Energy storage for industrial facilities can serve several operational goals: reducing peak power demand, supporting on-site renewable generation and supplying selected loads during grid outages. A 2019 New Jersey energy storage analysis examined these uses at customer sites and across distribution networks. Its findings offer a practical framework for engineers, facility managers and system integrators assessing storage alongside existing electrical infrastructure.
The central takeaway is that a storage system should be sized around the job it must perform—not selected by capacity alone. A facility’s critical loads, load profile, outage exposure and available ways to earn value all affect whether a project makes technical and economic sense.
Energy storage for industrial facilities: match the system to the load
During an outage, storage can keep designated equipment operating, but it does not necessarily support an entire facility. The analysis emphasizes identifying the critical or vital load and understanding how that load changes over time. Those details influence both the power rating—the amount of load the system can serve at once—and the energy capacity, which affects how long it can supply that load.
In the studied use cases, systems with four hours of discharge duration and capacity equal to at least 50% of facility peak load could provide resilience benefits for many facilities. However, the associated costs could make these configurations economically unattractive. Smaller systems, around 25% of peak load with four hours of duration, could serve up to 50% of critical load on average in the analyzed cases, at lower cost.
These results are not a universal sizing rule. They show why design should start with a facility’s load data and outage priorities. A system intended to support controls, communications or other selected equipment during a short interruption has different requirements from one intended to maintain a larger share of operations for an extended outage.
Pair storage with onsite generation for longer outages
Storage alone has less value for long-duration resilience because its stored energy is finite. Pairing it with photovoltaic (PV) generation or other distributed generation can improve its ability to support a facility over a longer interruption. The analysis found that resilience benefits could increase when storage is coupled with PV, while noting that economic viability depends on factors such as technology cost, outage frequency, the value of lost load and the facility owner’s tax status.
For project teams, this means evaluating the complete operating arrangement rather than treating a battery as a standalone backup device. Relevant questions include which loads must remain energized, how long they need support, whether PV is available, and how the storage system will be charged and dispatched. The analysis also notes that the emissions effect depends on whether storage is charged from renewable sources or from the grid.
Peak shaving and bill management depend on sizing
Storage can also discharge during periods of high facility demand to reduce peak power imports. This application, often called peak shaving, may help manage demand charges. The economics depend closely on the system’s capacity and duration, the facility’s demand pattern and the applicable electricity rate.
In some of the report’s use cases, lower-capacity, short-duration systems produced more favorable economic outcomes than systems sized to match a full megawatt of normalized peak load. Time-of-use rates or utility-controlled storage could also improve the financial case. These findings underline the value of testing dispatch strategies against actual interval load data: a battery that is larger than necessary for the target peak may add cost without a corresponding increase in bill savings.
Storage may create more value when several applications are combined. A facility might use a system for peak reduction during normal operation and reserve some capacity for resilience. But stacking services requires careful operational planning: the same stored energy cannot be assumed to serve every purpose at the same time. Dispatch priorities, reserve levels and equipment limits need to be defined for the intended use cases.
Storage can support renewables and distribution networks
At the distribution level, storage paired with PV can help manage the effects of local generation and increase the amount of solar that a network can accommodate. In the sample networks examined in the analysis, storage was associated with increases of up to 100% in PV installations. The report also found greater value when storage was distributed across a network and integrated with PV, rather than concentrated at a single grid connection point.
For an industrial site, the broader implication is that a storage project may have value beyond the facility meter, depending on location and system needs. Storage can potentially help defer distribution upgrades, support peak demand and improve network stability. Determining whether those benefits apply at a particular site requires more detailed network and interconnection data than the report’s high-level case studies could provide.
Technology choice and project evaluation
The analysis reviewed mechanical, thermal, electrochemical and chemical storage technologies. It identified pumped hydro and thermal storage as mature options that were cost-effective for certain uses, while noting that pumped hydro is constrained by geography. Lithium-ion batteries were described as the least costly of the battery technologies evaluated and as suitable for a range of applications, including fast-response ancillary services and longer-duration uses. At the time of the 2019 report, however, battery storage was not cost-competitive for most applications, despite falling costs.
Industrial decision-makers can use a structured evaluation to compare options:
- Define the objective: backup for critical loads, peak reduction, renewable integration or a combination.
- Characterize the load: document peak demand, critical circuits and the duration of support required.
- Model operating strategies: compare charging and discharge schedules against site needs and applicable rates.
- Assess the full economics: consider installation costs, avoided outage losses, incentives and potential value from stacked applications.
- Check site and network constraints: confirm that the proposed interconnection and location suit the intended use.
Practical implications for facility teams
Energy storage is not a one-size-fits-all substitute for backup generation or a guaranteed source of bill savings. Its strongest use cases depend on matching system power and duration to a defined operational need, then evaluating whether additional services can improve the project economics. For industrial facilities, the practical starting point is a clear inventory of critical loads, interval demand and outage priorities.
When storage is assessed alongside PV, peak management and resilience requirements, it may provide value across multiple operating conditions. But each benefit must be tested against the facility’s actual load profile, costs and system constraints. A disciplined, site-specific assessment helps teams distinguish a technically feasible installation from one that can also deliver a durable economic case.