EtherCAT G extends EtherCAT communication to gigabit data rates for automation applications that must move large amounts of process data. Introduced as an addition to the EtherCAT standard, EtherCAT G supports 1 Gb/s communication, while EtherCAT G10 extends the technology to 10 Gb/s. The higher rates are aimed at demanding applications such as machine vision, high-end measurement systems and complex motion applications, where data volumes per network participant can be substantial.
The extension is designed to retain the EtherCAT protocol and its established characteristics rather than replace the existing technology. For engineers and system integrators, an important design consideration is how higher-speed segments can work alongside existing 100 Mb/s devices. EtherCAT G addresses this through EtherCAT Branch Controllers, which connect and manage network segments.
What EtherCAT G adds to an automation network
EtherCAT G and G10 increase the available communication rate to 1 Gb/s and 10 Gb/s, respectively. This added bandwidth can be relevant when a system needs to transfer more process data per participant than a standard EtherCAT network is intended to carry. The source identifies machine vision, high-end measurement technology and complex motion applications as examples of areas where these data demands may arise.
The protocol itself and its established features are retained in the gigabit extension. EtherCAT G is compatible with IEEE 802.3, and it preserves familiar topology options. Depending on the application, network designers can use line, daisy-chain, drop-line or tree structures. This continuity means that moving to a higher communication rate does not require abandoning the EtherCAT approach to network layout.
How EtherCAT Branch Controllers connect network segments
The gigabit extension introduces the branch concept, implemented using EtherCAT Branch Controllers (EBCs). An EBC acts as a node that integrates independent EtherCAT segments into an EtherCAT G network. This allows a system to combine gigabit segments with segments containing 100 Mb/s devices, rather than requiring every field device to have a gigabit interface.
Branching also changes how frames are handled across the network. Instead of a frame passing through every segment in sequence, the connected segments are processed in parallel. Each branch is treated as an independent EtherCAT segment, and data forwarding into the segments is controlled by priority and/or time. In large networks, this parallel processing can reduce propagation times and increase system performance, according to the technology description.
For an automation architecture, this provides a way to place higher-bandwidth communication where it is needed while retaining proven 100 Mb/s devices in connected segments. The approach can be useful when particular parts of a machine generate or consume large data volumes, while other areas continue to use existing EtherCAT devices.
Configuration and network management
The EtherCAT master manages the configuration of the EtherCAT Branch Controllers. The stated arrangement does not require additional IT configuration tools for this task; the master must provide an appropriate gigabit port. This keeps branch configuration within the EtherCAT master’s role in the network.
Key network functions are also supported across the branch controllers. Diagnostics and network synchronization using Distributed Clocks are supported by the EBCs and forwarded transparently into connected segments. For engineering teams, these capabilities matter because a network extension must account not only for data rate, but also for visibility into network status and timing across its segments.
Planning a transition to EtherCAT G
When assessing whether EtherCAT G or G10 is appropriate, start with the data needs of the application. The extension is particularly relevant when a network participant must transmit large amounts of process data. Consider where those demands occur and whether the network should use gigabit segments alongside existing 100 Mb/s devices.
Topology and segment organization should also be part of the design. Because EBCs connect independent segments and allow parallel processing, the way branches are arranged affects how data moves through the network. Engineers should account for the master’s gigabit port requirement and verify that the planned configuration supports the application’s diagnostic and synchronization needs.
The source describes EtherCAT G/G10 as retaining the existing protocol and topology flexibility while extending bandwidth. It does not require every field device in a system to be upgraded to a gigabit interface: 100 Mb/s devices can remain in connected segments through the branch-controller concept. This provides a defined path for combining network speeds within one EtherCAT G architecture.
Practical implications for automation teams
EtherCAT G and G10 give designers additional bandwidth options for applications with demanding process-data requirements. Their branch-controller architecture supports a mix of gigabit and 100 Mb/s segments, while preserving familiar EtherCAT topologies and master-managed configuration. For machine builders, system integrators and plant engineering teams, the practical task is to match network segments and data rates to application needs, rather than treating gigabit communication as a requirement for every device.
By combining higher-speed segments with existing devices where appropriate, EtherCAT G extends the network’s capacity while maintaining continuity with established EtherCAT technology. Careful planning of branches, master connectivity, diagnostics and synchronization can help teams apply that extension to systems where data volume and network timing are central design considerations.