use elements described in the review as more earth-abundant and environmentally friendly than those in some incumbent absorbers. Their evaporation behavior also allows thin films to be made using vacuum evaporation or close-spaced sublimation—processing approaches already associated with thin-film fabrication.

Progress in the period reviewed included SnS cells reaching 4.4% efficiency and evaporated Sb2Se3 cells advancing from roughly 1–2% to 5–6%. These results were promising, but important device challenges remained. For SnS, researchers were working on absorber morphology and purity, as well as heterojunction contacts. In Sb2Se3 devices, contact and band-alignment considerations also required attention.

The materials’ crystal structures add scientific interest. SnS has pseudo-two-dimensional layers, while Sb2Se3 has pseudo-one-dimensional ribbons. The review discusses the possibility that these structures could make grain boundaries less electronically harmful than in some three-dimensional bonded materials; this was a research rationale, not a guarantee of device performance.

Copper chalcogenides: simplifying composition and managing disorder

Research related to CIGS explored several copper-based chalcogenides, including kesterite materials such as CZTS, copper tin sulfide (Cu2SnS3), and CuSbSe2. A key challenge is that adding multiple elements can create disorder in the crystal structure, which may affect carrier transport and limit device performance.

One response has been to investigate simpler compositions, including ternary compounds, in the hope that reducing the number of elements could reduce some forms of cation disorder. Yet simpler chemistry does not remove every structural or electrical obstacle. The review notes that Cu2SnS3 can have its own structural disorder, while related phases may complicate interpretation of doping and voltage behavior.

Other work explored materials with different crystal structures, such as copper antimony compounds. CuSbSe2 devices reached approximately 4–5% efficiency in the period discussed. The wider lesson is that absorber selection involves trade-offs among composition, structure, optical properties and electrical behavior—not simply a search for the shortest ingredient list.

Perovskite-related materials: learning from charge transport

MAPI attracted exceptional research attention and rapidly improved cell efficiencies in the years covered by the review. Its long-lived photoexcited carriers were identified as an important part of its appeal. Several explanations were under investigation, including shallow defect states, carrier screening and other effects associated with the material’s electronic and structural properties.

At the same time, concerns about thermal stability and lead toxicity motivated exploration of alternatives. Researchers examined lead-free halide perovskites and “perovskite-inspired” materials with different crystal structures, including compounds based on bismuth, antimony and mixed anions. The review emphasized that these alternatives generally had lower performance than MAPI at that time, while offering a broad field for further materials discovery.

What the research trends mean for scale-up

The review’s publication and efficiency comparisons show why early performance records need context. Emerging absorbers had achieved measurable efficiencies with relatively few publications, while established technologies reflected decades of work and much larger research bases. A rising record is a useful signal of scientific progress, but it does not by itself establish manufacturing readiness or long-term reliability.

For teams assessing new photovoltaic processes, useful questions include:

  • Can the absorber be made using a repeatable deposition or synthesis route?
  • Are purity, morphology, interfaces and defects sufficiently controlled?
  • Does the material depend on elements with supply or environmental concerns?
  • What further evidence is needed on device performance and reliability?
  • Could manufacturing investment and process complexity support deployment at scale?

These questions connect materials research to the practical priorities of process engineering, production planning and technology evaluation. The source review does not establish answers for every candidate; rather, it identifies areas where further work is required.

Conclusion

Emerging photovoltaic absorber materials offer potential routes to diversify solar technology, but each comes with distinct technical and scale-up challenges. SnS and Sb2Se3 draw interest for their composition and thin-film processing prospects; copper chalcogenides present options with varied structures and disorder-related questions; and perovskite-related compounds extend the search for useful charge-transport behavior without relying solely on lead-based MAPI.

The practical implication is to evaluate candidate absorbers as complete manufacturing and device systems. Efficiency is an essential measure, but scalable production also depends on materials, interfaces, process control, reliability, environmental considerations and the capital needed to build capacity.

Access Official Technical PDF

About The Author